HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front left (blue-red)
Maximum load capacity - optimum handling This Heavy Duty spring was specially developed for the Land Rover Defender 90, 110 and 130 and offers a noticeable improvement with high payloads, trailer operation or demanding off-road use. Whether on the construction site, off-road or when overlanding - with this reinforced spring, your Defender stays reliably on track. Color code: blue/red Price per piece
Prices incl. VAT;
HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front right (yellow-white)
Maximum load capacity - optimum handling This Heavy Duty spring was specially developed for the Land Rover Defender 90, 110 and 130 and offers a noticeable improvement with high payloads, trailer operation or demanding off-road use. Whether on the construction site, off-road or when overlanding - with this reinforced spring, your Defender stays reliably on track. Color code: white/yellow Price per piece
Prices incl. VAT;
Montagepauschale Trekfinder Lenkungsdämpfer für Land Rover Defender
Professionelle Montage für Lenkungsdämpfer Pauschale für den Einbau und Inbetriebnahme des Trekfinder Lenkungsdämpfers in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Terrafirma All Terrain Shock Absorber, Front Axle
Terrafirma All Terrain Shock Absorber, Front Axle Shock absorber, front axle, for Defender 90/110/130, Discovery 1, Range Rover Classic.Scope of delivery: 1 shock absorber
Prices incl. VAT;
Terrafirma All Terrain shock absorber, rear axle
Terrafirma All Terrain Shock Absorber, Rear Axle Shock absorber, rear axle, for Defender 90/110/130, Discovery 1, Range Rover Classic.Scope of delivery: 1 shock absorber
Prices incl. VAT;
Mounting material for 2 pieces Koni / RAID shock absorbers below
Mounting material for 2 pieces KONI/ TREKFINDER Heavy Track RAID shock absorber 90-5375SP1 + 90-5471 below Mounting material for the pin fastening of the shock absorber - suitable for LAND ROVER Defender models up to approx. 2001 ( no pot mounting ) Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces self-locking nut
Prices incl. VAT;
Nakatanenga Spacers for Stabiliser Rear Axle, for Defender 110/130
Nakatanenga spacers for stabiliser rear axle for Defender 110/130 The spacers prevent the rear anti-roll bar from folding down when the vehicle is raised, for Land Rover Defender 110/130, suitable for all model years, incl. necessary mounting material. Dimensions per piece: 12x8x4 cm Scope of delivery: 2 spacers incl. fixing material
Prices incl. VAT;
Mounting material for 1 piece Koni / RAID shock absorber top and bottom
Mounting material for 1 piece KONI/ TREKFINDER Heavy Track RAID damper 90-5374SP1 + 90-5470, top and bottom Mounting material for the pin mounting of the shock absorber on both sides Suitable for all LAND ROVER Defender models Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces nut self-locking
Prices incl. VAT;
Set of 3 polyurethane dust covers for tie rod end
Rubber protective cap for tie rod end Suitable for: Series I, Series II, Series III, Defender 90, Defender 110, Discovery 1, Range Rover Classic Land Rover Comparison Numbers:RTC5869QHRTC5868DRTC5870QH This PU version has better chemical and mechanical resistance than the conventional rubber dust cap.The service life is thus significantly increased by the material used.
Prices incl. VAT;
Dual Shock Mount, rear Axle
Bracket for double damper system - rear axle Maximum control, double damping: with this bracket for a double damper system on the rear axle, you can equip your vehicle for maximum loads and demanding off-road use. Supplied in pairs
Prices incl. VAT;
Side wheel bearing Rover or P38 Differential
High-quality side bearing New side bearings are required when installing a differential lock (Detroit Locker or TrueTrac) if your vehicle has a P38 or Rover axle. Not required for the Salisbury axle. Please order this item twice. We obtain the side bearings from brand manufacturers such as Timken.
Prices incl. VAT;
Metal sleeve for rubber mount for 1 piece Koni / RAID shock absorber top
Metal sleeve rubber mount for Koni Heavy Track RAID shock absorber 90-5375SP1 + 90-5471, top suitable for all years of construction! Scope of delivery: 1 piece
Prices incl. VAT;
Silencer / Spacer f. height compensation (P38 or Salisbury axle)
Silencer / Spacer f. height compensation (P38 or Salisbury axle) Description: the item can be used on the rear axle on 110s and 130s. optimal possibility for level compensation/ the height adjustment is 10 millimetres the ring consists of a zinc, phosphated metal ring with coil spring centring and vulcanised NR/ SBR rubber the rubberised surface of the ring reduces the transmission of vibration noise the washer is placed between the spring end and the spring plate, max. one washer per spring end is possible, i.e. max. two washers per spring, i.e. max. 20 mm height increase per spring is possible price per unit
Prices incl. VAT;
Rubber mount for 1 piece Koni / Trekfinder RAID shock absorber top
Rubber mount for Koni / Trekfinder RAID shock absorber top 90-5375SP1 + 90-5471 suitable for all years of construction! Scope of delivery: 1 piece
Prices incl. VAT;
Spacers for stabilizer bar front axle, for Defender 90/110/130 from TDI upwards
Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair
Prices incl. VAT;
Castor Correction Wedges 3 °
Correction wedges 3° for leaf spring axles - for optimising the axle geometry If you raise your car’s suspension or exchange your original shocks, most of the time axle or wheel geometry, i.e. caster or camber angles, will get out of alignment. To correct aberrations on axles with leaf springs, especially our 3-leaf parabolic springs for the 88” rear axle Land Rover Series II, IIA und III, we are now carrying these caster correction wedges. The wedges provide 3° correction and have a 13 mm pin opening.
Prices incl. VAT;
Silencer / Spacer f. height compensation (Rover axle)
Silencer / spacer for height compensation (rover axis) The article can be used on the front axle on the 90/110/130 and on the rear axle on the 90. Optimal possibility for level adjustment / the raising is 10 millimetersThe rubberized surface of the ring reduces the transmission of vibration noisesThe washer is placed between the spring end and the spring plate, a maximum of one washer per spring end is possible, i.e. H. a maximum of two washers per spring, so a maximum height of 20 mm per spring is possible. Price per piece
Prices incl. VAT;