Chequer plate wing top protection for all Land Rover Defender 90/110/130 MY 2007-2016
Chequer plate wing top protection for all Land Rover Defender 90/110/130 MY 2007-2016 . Made of 3mm aluminum with additional powder coating. Supplied in pair with rivets. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer. Please note: the protective covers for Defender form MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl chequer
Prices incl. VAT;
Nakatanenga Type Q Lamp Guards for Fog and Reverse light, Pair
Lamp protection grille for fog light, reversing light Our type Q lamp guards for signal lights not only improve the appearance of your Land Rover Defender, but also protect the lights from damage while off-road driving. High-quality black powder coating suits the other black OEM attachments as well as our own range of add-on parts. The guards fit the Defender original signal lights as well optional LED signal lights sold by us. Vehicle: Land Rover Defender 90/110/130 Signal lights: fog light and reverse lightMaterial: V2A stainless steel 1.4301, glass bead blasted, black powder coated, 2 mm material thicknessFixings: suppliedSold as: pairs (2 pieces)
Prices incl. VAT;
Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender
Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)
Prices incl. VAT;
Nakatanenga Lamp Guard Type Q for Indicator/Brake/Position Lights, Pair
Protective grille for blinker, brake and parking lights Type Q lamp guards enhance your Defender lights and protect them from damage in offroad conditions. The high-quality black powder coating matches the other black OEM attachments as well as our own range of procucts, of course. The guards fit the original Defender signal lights as well as the aftermarked LED signal lights available from us. Vehicle: Land Rover Defender 90/110/130 Signal lights: indicators, brakes, position lights Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, thickness 2mm Fixings: not necessary, the original light fixings are used Sold as pairs (2 pieces)
Prices incl. VAT;
Nakatanenga side indicator protection - Typ Q - pair
Lamp protection grille for mudguard indicators The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-
Prices incl. VAT;
Dirt D-Fender Wheel Arch Extensions for Land Rover Defender
Dirt D-Fenders extend the wheel arch of Land Rover Defender 90 / 110 / 130 and act as a splash guard. Available in different finishes. Dirt D-Fenders close the gap between the bottom of the wheelarch and the mudflap, protecting your Defender against dirt and damage to the paint. Supplied in pairs and come with fitting kit. Dirt D-Fenders can't be used on vehicles fitted with rock sliders. They have not been designed to work with chequerplate sills, but can be modified to fit. Dirt D-Fenders are available in smooth (ideal for painting) or textured finish.
Prices incl. VAT;
Nakatanenga Protective Grille Mudguard Indicator, for Land Rover Defender
Nakatanenga protection grille wing indicators, for Land Rover Defender The Nakatanenga protective grilles for the mudguard indicators of the Land Rover Defender 90/110/130 are on the one hand a protection of the headlights against mechanical damage (e.g. by branches), on the other hand a design element, which belongs to the classical optics of the vehicle. They are a perfect fit for both the original turn signals and the Nakatanenga LED mudguard turn signals. The lamp guards are manufactured locally from stainless steel and can be given a high-strength black powder coating on request. This can be painted over (e.g. in car colour). Scope of delivery: Two indicator protection grilles, foam rubber base, anti-theft mounting material. Only available in stainless steel, black powder-coated!
Prices incl. VAT;
Checker plate bonnet Land Rover Defender Td4 - Plate on hump
Checker plate bonnet Land Rover Defender Td4 - plate on hump for Land Rover Defender from MY 2007, delivery includes rivets.The product is optionally available with anodised or black powder-coated surface, please select below.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Reef corners for Land Rover Defender
Reef corners for Land Rover Defender 110 The ribbed corners on the rear of the Land Rover Defender protect it during off-road use and round off the appearance visually.Suitable for Defender up to MY2016.They are available for the Defender 110, in narrow or wide versions - see pictures. They are also available in various surface finishes - anodised aluminium, black and anthracite can be seen in the picture.They are always supplied in pairs and include the rivets required for fitting. Please select wheelbase, desired width and desired colour of the ribbed corners below. For Defender 110, in narrow or wide version, available in different colours, incl. mounting material, price per pair.
Prices incl. VAT;
Nakatanenga Dirt Trap Plate with Stainless Steel Holder, front axle
Nakatanenga mud flap with stainless steel holder Our heavy-duty mud flaps (for the front axle) can also be fitted together with these mud flaps.
Prices incl. VAT;
Bonnet Hinges Defender, anti-theft
Hinges for Defender bonnet Nakatanenga bonnet hinges for Land Rover Defender (all models, all model years) address two problems associated with the original hinges: for one they are more durable and have no play, additionally they greatly complicate bonnet theft. We have put emphasis on ease of fitting - this can be done by yourself. There are no holes that need drilling as only existing ones are used, all fixings, icluding the special safety-socket are supplied. The hinges are available in stainless steel or with black powder coating, please choose the desired finish.
Prices incl. VAT;
Track rod guard Land Rover Defender, 4mm Steel Galvanized
Hot-dip galvanised track rod guard - for Land Rover Defender Track rod guard for Land Rover Defender 90/110/130, 4 mm zink-dipped steel, all model years. The track rod guard / skid plate protects the tie rod which is vulnerable in serious off-road driving, thus maintining steering ablility and avoiding expensive repairs and breakdowns Can not be fitted together with our heavy-duty tie rod set TRHDDESET!
Prices incl. VAT;
Chequer plate cover plate for Land Rover Defender tailgate outside, from MY02
Checker plate cover plate for Defender 90/110 Cover plate for the rear door of the Land Rover Defender 90/110 (outside), material: anodised aluminium (3mm), different colours available, is mounted instead of the original spare wheel holder. The use of anodised aluminium has the advantage that the plate does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below. In model year 2002 there was a change to the rear door, unfortunately it is not possible to differentiate purely by model year here. Until 2002 the door was made of aluminium and the window was glued in. From 2002 onwards, the rear door was made of steel and the window is fixed by means of a rubber seal. The dimensions of the cover plate is 45x28 cm (from 2002). Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Heavy Duty Mud Flaps for Land Rover Defender
Splash guard Heavy Duty Nakatanenga heavy duty mudflaps for Land Rover Defender 90/110/130, set containing 2 pieces. Our mudflaps are available for either front or rear axle fitting. Our mudflaps are made of HDPE (high-density polyethylene) and are very durable with less danger of ripping them off when reversing. Can be fitted to the front with the original mountings or our heavy duty mudflap mountings. At the rear the original mountings are used.
Content: 2 Piece (€22.50 / 1 Piece)
Prices incl. VAT;
Nakatanenga splash guard for Land Rover Defender, fender front axle
Nakatanenga splash guard for Land Rover Defender, fender front axle On the Land Rover Defender, a meticulous MOT inspector may deem the wheel cover on the front axle mudguard to be inadequate. This can happen if one or more of these factors are present: larger tires wider tires bumper with optimized slope angle (our NAWIBU2 or XHD for example) higher suspensionFor this reason, we have developed a splash guard for temporary or permanent installation that solves this problem and restores the necessary wheel coverage.Scope of delivery: 1 pair
Prices incl. VAT;
License plate holder for NAWIBU winch bumper
License plate holder for NAWIBU winch bumper Our heavy duty Nakatanenga winching bumper for classic Defenders is the perfect mounting solution for winches. The entire winching unit stays well protected behind the bumper and the winching cable runs smoothly through the integrated winch window in the middle of the bumper. Normally, this is where the license plate is positioned and that brings us to the problem and our simultaneously elegant and quick solution. Our custom made number plate holder is simply screwed into the fastening holes of the winching window, making it possible to mount the number plate more or less in its usual position. The winch’s functionality is in no way restricted or impeded, of course. The number plate holder is made from aluminum and features a matte black powder coating (RAL9005) which perfectly matches the look of the winching bumper. Material: AluminumFinish: RAL9005 matte smooth
Prices incl. VAT;
Chequer Plate Cowling Tank Spout Land Rover Defender
Chequer plate tank filler neck for the Land Rover Defender 90/110 All model years, emphasises the rustic vehicle appearance.The use of anodised aluminium has the advantage that the panel does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below.
Prices incl. VAT;
Replacement splash guards - different versions
Front left and right mud flaps for the Land Rover Defender This set consists of a pair of high-quality mud flaps for the front axle - suitable for the Land Rover Defender 90, 110 and 130 models from model years approx. 1987 to 2016.Made from flexible, robust rubber, the mud flaps offer reliable protection against splash water, mud and stone chips. They specifically protect the sides, doors and lower edge of the vehicle from dirt and damage - especially when driving off-road or in bad weather.In addition to improved protection, the use of mud flaps also helps to maintain the value of your Defender: By reducing moisture and dirt deposits, corrosion is effectively prevented. The reduced dirt ingress also makes vehicle maintenance considerably easier.The mud flaps are a cost-effective replacement for worn or damaged original parts - in solid quality and a perfect fit for the models mentioned.Mounting instructions:Suitable brackets are required for mounting, which are not included in the scope of delivery. You can find the appropriate brackets here.Care recommendation:Regular cleaning and checking for cracks or wear extend the service life of the mud flaps and maintain their protective effect.Scope of delivery: 1 pairDifferent variants, choose the version that suits you!
Prices incl. VAT;
Checker plate supports bumper
Chequer plate bumper pads For Land Rover Defender, protects the bumper and provides a secure hold. Delivery in pairs, incl. rivets Material: Aluminium Material thickness: 2.5 mm base thickness / 4 mm incl chequer plate (quintet plate)
Prices incl. VAT;
Nakatanenga rim reinforcement for splash guard holder
Nakatanenga rim reinforcement for splash guard holder Edge reinforcement for splash guard holder, for Land Rover Defender 110.Dimensions of a single edge reinforcement: 10 x 2.3 cm. Supplied in pairs.
Prices incl. VAT;
Security Mounting Kit for Nakatanenga Window Grille
Optional safety mounting kit for the Nakatangena window grilles for the Land Rover Defender 90/110 Consisting of:Blind rivet insert nuts, safety torx screws and matching bit Kit for one window grille
Prices incl. VAT;
Anti-slip pad for Adventure 4x4 Rockslider, for Land Rover Defender and Ineos Grenadier, 1 pair
Secure hold on rock sliders – especially for Defender & Grenadier These self-adhesive anti-slip pads with their precise fit are specially designed for the Adventure 4x4 rock sliders for Defender and Grenadier. The pads are perfectly matched to the sliders’ hole pattern and they improve the Rocksliders’ good anti-slip properties even further, especially in wet or dirty conditions. The 5.5 x 50 cm adhesive strips are supplied in pairs. The dimensions are matched to the door area, but with sufficient quantity and some adjustments it is also possible to cover the entire surface.
Prices incl. VAT;
Stainless Steel Bolt for Defender NAS Roll Cage
Perfect fit & maximum corrosion resistance - High-quality stainless steel screw for Defender NAS cage The Stainless Steel Bolt corresponds to the Land Rover part number ALR5549. With the Stainless Steel Bolts you can mount the NAS Roll Cage to the Defender. Please mind that you need at least approx. 70 Bolts for one Roll Cage. Material: Stainless steel A2-80 high-strengthLength (l): 30 mmDiameter (d): 10 mmTorx-profile: TX50 The black stainless steel screws were coated with a chromium-oxide layer via a computer-controlled electrochemical process. As a result, the stainless steel screws are still protected against rust.
Prices incl. VAT;