Nakatanenga radiator cover 2.0 for all Land Rover Defender models
Radiator Cover for Standard Grille The Nakatanenga radiator cover helps your Defender’s engine reach its optimal operating temperature faster during the cold season – improving both engine efficiency and cabin heating performance. This cover is designed to fit the standard radiator grille (including Heritage style) and all Nakatanenga aluminium grilles of all Land Rover Defender models, with or without air conditioning. The cover is screwed onto the mounting points of the radiator cover. For maximum versatility, the radiator cover can be used in three configurations: fully closed, half closed (top or bottom), or fully open. Manufactured to U.S. military specifications (MIL-SPEC) and according to Nakatanenga’s own high standards. Includes FitKit.
Prices incl. VAT;
Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016
Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016 It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy. Length 2 slats: 215mmLength 3 slats: 270mm The ventilation plates are available individually, optionally for the left or right window. Please select the sheets according to your windows: If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF) If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF) Please note:In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!
Prices incl. VAT;
Mud flap holder for Land Rover Defender 90 and 110, until MY2016
Spray Flap Holder for Land Rover Defender 90 and 110 Stainless steel holder for Land Rover Defender 90 and 110 (all years of manufacture), for optional front or rear axle, Supplied in pairs, including mounting hardware. IMPORTANT NOTE: If you still want to build corner protectors on the Land Rover Defender 90 or if you have already attached them, you need the flap holders WITH recess (select "vehicle type"). The original spray flap brackets are made of painted steel. Anyone who has been driving a Defender for a long time knows that every few years the brackets rust through, as the paintwork flakes off over time and dirt, oily deposits and constant moisture provide the perfect conditions for corrosion. Our own custom-fit splash guard brackets are not only made of stainless steel, but are also powder-coated black. This makes them extremely robust, corrosion-resistant and durable. This finally puts an end to the constant replacement of the holders. Of course, existing splash flaps can still be used.Suitable for Land Rover Defender up to MY2016. If you want to be on the safe side, we also have matching edge reinforcements for the splash guard holders. Supplied in pairs.
Prices incl. VAT;
Rear Ladder for Land Rover Defender, short
Rear ladder for easier access to the roof of the Defender 90 and 110 Rear ladder suitable for Land Rover Defender 90/110 allows for easy access to roof rack. This ladder is supplied WITHOUT an additional rear step. This can be ordered separately. The ladder is produced for us from high-grade aluminium alloy and WIG welded, resulting in a very lightweight (1.8 kg only) and durable ladder. The steps feature an anti-slip design. Available with or without black powder coating. Please choose.
Prices incl. VAT;
Nakatanenga Ventilation Panels Side Windows - Land Rover Discovery 1/2/3/4
Nakatanenga ventilation panels side windows - Land Rover Discovery 1/2/3/4 The Discovery combines comfort with serious off-road performance. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's possible with our ventilation panels with mosquito nets, tailor-made for the Discovery from high-quality aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure a better climate in the interior during expeditions and long journeys. Installation is straightforward: roll down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Dirt D-Fender Wheel Arch Extensions for Land Rover Defender
Dirt D-Fenders extend the wheel arch of Land Rover Defender 90 / 110 / 130 and act as a splash guard. Available in different finishes. Dirt D-Fenders close the gap between the bottom of the wheelarch and the mudflap, protecting your Defender against dirt and damage to the paint. Supplied in pairs and come with fitting kit. Dirt D-Fenders can't be used on vehicles fitted with rock sliders. They have not been designed to work with chequerplate sills, but can be modified to fit. Dirt D-Fenders are available in smooth (ideal for painting) or textured finish.
Prices incl. VAT;
Nakatanenga Fuel Cooler Guard for Land Rover Defender TD4, aluminium
Fuel Cooler Protection – Defender TD4 Off-road, every component matters – especially those exposed underneath the vehicle. The Nakatanenga fuel cooler guard protects the vulnerable fuel cooler on your Land Rover Defender TD4 2.4 (from model year 2007) from rocks, branches, and other trail hazards. This helps prevent costly damage and unexpected breakdowns when you're far from help. The precision-fit guard is made from lightweight, black powder-coated aluminium, weighing just around 600 grams – perfect for anyone looking to combine durability with minimal weight. Material: Aluminium, black powder-coated Weight: approx. 600 g
Prices incl. VAT;
Side-step for Landrover Defender, foldable
Side access step for Defender This side step makes it easier for you to access your vehicle doors. You can attach the step to both the front and rear side doors. If required, the step can be easily folded away. Suitable for all Defener models!You can find a suitable crossbar here.
Prices incl. VAT;
Rear Step Land Rover Defender
Defender rear step - ideal for rear door & roof rack This rear step makes it easier for you to access your vehicle. The step can be easily folded away if required. 1 pieceYou can find a suitable crossbar here.
Prices incl. VAT;
Nakatanenga Air Vents for Side Windows - Land Rover Defender 110/130
Fresh Air for Your Defender 110/130 – Secure and Insect-Free! Fresh air for your Defender 110/130 – safe and insect-free! The Defender 110 is synonymous with rugged off-road culture. Good air circulation, as if the windows were slightly open, but without any increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito netting, made of sturdy aluminum and tailored to fit the Defender 110/130, achieve just that — no rattling universal parts. Supplied in pairs, powder-coated in black, they offer discreet protection and comfort on expeditions or when used as an everyday vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 505 mm.
Prices incl. VAT;
TREKFINDER fender extension kit Land Rover Defender 20mm, 150cm long
Whether you’re going for a more muscular look or just better off-road performance, there are many good reasons to widen your Defender’s stance. You can go for fat MT tires or you can widen the track with wheel spacers or negative offset rims to achieve the desired effect. But keep in mind that your wheel covers may no longer be sufficient for your country’s road regulations and that in turn could affect your 4x4’s road legality. Apart from costly surprises in traffic stops, you also want to avoid potentially dangerous water and mud spray or debris being catapulted from exposed wheels. And then there’s also that slightly unbalanced look… At Nakatanenga, we thought there’s got to be a better solution than what’s out there and that’s why we teamed up with the experts at TREKFINDER to give you a functional, easily attached and exclusive solution to extend your existing original wheel arch guards. The result is a discrete self-adhesive rubber extension strip that widens the original Land Rover wheel arch guard by another 20 mm, simply by sticking it onto the original part. There’s no need to remove the original parts, drill new screw holes etc. The new guard’s protruding adhesive lip fits perfectly onto the original part and makes it very easy to position the 1.5 m extension perfectly. This should also work with identical after-market parts by Britpart et al, but with non-original parts we are unable to provide a warranty, of course. With a little experience and some planning, though, you can easily adjust the strips’ required length or their radius with a boxcutter and some sanding paper. Again, alterations are not covered by our product warranties. And last but not least, since our wheel arch extensions are self-adhesive, they are just as easily removed as they are mounted. Our Defender wheel arch extensions by Nakatanenga and TREKFINDER are available in a set of four with identical front and rear attachments and are exclusively available in our shop. Material:Black rubber, very good quality - flexible and almost indestructible Complete vehicle kit:4 pieces of 1,500 mm length each
Content: 6 running meters (€16.50 / 1 running meters)
Prices incl. VAT;
Radiator grille, Land Rover Defender, 2mm ALU powder-coated
Our radiator grille is the visual “icing on the cake” for the Defender front and replaces the standard plastic grille. The black powder-coated aluminum grille is oval or square perforated and fits both Defenders with and without air conditioning. The delivery includes a set of high-quality stainless steel screws for simple and permanent installation on the vehicle.
Prices incl. VAT;
Nakatanenga Dirt Trap Plate with Stainless Steel Holder, front axle
Nakatanenga mud flap with stainless steel holder Our heavy-duty mud flaps (for the front axle) can also be fitted together with these mud flaps.
Prices incl. VAT;
Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC
Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.
Prices incl. VAT;
Bonnet Hinges Defender, anti-theft
Hinges for Defender bonnet Nakatanenga bonnet hinges for Land Rover Defender (all models, all model years) address two problems associated with the original hinges: for one they are more durable and have no play, additionally they greatly complicate bonnet theft. We have put emphasis on ease of fitting - this can be done by yourself. There are no holes that need drilling as only existing ones are used, all fixings, icluding the special safety-socket are supplied. The hinges are available in stainless steel or with black powder coating, please choose the desired finish.
Prices incl. VAT;
Replacement lever for trailer coupling KNB500070
Replacement lever for trailer coupling KNB500070 Replacement lever for trailer hitch KNB500070 for Land Rover Discovery 3/4 and Range Rover Sport.Delivery incl. lock
Prices incl. VAT;
Wind Deflector ClimAir Land Rover Defender to MY 2016, front
Wind Deflector ClimAir Land Rover Defender to MY 2016, Front Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of Defender does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows. There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Defender’s windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Defender, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in transparent, smoke grey or black and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included. Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately.
Prices incl. VAT;
7-pin E-Kit Universal, with AMC module, for Land Rover Defender up to and including MY98 and other vehicles
7-pin e-kit for Land Rover Defender up to and including MY98- also suitable for other vehicles. Suitable for vehicles without Check Control and data bus system. All parts required for installation are included in the scope of delivery. The installation does not need to be cleared by a specialist workshop! Including JAEGER AFC trailer control module for adjusting the flashing frequency.
Prices incl. VAT;
Mounting plate air inlet for CB antenna fixed mounting, for right-hand drive (RHD)
Plate for mounting a CB radio antenna on the air intake (RHD) This mounting plate ensures optimum mounting of a CB antenna on the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the right-hand (as seen from the driver's seat) ventilation grille / air intake. For left-hand drive vehicles, you can find the mounting plate here in our shop. As the Defender is made of aluminium, unfortunately no magnetic antenna base will hold. We have therefore designed a plate made of sheet steel with a suitable opening for the cable. This plate allows you to attach an antenna with a magnetic base, which you can easily remove if necessary. Scope of delivery: - Mounting plate - 1 m ground cable - Mounting material
Prices incl. VAT;
Mounting plate air inlet for CB antenna Land Rover Defender, for left-hand drive (LHD)
Defender CB antenna mount – air intake mount, magnetic or fixed This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet. Delivery: mounting plate 1 m ground cable mounting material
Prices incl. VAT;
Stainless Steel Radiator Cover for All Land Rover Defender
Stainless steel radiator cover for Land Rover Defender. Stainless steel radiator cover for vehicles with air conditioning, for Land Rover Defender 90/110/130, as a replacement for the corrosion-prone original part, in various designs and colours.The cover is optionally available with round and square openings, in stainless steel silver powder-coated or stainless steel black powder-coated.Please select the desired variant below.Another name for the radiator cover would be radiator guard or replacement cover for the radiator grille. Material Stainless steel silver powder-coated is colour-matched to our radiator grilles and headlight surrounds.
Prices incl. VAT;
Nakatanenga Spare Wheel Retaining Plate Stainless Steel
Nakatanenga RSpare wheel retaining plate stainless steel The stainless steel mounting plate is designed for DIY projects. It enables a Land Rover Defender wheel to be mounted on a flat surface, e.g. on a roof rack, a loading area or in the interior. The screw-in bolts/threaded rods have standard threads M16x2. The tire is fastened using the washers and nuts supplied. The screw-in bolts are 190 mm long. The size of the base plate is 200 mm x 200 mm. The plate alone, without accessories, is NOT suitable for mounting the spare wheel on the hood of the Defender! Please use the spare wheel holder for the TD5 linked below. media/pdf/74/df/0c/Merkblatt-Edelstahl-und-Rost.pdf
Prices incl. VAT;
Heavy Duty Mud Flaps for Land Rover Defender
Splash guard Heavy Duty Nakatanenga heavy duty mudflaps for Land Rover Defender 90/110/130, set containing 2 pieces. Our mudflaps are available for either front or rear axle fitting. Our mudflaps are made of HDPE (high-density polyethylene) and are very durable with less danger of ripping them off when reversing. Can be fitted to the front with the original mountings or our heavy duty mudflap mountings. At the rear the original mountings are used.
Content: 2 Piece (€22.50 / 1 Piece)
Prices incl. VAT;
Wind Deflector ClimAir Land Rover Defender to MY 2016, rear
Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of Jimny II does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows. There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Defender’s to MY 2016 windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Defender, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in transparent, smoke grey or black and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included. Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately.
Prices incl. VAT;
Windscreen Washer Nozzle for Land Rover Defender
Windscreen Washer Nozzle for Land Rover Defender The windscreen wipers of the Land Rover Defender 90/110/130 do not have an easy job with dried insect remains after long motorway journeys or mud after off-road use. This is where the windscreen wiper nozzles come to the rescue - they are attached to the arms of the wipers and ensure optimum cleaning results.
Prices incl. VAT;
Stainless Steel Grille Mounting Brackets for Defender Models with Air Conditioning
Stainless Steel Front A/C Panel Mounting Kit, for Land Rover Defender. Machine cut and CNC pressed for accuracy. Ready to bolt on. Set consists of: 4 x No8 x 16 mm A2 Pz2 bolts.2 x A4-70 No14 x 25 mm stainless steel Pz3 bolts4 x M5 A4 washers2 x M6 A4 washers2 x M8 A4-80 x 20 mm hex head screws2 x M8 A4 washers4 x No6 plastic lock nuts2 x No14 captive U-nuts2 x M8 A2/304 captive nuts Note - A4-80 is the equivalent of high strength mild steel 8.8 bolts
Prices incl. VAT;
Air intake cover for all Land Rover Defender models, set of 3, powder coated alloy
Air intake cover for all Land Rover Defender models (Tdi, Td5, Td4 2.4 and 2.2), set of 3, made of 2 mm aluminium to replace the plastic covers. Powder coated, comes with stainless steel fittings. Image similar
Prices incl. VAT;
Side Mirror for Land Rover Defender
Side mirror with arm for Land Rover Defender 90/110/130 Suitable for all model years, also Series III, if later hinges have been retrofitted. Fits driver and passenger side. Measures mirror: approx. 140x200 mmLength arm: approx. 140 mm
Prices incl. VAT;
Rear Step Land Rover Defender
Replacement rubber pad for the rear or side step of the Defender This cover protects your step so that you can enjoy it for a long time. The tread protector has a tire tread pattern and is suitable for either the rear or side step (please select under “Variant”). Suitable for all Defender models. You can find a matching step here: Rear step or side step
Prices incl. VAT;
Anti-theft nut set for winch and front bumper
Safety nut set - optionally M10, M8 or M6 1 Set of Security Nuts & WrenchesSecure your valuable accessories firmly to your Land Rover with these tamper proof nuts. Ideal for securing your winch and front bumper. Each set contains 4 nuts and 1 key.
Prices incl. VAT;
Sun Visor Mirror for Land Rover Defender
Sun visor mirror for Land Rover Defender The self-adhesive make-up mirror for the standard sun visor of the Land Rover Defender 90/110/130 can be mounted on two different places of the sun visor - see pictures.The mirror is available for either the left or right side of the vehicle and is sold individually. Supplied without sun visor.
Prices incl. VAT;
Stainless steel mounting kit for floor panels in footwell 2nd row of seats, for Land Rover Defender and Series
Stainless steel mounting set for floor panels in the footwell 2nd row of seats, for Land Rover Defender and Series. Fastening set includes the parts for driver and passenger side
Prices incl. VAT;