AUTOTERM air 2D (Planar 2D) parking heater, space-saving design (90° angle) Proven heating technology for campers, off-roaders, boats and more.   Formerly known as the Planar 2D, the Autoterm Air 2D is one of the most popular diesel parking heaters for campers, motorhomes, boats and expedition vehicles. Robust, reliable and safe - with extremely low fuel and power consumption - it is perfect for anyone who needs reliable heat on the road.   Manufactured in Latvia, it is completely “Made in Europe”.   High quality, high flexibility and perfect for DIY installation. Thanks to its compact design and various operating elements, the Autoterm Air 2D is suitable for almost any touring vehicle - from panel vans to expedition trucks. It can also be used on the water.   Thanks to the E-mark, it can be installed without registration - without TÜV approval and without loss of warranty if you install it yourself.  It is available for 12V for most campers and vans. The heater is available with two different hot air outlets for different space conditions and installation situations. 1. with straight outlet (can be found here): Please note that the warm air must be directed away from the heater in as straight a line as possible. The hot air pipe should ideally only make slight bends and must not make a 90° angle or similar bends directly behind the heater. Otherwise, heat will build up in the heater, causing it to switch off for safety reasons.   2. with 90° angle: Here, the hot air is discharged from the heater at a specially flow-optimized 90° angle. The outlet can be installed facing upwards or to the side. When installing this version in particular, it is important to realize straight piping from the heating outlet. The maximum pipe length must not exceed 3-4m.Important: Even if the heaters are completely identical: If you use the straight version of the warm air pipe to create an angled outlet as with the space-saving housing, your heater will overheat. Therefore, please plan your installation with regard to the routing of the hot air pipe before ordering so that you know immediately whether the straight or the angled outlet is more suitable for your installation! High-altitude kit as standard - ready for any adventure Whether in Nepal or the Andes: The Air 2D is equipped with an altitude kit that automatically adjusts the combustion to the change in air pressure. This means it runs reliably even at high altitudes. Nevertheless important: At very high altitudes, the amount of oxygen decreases - and with it the maximum output of the heater. As a rule of thumb: from an altitude of approx. 2000 m, the heater loses approx. 5 % output per 500 meters of altitude. And: the higher the altitude, the more sensitive the heater is to resistance in the air flow. Therefore, especially for operation at high altitudes, use the shortest and simplest possible air ducting and above all avoid angles and kinks! You can also simply remove the pipework completely for this time. Maintenance: Don't forget to burn off Like any diesel engine, a diesel parking heater needs to reach a certain temperature from time to time to get rid of deposits. Therefore, when you leave the mountains, let it run at full load for an hour. The same applies if it is permanently operated at a low level. This is comparable to a proper highway trip to maintain a diesel car. Control and operating elements A control panel is included with the heater (simply select the appropriate one above). You have the choice between these models:   Simple control panel Rotary control with power control, optional temperature mode with separate sensor.   Comfort Control Panel Modern OLED display, menu navigation finally also in German, timer function, voltage display, thermostat mode, multifunctional rotary control - everything you need. Scope of delivery: Autoterm Air 2D heater Control element  Extra quiet fuel pump incl. rubber holder Exhaust silencer (17 × 9 × 5 cm) Intake air hose with integrated silencer Cable harnesses for pump and heater Exhaust pipe (1 m metal), end piece + clamp Heat protection hose Fuel line (5.5 m), connector, tank intake pipe Assembly material (screws, nuts, clamps, heat-shrink tubing, cable ties) Operating instructions Attention: Sufficient length of fuel hose is included (simply cut into pieces if necessary).  Dimensions of the Air 2D Length: 33 cm Height: 12 cm + 2.5 cm for connections Depth: 12 cm Weight: 2.86 kg (without accessories)

Ignition Switch Clamp – Land Rover Defender (MY 1986–2007)   High-quality clamp for secure mounting of the ignition switch to the steering column. Fits all Defender models from 1986 to 2007, including TD4. A reliable replacement – built to withstand even tough off-road conditions.You can also find the steering column lock with three door lock cylinders or the matching shear bolt to match the clamp in the shop

Bonnet holder with style and function - for Mercedes-Benz G-Class The bonnet holder is one of the typical weak points of the Mercedes G-Class: Rust builds up quickly, making it difficult to open the bonnet and impairing its function in the long term. Our solution: high-quality bonnet brackets made of aluminium - a durable and well thought-out alternative.Thanks to their robust design and sophisticated features, rusting hinges are a thing of the past. The bonnet can be removed in a few simple steps and maintenance is easy thanks to the integrated grease nipple. A reinforced stainless steel pin with spiral groove ensures optimum distribution of the grease - for long-lasting smooth operation.The advantages at a glance:  Suitable for Mercedes-Benz G-Class models W460 / W461 / W463 up to model year 2018  Quick and easy removal of the bonnet  No more rusting or jamming  Made from high-strength, precision-milled aluminium  Corrosion and UV-resistant thanks to special coating precision-milled aluminium  Corrosion and UV-resistant thanks to special coating  Lubricatable via integrated grease nipple  Stainless steel plain bearing (replaceable)  Stainless steel bolts with spiral groove for perfect grease distribution  Plastic washers to prevent contact corrosion  Registered design  Can be painted and completely dismantled  100% Made in Bavaria Scope of delivery:  2 bonnet brackets  Including precisely fitting seals to protect the paintwork  All stainless steel screws required for installation included The matching door hinges, rear door hinges and window hinges for the Mercedes G are also available from us.