Automotive engineering
Tyre Repair Kit - 86 pieces
86-piece repair kit for tyres A must not only for road trip adventures and off-road expeditions: The 86-piece repair and spare parts kit for tubeless tyres is a perfect puncture repair kit for on the road and - with restrictions* - also a solid basis for tyre repairs of all kinds in your own garage. Punctures can be permanently sealed with the included tools, rubber strips, patches and vulcanising paste. Even valve damage is no longer a problem thanks to the extensive selection of spare parts. This is a cheap and quick alternative to a tyre service, especially for permanently stressed off-road tyres. *Due to §36 StVZO and the guideline for the repair of pneumatic tyres VkBl.2001, we would like to point out that permanent repairs may only be carried out by specialist companies after the dismantled tyre has been inspected and in accordance with the manufacturer's specifications.
Prices incl. VAT;
Spacers for stabilizer bar front axle, for Defender 90/110/130 from TDI upwards
Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair
Prices incl. VAT;
Tiger Seal adhesive and sealant
Tiger Seal adhesive and sealant U-POL is second to none when it comes to coatings, adhesives and fillers for automotive applications. Especially in the off-road sector, U-POL products like RAPTOR protective coating are the go-to solution of choice. Tiger Seal™ by U-POL is a one component ready-to-use sealant and adhesive for bonding, sealing and waterproofing of auto panels, trims or seams and the wide range of customizing projects for off-road, camping and expedition vehicles. Tiger Seal™ bonds firmly and permanently to most materials encountered in automotive, marine or domestic applications: steel, aluminium, galvanized metal, most plastics, fibre glass, glass, wood and many others. As a moisture curing polyurethane, Tiger Seal™ stays permanently flexible and doesn’t shrink after curing These unique PU features give Tiger Seal™ the edge over other sealant types, because car parts are constantly subject to considerable mechanical and thermal stresses. Whereas rigid sealants and adhesives become porous and brittle after time due to tension, vibration or thermal expansion/contraction issues, Tiger Seal™ bonds and seals permanently. Tiger Seal™ cartridges fit standard caulking guns and the product is very easy to apply. It doesn’t expand or foam and can be immediately painted over with most water or solvent based coatings. This is one of the main advantages over silicone-based products. Please refer to the application and safety instructions and always wear appropriate personal safety equipment. Tiger Seal™ contains harmful isocyanates, which may cause allergic reactions and respiratory problems when inhaled. Size: 310 mlColor: Black, white, grey
Content: 0.31 liters (€77.42 / 1 liters)
Prices incl. VAT;
Castor Correction Wedges 3 °
Correction wedges 3° for leaf spring axles - for optimising the axle geometry If you raise your car’s suspension or exchange your original shocks, most of the time axle or wheel geometry, i.e. caster or camber angles, will get out of alignment. To correct aberrations on axles with leaf springs, especially our 3-leaf parabolic springs for the 88” rear axle Land Rover Series II, IIA und III, we are now carrying these caster correction wedges. The wedges provide 3° correction and have a 13 mm pin opening.
Prices incl. VAT;
Seal Vent Flap Land Rover Series III and early Defender 90/110/130
High-quality seal for the ventilation flaps on Land Rover Series III and Land Rover Defender up to and including model year 2006 In contrast to the original parts made of foam rubber, this is a fully-fledged sealing material. The seals give way slightly over time. You can (re)glue them in with a PU adhesive. Scope of delivery: 1 piece
Prices incl. VAT;
K&N Air Filter Cleaning Kit
Set for cleaning and impregnating The K&N air filter cleaning and maintenance kit consists of one bottle of K&N air filter cleaner and a bottle of filter oil to re-apply filter oil. In normal conditions cleaning should be done every 80.000km, in heavy conditions (industrial use, desert raids, rallye driving) cleaning intervals should be shortened and visual checks should be made frequently. Instructions: Spray K&N filter cleaner on cotton filter onto both sides and allow to soak for 10 minutes to loosen the dirt. Make sure cleaner does not dry. Rinse off cotton filter with cool no-pressure water from the clean side out to the dirty side until all traces of cleaner and dirt have been washed out. You might have to repeat the previous and this step. Shake water off and leave to dry naturally in the air. Don't oil filter before it is completely dry. Spray surface of each filter pleat with K&N filter oil from a distance of about 8cm (3"). Leave oil to wick for about 20 minutes and re-oil any light areas until there is an even red colour on all areas.
Prices incl. VAT;
▷ Repair kit for Defender tailgate hinges - available here!
Repair kit for tailgate hinges screwed version1 set, see pictureOnly suitable for hinges with screwed bolts.Does not fit hinges with pressed bolts.
Prices incl. VAT;
Hub Cap for CW Rims
The Perfect Cover: Hub Cap for Your CW Wheels Do you pay attention to every detail on your off-roader? Then the matching hub cap for your CW wheels is an absolute must! This cap is not only a visual highlight but also reliably protects the wheel hub from dirt, dust, and moisture. Perfect Fit and Stylish Specially designed for CW wheels, this hub cap fits like a glove and seamlessly integrates into the design of your wheels. It completes the overall look of your vehicle and ensures a clean, professional appearance, whether you're stuck in the deepest mud or conquering the road. Protection That Pays Off The wheel hub is an important part of your chassis. With this hub cap, you effectively protect it from external influences that could promote corrosion or wear. A small investment that contributes to the longevity of your components. Easy Installation Installation is child's play and done in no time. So you can quickly and easily ensure optimal protection and the perfect look for your wheels. Add the finishing touch and protect your wheel hubs at the same time – with the custom-fit hub cap for your CW wheels from Nakatanenga! Available for CW rims in sizes 7x15", 7x16" , 8x15" and 8x16", colors: silver, with CW Logo
Prices incl. VAT;
Adaptor for cyclonic air filter
Adapter kit for cyclone filter ZYKL N - suitable for snorkels with 80-85 mm diameter With this adapter kit, the cyclone pre-filter ZYKL N can be quickly and reliably fitted to snorkels with an outer diameter of 80-85 mm. The ideal solution for anyone who wants to efficiently protect their air intake tract from dust, sand and dirt - especially in off-road or desert use. With the adapter kit, you can optimally upgrade your snorkel and improve the filter performance of your air intake system - for longer maintenance intervals and better performance in demanding conditions.
Prices incl. VAT;
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.
Prices incl. VAT;
RING LED Bulb - Filament style, RW2073
Ring LED bulbs type R207 R5W These bulbs have a long life and are more resistant than conventional bulbs. Technical details:12 V60 lumens3,000K (white) Advantages: vibration-proof durable more resistant was developed to replace a conventional car lamp Delivered is a set consisting of 2 lamps. IMPORTANT NOTE:Not approved for the STVO!
Prices incl. VAT;
LED light bulb, filament style, RW2336
Ring LED Bulbs Type RW2336FSLED 233 T4W These bulbs have a long life and are more resistant than conventional bulbs.Compared to halogen, these LED lamps have a much lower power consumption. Technical details:12 V40 lumens6,000K (white)0.5 watts Advantages: vibration-proof durable more resistant was developed to replace a conventional car lamp Delivered is a set consisting of 2 lamps. IMPORTANT NOTE:Not approved for the STVO!
Prices incl. VAT;
Washer pump including grommet
Washer pump including grommet Suitable for Land Rover Defender MY 87-98 without air conditioning
Prices incl. VAT;
Plastic expanding rivets for door panels and mudguard extensions - Defender
Plastic expanding rivets, black Plastic dowels for door panels and mudguard extensions for Land Rover Defender
Prices incl. VAT;
Connector / mating connector for Land Rover Defender switch OEM Style
Connector / mating connector for Land Rover Defender switch OEM Style Suitable connector / mating connector for switch YUG000540LNF / YUF500150LNF / YUG102440 or our OEM style switches Scope of delivery: connector incl. contacts As spare part for our switches: Switches for Land Rover Defender & Discovery Switch with bezel for Land Rover Defender & Discovery Land Rover Defender OEM switch auxiliary headlights
Prices incl. VAT;
Gasket Set for Fuel Cooler FCTD5AT
Repair kit for fuel cooler The repair kit for the fuel cooler consists of 4 rubber rings which ensure a secure seal. Suitable for the fuel cooler PIB000060 (see illustration) of the Defender Td5 and the Discovery II.
Prices incl. VAT;
Mounting tool for spikes with Ø 9mm
Mounting tool for studs with Ø 9mm Bit (tool) for mounting spikes with a diameter of 9 mm on winter wheels.Easily compatible with a cordless screwdriver due to the hexagonal profile of the screw head.Note: Tyre studs are prohibited in GermanyAssembly steps:1. position the head of the corresponding studs with the mounting tool2. place the thread of the stud on the tyre surface3. press down & screw in with a cordless screwdriver while turning slowly4. screw in the spike only until the head touches the tyre surface5. if the spike is unintentionally screwed in too far, leave it as it is - do not unscrew it to try to get it into the correct position6. check the spikes every 1000km & correct if necessary7. with the aid of the fitting tool and a cordless screwdriver, the studs can be gripped & removed
Prices incl. VAT;
Power screwdriver socket 1/2 inch for New Defender wheel nuts steel rim
Power screwdriver bit 1/2 inch with plastic sheath, to protect the rim Features: Design: hexagonal (HEX)Features: with protective sleeveDrive size: 1/2 inch (12.5 mm)Wrench size: 22 mmTotal length: 85-86 mmMax. Torque: 961 Nm (97 kg/m) Material: Chrome molybdenum steel (Cr-Mo), forged and hardened Suitable for impact wrench and torque wrench !
Prices incl. VAT;
Defender fuel filter clasp fixing kit
Fuel filter mounting set - Defender Practical mounting set for secure mounting of the fuel filter on the Land Rover Defender. Ideal as a replacement for defective brackets or for conversions. Robust quality, perfect fit for various Defender models.
Prices incl. VAT;
Replacement bracket and catch for canister holder rear door
Replacement bracket and lock for rear door canister holder The locking bolt can be secured by means of a padlock and is made of high-quality stainless steel.
Prices incl. VAT;
▷ LOF Clutches Alignment Tool for TDI/TD5/TD4
LOF Clutches Clutch Alignment Tool This tool enables you to correctly align clutch discs in most Land Rover models. The alignment tool is CNC machined from black Nylon and will suit TDI, TDCI Puma, TD5, 2.25 and all 4-cylinder engines on Series I - III.
Prices incl. VAT;
Inspection set for TREKFINDER steering damper - with pin or eye
Damper repair kit Inspection set for TREKFINDER steering damper - eye Delivery: 1 piece rubber bush1 piece of metal sleeve -------------------------------------------------- --------------------------------- Inspection set for TREKFINDER steering damper - pin Delivery: 1 piece hex nut1 piece metal plate outside2 pieces of metal plate inside2 pieces of rubber buffer
Prices incl. VAT;
Spring Spacer Ring - Spacer - Lifting - Levelling TREKFINDER
Spring Spacer Ring/ Trim Packer/ Lifting Ring TREKFINDER for SUZUKI Jimny I & II + 10 Millimeter in colour red - for levelling at the front or/and rear axle. Suitable for all Jimny models at the front and rear axle: Jimny II type GJ & HJ as of MY 2018 Jimny I type FJ until MY 2018 for the front axle spring for the rear axle spring 10 millimetre height adjustment SCOPE OF DELIVERY: 1 piece TREKFINDER polyurethane spring distance ring with marking TREKFINDER logo + FDR10 in colour red. NOTE: The spacer rings are listed in the TÜV® parts certificate for our TREKFINDER Jimny II complete suspension 40 mm and Jimny I suspension 55 mm and can therefore be optionally installed 1x per spring.A general TÜV® parts certificate is not available or is NOT included in the scope of delivery. MOUNTING INSTRUCTIONS: The installation is carried out between the upper end of the spring and the spring plate. Make sure that the brake line is long enough Make sure that the shock absorber is long enough. Check the headlight setting. The permissible height of the coupling ball must be observed. If there is a load-dependent headlight adjustment, e.g. for LED lights, this must be checked and, if necessary, adjusted or changed/extended. If a new measurement or calibration of the sensors of the driver assistance system is necessary due to the changed vehicle geometry of the vehicle, this must be carried out according to the specifications of the vehicle manufacturer. For vehicles with load-dependent brake pressure regulator, this must be readjusted to the empty level (according to the vehicle manufacturer's specifications). After retrofitting, the axle geometry of the vehicle must be measured and, if necessary, corrected according to the vehicle manufacturer's specifications.
Prices incl. VAT;
AGR/EGR-Closure Plate Land Rover Defender Td5/Tdi
AGR/EGR- closure plate for either the Td5- (- MY02) or the Tdi-engine, to eliminate exhaust gas recirculation. Comes with the necessary bolts. Motorsportequipment, not certified for road use.
Prices incl. VAT;
LOF Clutches Alignment Tool for Land Rover V8
LOF Clutches Centring Tool This clutch centring pin from LOF Clutches is used to correctly align clutch discs on all ROVER V8 applications with 549991 spigot bush. Made from CNC machined plastic, the clutch arbor fits vehicles with the following engine options: SKU: V8-CAT Categories: Land Rover Series Clutches, Clutch Parts, Land Rover Defender Clutches, Land Rover Discovery Clutches, Range Rover Clutches Tags: 1.6L/2.0L Clutches, 2.25 (Petrol/Diesel) Clutches, 2.8 tgv Clutches, 200/300 Tdi Clutches, Td5 Clutches, TDCI (2.4/2.2L) Clutches
Prices incl. VAT;
Set of 4 Defender hub caps
Plastic hub cap set of 4 WITHOUT LR-LOGO - Suitable for Discovery 1 1989-1998, all Defender and Range Rover Classic Scope of delivery: 4 pieces
Prices incl. VAT;
Axle stop rubber for Land Rover Defender
Axle stop rubber for Land Rover Defender up to BJ 2016 Specification: Category: Axles and Suspension Engines: All Fuel: Diesel, Petrol Premium range: ANR4188G: Yes / ANR4189: No Transmission: Manual, Automatic Specification NAS - North American Specification, NOT-NAS - Non North American Specification Quality rating: 100 Drive Type: Drive Wheel 2WD - Two Wheel Drive, 4WD - Four Wheel Drive Fits DEFENDER 1986 - 2006, DEFENDER 2007 AFTER, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC.
Prices incl. VAT;
Ballistol Rim Cleaner, Pump Spray
Ballistol Rim Cleaner is an extremely powerful gel cleaner with an active indicator This means that a colour change occurs with increasing effective power (the cleaner turns purple). Removes stubborn dirt such as brake abrasion, oil and rubber residues highly effectively and automatically. Also suitable for TPMS (tyre pressure monitoring system). cleaning status is indicated by colour change foams up when sprayed removes light rust film tested material compatibility for all rims (steel, aluminium high-gloss, multi-piece, matt) neutral towards rubber and painted surfaces odour-reduced, acid-free and biodegradable without nanotechnology Note: Do not use on warm rims or in the blazing sun. Rinse thoroughly, do not allow to dry. Protect from frost. Check material compatibility on an inconspicuous area before use. Caution:Harmful if swallowed. May cause allergic skin reactions. Causes severe eye irritation. If medical advice is needed, have packaging or label at hand. Keep out of the reach of children. Wear protective gloves / protective clothing / eye protection / face protection. In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. Dispose of contents / container for recycling.
Content: 0.75 liters (€17.33 / 1 liters)
Prices incl. VAT;
1/2" Nut for wheel nuts, 27mm
1/2" Nut for wheel nuts, 27mm Nut with SW 27, suitable for our NA ZURM wheel nuts, for 1/2" drive.
Prices incl. VAT;
Silencer / Spacer f. height compensation (Rover axle)
Silencer / spacer for height compensation (rover axis) The article can be used on the front axle on the 90/110/130 and on the rear axle on the 90. Optimal possibility for level adjustment / the raising is 10 millimetersThe rubberized surface of the ring reduces the transmission of vibration noisesThe washer is placed between the spring end and the spring plate, a maximum of one washer per spring end is possible, i.e. H. a maximum of two washers per spring, so a maximum height of 20 mm per spring is possible. Price per piece
Prices incl. VAT;
Set (4 pcs) plastic rivets grille + corner bumper Defender with AC AB4A670710
Plastic Rivet Set for Defender Grille and Bumper These rivets are used on all models of the Land Rover Defedner from 1987. The plastic rivets are suitable as end caps for Land Rover Defender bumpers or e.g. also as a clip on the grille and on some interior panels. Fits a 7 mm holeHead diameter: 18 mmTotal wavelength 27 mm
Prices incl. VAT;
Screw retaining bracket injection nozzle Defender TD4 2.2 or TD4 2.4
Mounting screw suitable for mounting bracket injection nozzle - Defender TD4 2.2 and 2.4 here in the store
Prices incl. VAT;