Lighting
Additional interior light for Land Rover NEW DEFENDER from BJ 2020
Additional Interior Light for Land Rover NEW DEFENDER The new Defender is being marketed as a true workhorse, but – as always – there’s room for improvement when it comes to the practicalities of working with your L663 on a day-to-day basis. One such aspect is definitely the lighting for the load space in the back. The standard set-up is somewhat sparse but most of all it lacks proper roof lights. This is especially problematic since the cargo area is often filled up or modified by installed racks, boxes and the like. Our LED light bar solves this problem with more than sufficient 396 Lumens light intensity. The lightbar is easily installed on the trim above the cargo door and illuminates the entire load space – helping you to quickly find tools and equipment and ensuring safe working conditions day or night. Mounting the roughly 36 cm long and 2 cm wide LED lightbar is really easy. Simply click the two fastening clips into the edge of the upper door trim. The clips’ custom-shape will hold the lightbar firmly in position. Connecting the device to the Defender’s wiring is just as quick by simply pushing the LED bar’s wire behind the trim and pulling it along the D-pillar towards the standard lamp housing by the fuse box. In most cases, you won’t even have to remove the trim panels. Lastly, the LED bar’s connector is simply plugged into the standard lamp’s socket. The bar is activated and deactivated as required by its own touch button. Dimensions: 362mm x 25 mm x 11mm
Prices incl. VAT;
LED Indicator front / rear for Land Rover Defender until MY2016, smoke grey
LED signal light Land Rover Defender up to MY2016: Indicator rear/front, smoke grey This high-quality LED indicator is suitable for the Land Rover Defender and is available as a front and rear indicator. It has an E-mark, a diameter of 73 mm and impresses with its unique smoky grey colour. Suitable for Land Rover Defender up to MY2016 For these indicators you need our four-pole indicator relay, which also offers the feature of being able to set the indicator speed yourself. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED signal lights Land Rover Defender until MY2016: turn signal, front, yellow
LED signal lights Land Rover Defender up to MY2016: Indicators, front, amber Front LED indicators for Land Rover Defender in yellow, single. With E-mark. Suitable for Land Rover Defender up to MY2016. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round indicator lights. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender. For these indicators you need our four-pole indicator relay, which also offers the feature of being able to set the indicator speed yourself. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Osram ONYX Copilot
Precisely illuminated vehicle interior The ONYX COPILOT LED reading light blends seamlessly into any vehicle interior with its sleek and dynamic design. It is very flexible and therefore suitable for the illumination of different areas in the vehicle interior. The neck of the lamp has a matt black silicone surface and can be individually aligned. The LED life of the ONYX COPILOT luminaire is extremely long with up to 20,000 operating hours. The lamp can be switched on and off with a switch so that it can always remain connected. OSRAM offers a warranty of 2 years for this stylish product.
Prices incl. VAT;
LED signal lights Land Rover Defender until MY2016: tail light / brake light, white
LED signal lights Land Rover Defender up to MY2016: tail light / brake light, white LED brake light for Land Rover Defender in white, single.With E-mark.Suitable for Land Rover Defender up to MY2016If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round lights. As a rule, the original drill holes can then be used.Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover DefenderPlease note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights.Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED Position light for Land Rover Defender, smoke grey
Reliable LED parking light for Land Rover Defender - durable & certified This high-quality LED position light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the position light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Licence plate light with camera for Land Rover Defender until 2016
Licence plate light with integrated reversing camera Licence plate light with integrated reversing camera. They replace the unsightly original plastic part and offer more than just an additional eye-catcher on the vehicle. The bright LED lighting ideally illuminates the number plate in all weather conditions and ensures a long service life.The integrated reversing camera provides the best view to the rear and thus prevents damage when reversing. So you have a huge relief AND a cool gimmmik with minimal effort.Product details: made of high-strength aluminium corrosion & UV resistant coating camera resolution 480-520 TV camera with day and night vision function Camera is tiltable Camera viewing angle is 120° - 140° horizontal angle Camera is IP67 certified (dust and waterproof) Scope of delivery: LED number plate light Rear view camera Seal and fit kit 6m long chinch video cable 1,5m long 12V power cable The original holes for the number plate lighting are used. On some models, however, the lighting may protrude slightly, in which case 2 additional holes could be placed so that the lighting rests on top.Please note that NO monitor is included in the scope of delivery!All monitors with a cinch connection can be used.
Prices incl. VAT;
Scenelight LED Environment Light black / white
This flat and bright Scenelight LED ambient lighting E-approval mark is perfect for universal workings. Technical specifications:Energy efficiency: A+Supply voltage: 12-28 VPower: optionally 4,5 Watt (with 550 Lumen) or 9,0 Watt (with 1.100 Lumen)LEDs: 9x 0,5 Watt (=4.5 W) or 18x 0.5 Watt (=9 W)Lightcolour: warm white 3.000 KHousing Color: optionally black or whiteProtection: IP68E-labeling: 10R-05 0097Footprint: 18x30 mmLength: 231 mm (at 4.5 W) or 480 mm (at 9 W)Weight: 110 g (at 4.5 W) or 175 (at 9 W)
Prices incl. VAT;
Nakatanenga side indicator protection - Typ Q - pair
Lamp protection grille for mudguard indicators The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-
Prices incl. VAT;
LED Signal Lights Land Rover Defender: Rear Fog Light 95mm, red. Ready to plug in!
LED rear fog light for Land Rover Defender, single With E-mark.Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lamps. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Vision-X Dura Mini LED Worklight
Compact LED worklight Vision-X Dura Mini With 60° illumination, draws only 1.0 A with an output of 2,000 lumens (raw), waterproof to IP69k standard. Technical details:components: 4 LED with 3 W eachpower input: 12 W / 1.0 Aoperating voltage: 9-32 Villumination: 60° (flood)flux density (raw): 2000 lumensflux density (actual): 950 lumenslight output: 1 lux in 60 metres distancewaterproof: IP69k standarddimensions: (width x height x depth): 70x92x50 mmconnector: Deutsch plug The Dura Mini compact worklight is ideal for consticted mouting spaces and can be fitted to rear bumpers, below roof racks or side body panels. Its 60° light cone illuminates your working environment very well, while the aluminium die casting housing and the hightest IP-class waterproof standard guarantee long-lasting, troublefree use under the toughest conditions. Nakatanenga roof rail holder NOT included - please order separately!
Prices incl. VAT;
NOLDEN Generation 2 High Performance 7" Bi-LED Headlight
The new generation of the well-known 7" Bi-LED headlights from Nolden Innovative 7" LED main headlight Generation 2 with proven reflector technology combines low- and hight-beam as well as (optional) position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price for one lamp! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black (Stealth Edition)! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1880 lm / 2400 lm lumens measured: 1550 lm / 1700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. If your vehicle has a CANBUS system or a lamp failure check, please contact us before purchase. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.
Prices incl. VAT;
LED Tail Light / Brake Light for Land Rover Defender, smoke grey
LED tail light for Land Rover Defender - discreet smoke look & tested This high-quality LED tail light / brake light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the tail light / brake light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Spiral cable for working / reversing lights
Spiral cable for work / reversing lights Spiral cable for almost every working & reversing light that can be connected quickly and easily to the cigarette lighter.
Prices incl. VAT;
LED Tail Light / Brake Light for Land Rover Defender until MY2016, 95mm, smoke grey. Ready to plug in!
LED Tail Light / Brake Light for Land Rover Defender until MY2016, smoke grey This high-quality LED tail light / brake light is for the Land Rover Defender. It has an E-mark, a diameter of 73mm and impresses with the unique smoke grey color. Suitable for Land Rover Defender until MY2016Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, you need a 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can be used. Please note that you can also purchase the tail light / brake light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note:The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires.Use only a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED signal lamps for Land Rover Defender, different sets
Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains: 1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Nakatanenga protective grille type Q Bundle / Set
Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light
Prices incl. VAT;
Nakatanenga Lamp Bracket for Land Rover Defender, without lamps
Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted hanging down) - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting. When the lamps are mounted upright, the vehicle height is minimally increased. The one-piece bracket is made entirely of stainless steel, glass bead blasted and powder coated. It has four mounting eyes for individual headlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the headlamp connection cables (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details. For a neat installation, we recommend the Aquasignal cable grommet for the roof (so the light bar also remains easily removable) as well as our power distributor with fuse holder. Please also note our bundles with price advantage: Nakatanenga Lightbar with 4 Vision-X LED Worklights UMX Nakatanenga lamp hanger with 2 Vision-X LED spotlights LPX Nakatanenga lamp hanger with 4 Vision-X LED spotlights Cannon Not combinable with the original Land Rover lamps and also not with Mantec lamps! Please select the desired colour of the lamp hanger. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:
Prices incl. VAT;
LED rear fog lamp for Land Rover Defender until MY2016, 95mm, clear. Ready to plug in!
LED rear fog lamp for Land Rover Defender, single 95 mm diameter waterproof to IP67 With E-mark and mounting material until MY2016 Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp to mount the new round rear fog lamp. As a rule, the original drill holes can then be used.
Prices incl. VAT;
LED Tail Light / Brake Light for Land Rover Defender, 95mm, smoke grey. Ready to plug in!
LED signal light Land Rover Defender: rear fog light, smoke gray High-quality LED rear fog light for the Land Rover Defender in visually appealing smoke gray / smoke. The signal light has an E-mark and a diameter of 95 mm. Including SuperSeal connector 2-pin. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lights. As a rule, the original drill holes can then be used. Please note that you can also purchase this rear fog light with other signal lights in a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Nakatanenga LED Interior Light Hunter, Universal (not Defender), warm white
Nakatanenga LED interior light Hunter, universal (not Defender), warm white In response to enquiries about how our Nakatanenga interior light for the Land Rover Defender can also be used in other vehicles, we have put together this set. It contains everything you need to use the light in cars, 4x4s, motorhomes etc. that do not have the original Land Rover interior light. Technical data: Light colour (warm white): 4,500 KelvinWavelength (red light): 625 nmVehicle voltage: 12 V (not suitable for 24 V vehicles!)Voltage range: 11-18 VPower consumption (at 12.8 V): 0.15 A (white light)Power consumption (at 12.8 V): 0.05 A (red light)
Prices incl. VAT;
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.
Prices incl. VAT;
LED signal light reversing light suitable for Series and Defender MY1987-2002
LED - Reversing light Product information: LED-LIGHT PRC7263LED Reversing lightVehicle: Defender - 1987 - 2006 Series III
Prices incl. VAT;
Vision-X Overland 3 Reversing Light
Vision-X Overland 3 Reversing Light The Vision X Value Line LED series offers excellent light output in a robust housing with a functional design for versatile applications.This headlamp is tested and approved as a reversing light.The brand new Vision X Overland light is the perfect solution for lighting large areas.With its low-profile design, the Vision X Overland light mounts perfectly under most rack systems and is perfect for illuminating wide-ranging areas with its 60/40 floodlight optics. With a power consumption of only 15 watts and a light output of 1,140 lumens, the headlamp can be used without having to start the vehicle.The waterproof and dustproof ventilated housing prevents moisture build-up and makes these lamps the perfect off-road lighting.Technical data: LEDs: 3 x 5 watts Housing material: aluminium Light colour temperature: 6000 Kelvin EMC/EMI approval: CISPR25 class 3 Dimensions: 119/72/51mm Weight: 0,5 kg Voltage: 9-32V DC Current: 0.65A@24V DC - 1.25A@12V DC Vibration class: 21 grams Lens material: polycarbonate Certifications: CE, RoHS, IEC 62471, ECE R23 (E-MARK) Lumen (raw): 1.140 lm Lumen (effective): 797 lm Beam pattern: 60° / 40° mixed Thanks to the single-bolt bracket, the LED headlamp can be easily adjusted and mounted. High-quality housing components give the VL series the robustness to withstand daily demands and harsh conditions.Built-in reverse polarity protection helps prevent accidental damage due to incorrect installation.
Prices incl. VAT;
Land Rover Headlight Protectors
Land Rover Headlight Protectors Protection for the main headlights of the Land Rover Defender, made of Makrolon, original Land Rover part, without E-mark, delivery in pairs.
Prices incl. VAT;
OSRAM LEDriving® Lightbar FX250-SP/ FX250-CB GEN 2, auxiliary headlamp
Increased brightness for long-distance and close-range illumination Especially when driving on country roads and unpaved paths, increased visibility can be an important safety factor. The LEDriving® Functional Series FX Gen 2 portfolio provides additional close-range and far-field illumination on dark roads. Even in poor visibility conditions or at dusk, the high-performance LEDs achieve a range of up to 635 metres and daylight conditions with a colour temperature of 6000 Kelvin. The auxiliary headlamps of the FX series impress with a special reflector design and not only provide a modern and appealing look, but also reduce glare for more visibility in road traffic. They can be used both as additional LED headlights and as powerful worklights. Both versions of the lights are fully ECE-compliant and therefore suitable for use in road traffic. In addition, OSRAM has developed a special mounting kit that is compatible with all auxiliary headlamps of the FX Gen 2 series for individual mounting. Versatile in use, they defy numerous environmental influences and are particularly light and at the same time robust and resistant thanks to high-quality materials such as the aluminium housing and the stable polycarbonate lens. Complete reverse polarity protection prevents damage due to overvoltage and contributes to a longer service life. The FX series auxiliary lights have been tested and validated in a DIN-certified environmental simulation laboratory for extreme external influences with regard to water, dust, shock, heat, cold and permanent vibration in accordance with the highest IP & IK protection classes IP6K8 & IP6K9K. Their variability gives the FX series a flexible range of applications. They can be fitted to cars, trucks, agricultural machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and quads. OSRAM provides a 5-year warranty on these products. Product details: OSRAM LEDriving® auxiliary headlamp Lightbar FX250-SP GEN 2 | LEDDL129-SP Features: SPOT BEAM = For particularly focussed high beam distribution Light beam of 360m Luminous flux: 2,120lm, rated power: 27W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection ECE R10, R149, ECE (Ref. 30) certification. Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 10 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1) OSRAM LEDriving® auxiliary headlamp Lightbar FX250-CB GEN 2 | LEDDL130-CB Features: COMBO BEAM = Combined beam pattern for both far-field and near-field illumination Light beam of 320m Luminous flux: 2,520lm, rated power: 37W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection ECE R10, R149, ECE (Ref. 25) certification. Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 10 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1) Product description: Outstanding illumination, performance, quality, form, durability and functionality. Maximum optical efficiency, effectiveness and homogeneous light distribution Coverage of far-field illumination Perfectly matched to individual requirements and needs for multivariant use Special reflector design for an attractive and modern appearance and reduced glare Robust and resistant - for a long service life Increased safety off-road and on-road ECE-compliant and approved for use in road traffic Fields of application: Cars, trucks, 4x4s, ATVs, agricultural vehicles, commercial vehicles, construction vehicles, quads, caravans, etc.1) Exact conditions at: www.osram.de/am-garantieNote: Single mount - no installation in pairs necessary, as two certified light sources are used.
Prices incl. VAT;
NOLDEN 7" Bi-LED main headlight kit Generation 2 for Mercedes G
NOLDEN 7" Bi-LED main headlight kit Generation 2 for Mercedes G NOLDEN 7" Bi-LED main headlight kit Generation 2 with two headlamps with low-/high-beam and adaptor for Mercedes G. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Mercedes G Wagon. Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, various Toyota, Jeep Wrangler JK/TJ/CJ, etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black (Stealth Edition)! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1880 lm / 2400 lm lumens measured: 1550 lm / 1700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version. You get one complete set for your vehicle. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.
Prices incl. VAT;
Protective Grille for Nolden Worklights
Protective grille for Nolden worklights When investing in high quality gear, of course, you want it to last as long as possible. In order for your Worklights to be protected in the best way possible this protective grille is going to ensure the durability of your Nolde Worklights. Material: stainless steel, black powder-coatedPlease note: for the reversing spotlight with 500 lumens, you also need these retaining brackets.
Prices incl. VAT;
90 LED camping tent light with flexible strip, 294 lumens, length: 90cm
Flexible LED light strip with dual-voltage operation - 90 cm, 294 lumens This versatile LED light strip offers powerful illumination with 90 LEDs and a light output of 294 lumens - ideal for use in vehicles, motorhomes, when camping or at home.Operation is possible either via 12 V (mains plug) or 230 V (mains adapter) - both connection options are included in the scope of delivery.Thanks to the flexible 90 cm length and a 2 metre cable, the light strip can be positioned individually. Clips, adhesive pads and adhesive tape are also included for easy and secure installation.
Prices incl. VAT;
LED Signal Light Rear Fog Light suitable for Series and Defender MY1987-2002
LED - rear fog light Product information: LED-LIGHT Code: PRC7254LED Rear fog lightVehicles: Defender - 1987 - 2002 Series III
Prices incl. VAT;
NOLDEN 7" Bi-LED main headlights for Land Rover Defender
Robust main headlamp with integrated low beam, high beam & position light - stainless steel mounting included NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price for one lamp! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1.880 lm / 2.400 lm lumens measured: 1.550 lm / 1.700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.
Prices incl. VAT;
OSRAM LEDriving® WL VX80-WD, worklight
Powerful LED worklights VALUE series VX With the OSRAM LEDriving® Value Series VX worklight portfolio, you can achieve impressive illumination on dark field and forest paths as well as off-road. The worklights combine affordability with exceptional performance, quality and functionality, providing users with impressive visibility in the off-road workplace. Available in a range of shapes including Cube, Round and Lightbar, they impress with luminous flux from 550lm up to 3000lm, significantly increasing workplace safety for you and others. Even in low light and limited visibility, the task lights can create daylight-like conditions with up to 6000 Kelvin. Versatile in use, they defy numerous environmental influences and are particularly light and at the same time robust and resistant thanks to high-quality materials such as the aluminium housing and the stable polycarbonate lens. The LEDriving® Value Series VX worklights have been tested and validated in a DIN-certified environmental simulation laboratory for extreme external influences with regard to water, dust, shocks, heat, cold and permanent vibration in accordance with the highest IP & IK protection classes IP6K8 & IP6K9K. The Value Series is an effective and efficient addition to your vehicle. They can be fitted to trucks, agricultural machinery, commercial vehicles, construction vehicles and off-road vehicles. Product details: Features: OSRAM LEDriving® worklight Round WL VX80-WD | LEDWL104-WD WIDE BEAM = beam pattern for wide-area and broad light distribution Light beam up to 43 m Luminous flux: 1,350lm Cold white light with 6000K Rated power: 12W, beam angle (horizontal/vertical): 39°/40 For 12V & 24V vehicles 4 powerful OSRAM LEDs Cable length 450mm Over- and undervoltage protection CISPR25 Class 3, ECE R10, approved reversing light ECE R148 Highest protection classes: IP6K8 & IP6K9K Compact and robust - shatterproof polycarbonate lens and die-cast aluminium housing Standard brackets included Features: OSRAM LEDriving® worklight Cube WL VX80-WD | LEDWL105-WD WIDE BEAM = beam pattern for wide-area and broad light distribution Light beam up to 47 m Luminous flux: 1,350lm Cold white light with 6000K Rated power: 12W, beam angle (horizontal/vertical): 36°/37 For 12V & 24V vehicles 4 powerful OSRAM LEDs Cable length 450mm Over- and undervoltage protection CISPR25 Class 3, ECE R10, approved reversing light ECE R148 Highest protection classes: IP6K8 & IP6K9K Compact and robust - shatterproof polycarbonate lens and die-cast aluminium housing Standard brackets included Product description: Combines affordability with excellent illumination, performance, quality, form, durability and functionality. Perfectly matched to individual requirements and needs for multivariate use Improved visibility and visibility in low light conditions Robust and resistant - specially developed for tough everyday workStrong performance and long service life Increased safety through better illumination at work for you and others 2 years OSRAM guarantee 1) Applications:Trucks, vans, agricultural vehicles, commercial vehicles, construction vehicles, off-road vehicles, etc. 1) Exact conditions: www.osram.de/am-garantie
Prices incl. VAT;
Lights: which system is the right one?
Especially for motorists, good main beams and the resulting visibility is an important safety aspect. While standard halogen headlights have a maximum range of about 140 metres, Xenon and LED lamps can reach up to 240 metres. Those who skimp on the lighting of their vehicle not only has to accept inferior output and longevity, but also insufficient lighting of the road ahead. This might be in compliance with the legal requirements, but especially driving off the beaten has demands much more from a light system. Technology has dramatically advanced in the past years, and it's really time for an upgrade from traditional main beams to modern, durable lighting technology!
The classic one: halogen
While cost-efficient halogen lights are still widely used in vehicle lighting due to cost reduction, the light output is not sufficient for many drivers. The light as a typical yellow tone to it and an irregular, diffuse light pattern. In comparison to LED lights, halogen headlights seem outdated. They are also susceptible to shocks and vibration, which makes them less than perfect for off-road vehicles, often also equipped with a rough diesel engine.
The glaring one: Xenon
In contrast to this there are the brighter and more energy efficient Xenon lights. These gas-discharge lamps are produced to simulate natural daylight as closely as possible. The longevity of Xenon lights is about four times that of halogen lights. However, I high-tech electronic control unit is needed. Additionally, self-cleaning systems and automatic levelling units are compulsory for all vehicles equipped with Xenon lights. High maintenance costs and a higher susceptibility - especially in off-road use - mean that Xenon lights are an expensive alternative that has today largely been replaced by modern LED lights.
The efficient one: LED lights
Today they are not only fitted to indicators, daylight driving lights and rear lights, but also as main beam units. Modern LED lights offer high light output, a light spectrum close to daylight, space-saving size and highly efficient energy consumption as well as an abundance of design variants. Apart from a superior longevity compared to all other light systems, LED lights also offer the best vibration resistance by far. Even long drives on washboard roads can do no harm to these modern and durable lights.
LED lighting systems consist of one or more LED diodes which turn electrical current into light at very low heat emission. In a headlight an optical lens is placed in front of the LED which focusses the beam, lighting the road ahead very evenly and at an optimum.
LED lights for off-road vehicles as an energy-saving aftermarket replacement
Apart from all the above-mentioned advantages of LED lights, they also don't need the self-cleaning systems of the Xenon lights. Therefore, they can easily be installed even in older vehicles. An active beam levelling unit is also not necessary. All LED headlights sold by us are E-marked for legal use on public roads. Thus, there is nothing that prevents the simple and cost-effective replacement of your old headlights. In addition to main headlights we also supply optional spotlights, work lights - also in form of the popular lights bars - rear light and signal lights, as well as indicator lights for all well-established off-road vehicles.