Lighting

NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price for one lamp! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights.  Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1.880 lm / 2.400 lm lumens measured: 1.550 lm / 1.700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

Vision-X End Cap Fixing for LED Bars Set for mounting Vision-X Xmitter LED bars to their end caps, delivered in pairs, available for different models.

Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

If you are looking for a lot of light in a compact design, the Transporter Xtreme Prime series is the answer - with a diameter of just 6.5", a single spotlight emits up to 8,874 lumens - or less if required, as they can be regulated via an optional dimmer. A special feature is the optional coloured diffusing lenses that are available for the spotlights. This allows the light colour to be matched to the respective conditions. Depending on the lighting requirements, you can choose between 9, 12 and 18 LEDs and between 10° (spot) and 40° illumination. The NACTL-TPX910 version of the Transporter Xtreme Prime has an E-mark when used in pairs as a driving lamp Artikelnummer Anzahl LEDs Lumen Ausleuchtung Abmessungen Stromverbrauch NACTL-TPX-910, mit E-Prüfzeichen 9 4.437 lm 10° 165x200x75 mm 3,75 A / 12 V NACTL-TPX-940 9 4.437 lm 40° 165x200x75 mm 3,75 A / 12 V NACTL-TPX-1210 12 5.916 lm 10° 165x200x75 mm 5 A / 12 V NACTL-TPX-1240 12 5.916 lm 40° 165x200x75 mm 5 A / 12 V NACTL-TPX-1810, mit E-Prüfzeichen 18 8.874 lm 10° 165x200x75 mm 7,5 A / 12 V NACTL-TPX-1840 18 8.874 lm 40° 165x200x75 mm 7,5 A / 12 V

Vision-X Duralux LED worklight Compact worklight with 4 LEDs (5 W each), different light characteristics available, waterproof according to IP68 standard, 1,972 lumens (raw), 1,380 lumens (effective), aluminium housing. Technical data:Luminous flux: 1,972 lumens (raw), 1,380 lumens (effective).Waterproof: according to IP68 standardVoltage: 11-65 VPower consumption: 1.67 A @ 12 VMaterial: aluminium housing, polycarbonate front screenDimensions: 100x65.5x107.6 mmWeight (net): 680 grams The Vision-X Duralux 20 W is available in different illumination versions. In addition, a version as an approved reversing spotlight (with E-mark) is also available.

A-pillar lamp holder Jeep Cherokee & Comanche The brackets allow the mounting of lights on the A-pillar of the Jeep Cherokee XJ and Jeep Comanche MJ, supplied in pairs, incl. blind rivet nuts. Ideal for this mounting location are compact LED lights with tightly focused illumination (thus minimizing reflections from the bonnet), we recommend the Vision-X Cannon LED driving lights here. The brackets are made of stainless steel and can also be supplied with a black powder coating - please select the desired variant below.

Vision-X Xmitter Prime Xtreme LED Worklight The American manufacturer Vision-X has launched new LED work lights with 5 W LED modules. Due to the more compact design of the modules, a significantly higher assembly density and thus an increased luminous range can be achieved with the same size of the lamp housing. In a proven design with a robust aluminium housing and scratch-resistant polycarbonate lens, the lights of the Xmitter Prime XP series are ideally suited for the tough demands of rally and touring vehicles, but also for the demands of professional applications such as forestry and emergency vehicles. All headlamps are available in 10° and 40° illumination, mixed configurations are possible on request at no extra charge (please simply contact us by e-mail), as are white housings for marine applications. Water resistance to IP68 standard, improved thermal design, a voltage range of 10-42 V and dimmability via pulse width modulation round off the product features. Article number     Number of LEDs     Lumen       Illumination         Dimensions          Power consumption NAXIL-PX-6xx           6                             2,958 lm      10°/40°              119x95x84 mm         2.5 A / 12 VNAXIL-PX-12xx        12                            5,916 lm      10°/40°               201x95x84 mm        5.0 A / 12 VNAXIL-PX-18xx        18                            8,874 lm      10°/40°               282x95x84 mm        7.5 A / 12 VNAXIL-PX-30xx        30                           14,790 lm     10°/40°               445x95x84 mm       12.5 A / 12 VNAXIL-PX-36xx        36                           17,748 lm     10°/40°               524x95x84 mm       15.0 A / 12 VNAXIL-PX-54xx        54                           26,622 lm     10°/40°               768x95x84 mm       22.5 A / 12 VNAXIL-PX-72xx        72                           35,496 lm     10°/40°              1011x95x84 mm       30.0 A / 12 VNAXIL-PX-78xx        78                           38,454 lm     10°/40°             1093x95x84 mm        32.5 A / 12 VNAXIL-PX-90xx        90                           44,370 lm     10°/40°             1254x95x84 mm        37.5 A / 12 VThe headlamps under item number "NAXIL-PX-1210" have an E-approval mark.End cap mountings are optionally available.

The Vision-X Solstice Prime Solo LED worklight is a high-quality, compact LED worklight available with different beam patterns and housing colours. Because of its intelligent control system - Prime Drive - the heat emission of the LED-chip is minimised, thus increasing the unit's reliability and life span (manufacturer-guaranteed 50.000 hrs). PWM integrated dimming circuitry allows for dimming capabilty (required optional dimmer). The die-cast sturdy aluminium housing and durable polycarbonate lens protect the light's interior securely. Waterproof to IP 68 (no ingress of dust, protection of water ingress if submerged). Despite its low power consumption (only 0.83A at 12V) and small size the light output of the Solstice Prime Solo with 860 Lumens is enough to use as reverse light, worklight, etc. Please note that the light is not E-marked and can only be used as worklight on road vehicle in Germany. Stainless steel mounting bracket allows for rotation and tilting (105°) while Deutsch DT Series guarantees secure installation. Please choose required beam pattern and housing colour.

Vision-X Utility Market LED worklight The compact (less than 9x5 cm) LED worklight illuminates large areas with its 120° illumination - and with a remarkable 500 lumens it provides plenty of usable light. The low power consumption of only 0.5 A and the multi-voltage capability (12-32 V) make it the ideal problem solver in installation situations where a larger spotlight would be impossible to accommodate. Waterproofness according to IP68 standard and the extremely low weight complete the picture. The lamp is available in various light colours, whether red as a brake light or orange for better visibility in fog/dust - a wide range of applications can be realised. Please note that the LED headlight does not have an E-mark and therefore may not be used on the road and at some motor sport events! Please select the desired light colour. The headlights have an E-mark.

Reflector headlights in bi-LED technology, with low beam, high beam and position light, ECE and SAE approval for cars, 4x4s and motorcycles, integrated control unit, H4 connection, available for right-hand or left-hand traffic. The manufacturer Truck-Lite, which has long been established in the USA, is now also devoting itself to the European market and has very interesting price points with its 7 "and 5x7" Bi-LED main headlights. Compared to the original headlights in halogen technology, LED headlights offer numerous advantages: higher light output ("more light") more pleasant light color ("whiter light"), more similar to sunlight lower energy consumption (32 / 39 W compared to 55 / 60 W with dipped and high beam) insensitive to vibrations (particularly relevant for vehicles with diesel engines and / or off-road use) no need to replace bulbs (approx. 30,000 hours service life) white street lighting, comparable to xenon headlights worldwide one of the cheapest, available 5x7 “LED headlights with E-mark Many users of classic vehicles, especially off-road vehicles (Jeep Cherokee XJ, Jeep Commanche MJ, Jeep Wrangler YJ), are looking for a modern light source with a classic look. Previously offered 5x7 “LED headlights (H6054) were better in terms of illumination than the halogen versions, but mostly still did not offer optimal illumination and were often rather questionable in terms of design. In addition, some of these were retrofit solutions that did not meet the OEM requirements. The Truck-Lite main headlights in 5x7 "format can be installed in the Jeep Cherokee without any additional accessories. Technical specifications: Functions: low beam, high beam, parking light / position lighttwo separate LED arrays 9-33 V multi-voltage design, for use in 12 V and 24 V systems Power consumption (12.8 V): 1.8 A (low beam), 3.6 A (high beam) Power consumption (25.6 V): 1.0 A (low beam), 1.8 A (high beam) Working temperature range: -40 ° C to 50 ° C Overvoltage protection: up to 600 V Coated, robust polycarbonate lens Aluminum housing with coated reflector Connection: Standard H4 Design: Direct exchange for H6054 lights Encapsulated electronics for maximum insensitivity to vibrations, moisture or rust Approval according to ECE and DOT, thanks to the existing E-mark, the Truck-Lite headlights can be used without registration  Please select below how many headlights you need and whether you need them for right-hand traffic (EU) or left-hand traffic (UK).

Vision-X Duralux worklight 30 W Compact worklight with 6 LEDs (5 W each), different light characteristics available, waterproof according to IP68 standard, 2,958 lumens (raw), 2,071 lumens (effective), aluminium housing. Technical data:Luminous flux: 2,958 lumens (raw), 2,071 lumens (effective).Waterproof: according to IP68 standardVoltage: 11-65 VPower consumption: 2.5 A @ 12 VMaterial: aluminium housing, polycarbonate front screenDimensions: 136.7x69x106.5 mmWeight (net): 950 grams Please select the desired illumination angle.

Pipe mounting clamp for headlights etc. For mounting headlights, antennas, LED lights, etc. on roll cages, bars, bull bars, etc. Optionally for 39 mm or 53 mm diameter, aluminium.

Set of 2, with E-mark, for installation Technical data: Dimensions: 69.2x55 mmLED: 1x LED 13 WMounting: 2x M6Approval: ECE (E-mark)Material: aluminium Colour: Black or chrome - please choose.

Set of 2, with E-mark, for installation. Technical data: Dimensions: 69.2x55 mmLED: 1x LED 13 WMounting: 2x M6Approval: ECE (E-mark)Material: aluminiumColour: Black or chrome - please choose.

The American manufacturer Vision-X has launched new LED worklights with 5W LED modules. Thanks to the more compact design of the modules, a significantly higher mounting density and thus an increased light range can be achieved with the same size lamp housing. In a proven design with a robust aluminium housing and scratch-resistant polycarbonate lens, the lights in the Xmitter Prime Low Profile XP series are ideally suited to the tough demands of rally and touring vehicles, but also to the requirements of the professional sector, such as forestry and emergency vehicles. The Xmitter Prome XP Low Profile series has a significantly lower height than the Xmitter Prime XP series, making it ideal for difficult mounting situations.All floodlights are available in 10°, 25°, 40°, 60° or 30°/65° illumination, mixed configurations are possible on request at no extra charge (please contact us by e-mail), as are white housings for marine applications. Water resistance to IP68 standard, improved thermal design, a voltage range of 10-42 V and dimmability via pulse width modulation round off the product features. The floodlights are available with a black or white housing.Product features: - robust die-cast aluminium housing - scratch-resistant polycarbonate lens - with 1-5 adjustable mounting feet - thermally optimised design for optimised heat dissipation - low power consumption (from 15 watts) - waterproof to IP68 standard - 9-32V multi-voltage capability - integrated thermal management - adjustable via optional dimmer using Prime Drive technology All floodlights available in 10°/25°/40°/60°/30/65° illumination variants. Item number LEDs Lumen Dimensions Electricity NAXIL-LPX-3xx 3 1479 lm 118x63x56 mm 1.3 A / 12V NAXIL-LPX-6xx 6 2958 lm 214x63x56 mm 2.6 A / 12V NAXIL-LPX-9xx 9 4437 lm 310x63x56 mm 3.9 A / 12V NAXIL-LPX-15xx 15 7395 lm 502x63x56 mm 6.3 A / 12V NAXIL-LPX-18xx 18 8874 lm 598x63x56 mm 7.5 A / 12V NAXIL-LPX-27xx 27 13311 lm 886x63x56 mm 11.3 A / 12V NAXIL-LPX-33xx 33 16269 lm 1093x63x56 mm 13.8 A / 12V NAXIL-LPX-36xx 36 17784 lm 1174x63x56 mm 15.0 A / 12V The headlights under item numbers "XIL-LPX910" and "XIL-LPX1810" have an E-mark.Please select the desired number of LEDs, the type of illumination and the housing colour.

Set of 2, with E-mark, for installation. Technical data: Dimensions: 69.2x55 mmLED: 1x LED 13 WMounting: 2x M6Approval: ECE (E-mark)Material: aluminiumColour: Black or chrome - please choose.

Vision-X LED spotlight with E-mark LED headlights from Vision-X with E-mark for legal use on the road - the E-mark is valid when the headlights are used in pairs and used as driving lights. Price per pair. From currently four different product series, headlamps from Vision-X are now ECE certified, i.e. they may legally be used in road traffic as main beam headlamps. This test only applies to one model with the specified number of LEDs, brightness and beam angle. We have summarised these models again here and offer them as a pair. The reference number of a single spotlight is 7.5. All these spotlights have in common that they are equipped with 9 LEDs of 5W each, which results in 4,437 lumens per spotlight. They differ in their respective construction, mounting and adjustability. The EPX-910 model has a square design (3x 3 LEDs) while the TPX-910 model has a classic round design and fits very well with classic off-road vehicle models such as the Land Rover Defender, Jeep Wrangler or Toyota Land Cruiser. It also allows the use of coloured lens covers to improve visibility in certain weather situations. The two models, LPX-910 and HPX-910, both have a strip design (approx. 35cm wide) and differ in their mounting. While the LPX model has an adjustability of 15°, the HPX-910 shines with a very sophisticated mount that allows an adjustment of 180°, making it suitable for difficult mounting situations. Common product features:     Equipped with nine LEDs per spotlight in state-of-the-art 5W technology    Light output: 8,874 lumens per pair of spotlights    robust die-cast aluminium housing in various designs (round, square, strip-shaped)    scratch-resistant polycarbonate lens    thermally optimised housing for best possible heat dissipation    low power consumption (only 45 watts per spotlight)    waterproof according to IP68 standard    9-32 V multi-voltage capability    integrated thermal management    waterproof German plug    adjustable via optional dimmer thanks to Prime Drive technology The models in comparison:Model         Number of LEDs                 Light output                      Design         Adjustability         Diffusers               TPX-910     each 9x 5 W per spotlight     8.874 lumens per pair             round                 15°              optionally availableEPX-910     each 9x 5 W per fixture        8.874 lumens per pair             square               105°    LPX-910     each 9x 5 W per fixture         8.874 lumens per pair           groin-shaped        15°             optionally availableHPX-910     each 9x 5 W per fixture         8.874 lumens per pair           groin-shaped      180°    

Vision-X Solstice Solo 1100 LED worklight Compact, all-purpose LED worklight, power-saving (10 W), bright (1,052 lumens raw, 736 lumens effective), versatile (9-48 V), waterproof to IP68 standard, various housing colours available. With 10°, 30°, 60° and 30/65° (elliptical) illumination, all different lighting characteristics are covered, from narrowly focused light beam to diffuse floodlight. Technical data:Light output (raw): 1,052 lumensLight output (effective): 736 lumenLED type: 1x 10 WPower consumption: 0.83A@12VWaterproof: IP68 standardBeam angle: optional 10°, 30°, 60°, 30/65° (elliptical)Net weight: 340 gramsDimensions: 55x84,5x60 mmHousing colour: optionally black or whiteMaterials: Housing aluminium, mounting material stainless steel, front screen polycarbonate Please also note the optional accessories!

Vision-X Utility Market Xtreme LED worklight 7x 5W Worklight with 7x 5 W LED, 3,451 lumen, only 2.9 A power consumption (12 V), multi-voltage capable (9-32 V), black or white, round or square housingDimensions    - Height incl. base: approx. 139 mm (round models)    - Height incl. base: approx. 159 mm (square models)    - Width: approx. 113 mm    - Depth: approx. 80 mmThe headlights with 10° illumination have an E-approval mark.Please select the desired model.

Vision-X Optimus LED worklight LED worklight in 10 W technology, 860-3,440 lumen, 10-40 W, available in black, grey, chrome and white, IRIS reflector for extremely long range.

Side indicators for Land Rover Defender 90/110/130, E-marked, plug'n'play fitting, price for pair The indicators are available in orange, black and white, while flashing, of course, in orange. Because they are E-marked they can be fitted without TUV registering them. They work with the standard Defender indicator relay as well as with the adjustable indicator relay of our LED position light set - so you needn't buy or change the indicator relay! On Defender TD4 and TD5 the fitting is "plug&play", i.e. the plugs and sockets match and the wind does not need to be modified. Older vehicles (before MY1998) require the modification of the socket on the indicator side and the cutting on the wing. How-to installastion video: https://www.youtube.com/watch?v=4ei6H69-huU

Truck-Lite LED reversing spotlight The reliable Truck-Lite LED with E-approval mark actively supports you in illuminating your working area. The reversing spotlight is available in a square or round design (selectable above under "Design"). Technical data:    Voltage: 12/24 V    Length of cable harness: 0.25 m    Lumen: 800

LED - Reversing light Product information:     LED-LIGHT    PRC7263LED    Reversing lightVehicle:    Defender - 1987 - 2006    Series 3

 LED - rear fog light Product information:    LED-LIGHT    Code: PRC7254LED    Rear fog lightVehicles:    Defender - 1987 - 2002    Series 3

Universal Auxiliary Headlight Brackets for the New Defender Proper off-road vehicles aren’t really complete without additional front lights – on off-road tracks, in bad weather or on overland routes you simply can’t do without extra lighting. The new Defender has everything a heavy duty 4x4 needs, but the stylish body isn’t made for easily attaching extras like additional off-road lamps. Our versatile front light holders for the new Landy are specifically designed to easily mount off-road lights like our Vision-V GEN2 to the front of your L663 – most importantly, without any damage to the beautifully styled radiator grille. The holders are powder-coated in black and can be attached to the front grille in the exact position you require. The perfect fit is achieved by inserting the holder’s four lugs into the grille’s grid and fastening the unit by tightening the screw on the stainless-steel clamping plate. This creates a perfect fit and prevents the lights from moving or scratching the grille. Mounting the holders is a question of minutes and can be done entirely from the outside. The off-road light holders come in pairs.  

Licence plate light with integrated reversing camera Licence plate light with integrated reversing camera. They replace the unsightly original plastic part and offer more than just an additional eye-catcher on the vehicle. The bright LED lighting ideally illuminates the number plate in all weather conditions and ensures a long service life.The integrated reversing camera provides the best view to the rear and thus prevents damage when reversing. So you have a huge relief AND a cool gimmmik with minimal effort.Product details:     made of high-strength aluminium     corrosion & UV resistant coating     camera resolution 480-520 TV     camera with day and night vision function     Camera is tiltable     Camera viewing angle is 120° - 140° horizontal angle     Camera is IP67 certified (dust and waterproof) Scope of delivery:     LED number plate light     Rear view camera     Seal and fit kit     6m long chinch video cable     1,5m long 12V power cable The original holes for the number plate lighting are used. On some models, however, the lighting may protrude slightly, in which case 2 additional holes could be placed so that the lighting rests on top.Please note that NO monitor is included in the scope of delivery!All monitors with a cinch connection can be used.

Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.

OSRAM neck light Light is versatile Technical data: Rated voltage: 3.7V Luminous flux: 265lm Light colour LED: white This rechargeable neck light with two individually detachable torches from OSRAM is perfect for professional and private use. With two light functions up to 265lm (high), 130lm (low) and an adjustable 90 degree angle, this offers different settings for a variety of tasks. The LEDinspect Wearable Neck Light is particularly impressive with its great flexibility - it can be used around the neck, on the head, in the hand or on a magnetic surface. The rechargeable battery allows up to 3 hours of operation at high power or up to 4.5 hours at low power and with a charging time of only about 1.5 hours, this OSRAM lamp is also quickly ready for use again. A USB Micro B charging cable with two connections for the individual lamps to charge the lithium battery is included. In accordance with protection class IP54, this lamp has protection against the penetration of dust particles and against splashing water and is tested for impact resistance in accordance with IK07. With a weight of only 115g and the flexible design, the product is easy to store and transport and is therefore ideal as a light for handicraft work, craft activities, car repairs and also in everyday life.OSRAM also provides a 2-year warranty*.*Exact conditions at: www.osram.de/am-garantie 2-year guarantee - this guarantee exists independently of the existing free statutory rights to claim for defects. The statutory defect rights are not restricted by this guarantee. Detachable torches: High flexibility - can be placed around the neck, on the head, in the hand or on a magnetic surface. Two light functions: Up to 265lm (strong) & 130lm (weak). Charging time: With a charging time of only 1.5 hours, this OSRAM light is quickly ready for use. Additional product data: Battery type: Rechargeable Battery: High-quality lithium-ion battery 2x3.7V Li-Ion 500mAh included in delivery Dimensions: W 39mm x L 224mm x H 150mm    

Additional Interior Light for Land Rover NEW DEFENDER  The new Defender is being marketed as a true workhorse, but – as always – there’s room for improvement when it comes to the practicalities of working with your L663 on a day-to-day basis. One such aspect is definitely the lighting for the load space in the back. The standard set-up is somewhat sparse but most of all it lacks proper roof lights. This is especially problematic since the cargo area is often filled up or modified by installed racks, boxes and the like. Our LED light bar solves this problem with more than sufficient 396 Lumens light intensity. The lightbar is easily installed on the trim above the cargo door and illuminates the entire load space – helping you to quickly find tools and equipment and ensuring safe working conditions day or night. Mounting the roughly 36 cm long and 2 cm wide LED lightbar is really easy. Simply click the two fastening clips into the edge of the upper door trim. The clips’ custom-shape will hold the lightbar firmly in position. Connecting the device to the Defender’s wiring is just as quick by simply pushing the LED bar’s wire behind the trim and pulling it along the D-pillar towards the standard lamp housing by the fuse box. In most cases, you won’t even have to remove the trim panels. Lastly, the LED bar’s connector is simply plugged into the standard lamp’s socket. The bar is activated and deactivated as required by its own touch button. Dimensions: 362mm x 25 mm x 11mm 

XPL Carbon Roof Cap Kit is a high performance lightbar solution for the roof Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The XPL Carbon Roof Cap Kit by Vision X is an elegant and extremely powerful LED lightbar solution for the roof of new Defenders from MY 2021. The aerodynamically shaped carbon element holds two Vision X XPL Lo Pro light bars. The array of CREE LEDs produces 45 W per bar and a beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL light bar also features backlighting that can be used as daytime running lights. The installation on the roof is minimally invasive. The mounting kit contains a drill template, all required fastening and sealing materials as well as the electric connections. Specifications XPL Lo Pro Lightbars: LEDs: 5W per LED Housing material: Aluminum Light color temperature: 6000 Kelvin Voltage: 9-32V DC Current: 0.75A~7.5A@24V DC - 1.25A~15A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Dual mounting standard Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, E mark IRIS reflector technology The XPL is equipped with a backlit halo that can be used as a daytime running light. (SAE compliant for 20" and below). Scope of delivery: Complete carbon element with two XPL-H9 light strips, brackets and wiring harness including precise fitting drilling template.

New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Multi LED  Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The Cannon Light Multi-LED "light cannons" from Vision X are extremely powerful additional front headlights for uncomplicated installation in the slot of the standard radiator grille of the New Defender. The 7 Watt LEDs guarantee excellent high beam illumination up to at least 215 m and can be configured with different covers for up to 25 types of use - off-road as well as on-road, for sport or work. The aluminium and polycarbonate lamp housing is as light as it is robust and can be flexibly adjusted. Specifications for Cannon 4.7" MULTI LED: single LED: 7W Housing material: hybrid Light colour temperature: 6000 Kelvin Dimensions: 137/134/94mm Weight: 1,3 kg Voltage: 9-32V DC Current: 2.04A@24V DC - 4.08A@12V DC Vibration resistance: 21.2 Grms Lens material: Acrylic Certifications: CE, RoHS, IEC 62471 Weatherproof German plug The installation is minimally invasive. The installation kit is supplied with a ....contains all the necessary fixing materials and wiring. Scope of delivery: Complete radiator grille kit for New Defender with two CPZ710 GEN2 cannon headlights, brackets and wiring harness including detailed installation instructions.  

New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Single LED  Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The Cannon Light single-LED "light cannons" from Vision X are extremely powerful additional front headlights for uncomplicated installation in the slot of the standard radiator grille of the New Defender. The LEDs with 40 watts each guarantee excellent high beam illumination up to at least 1000 m and can be configured with different covers for up to 25 types of use - off-road as well as on the road, for sport or work. The lamp housing made of aluminium and polycarbonate is as light as it is robust and can be flexibly adjusted. The installation is fairly simple and requires roughly 4 hrs. Both the grille’s plastic substructure and the lower opening need to be modified by sawing out specific areas. Detailed instructions, fastening materials and electric connections are included in the delivery. Specifications for Cannon 4.7" Single LED: LEDs: Single LED 40W Housing material: Hybrid Light colour temperature: 6000 Kelvin Dimensions: 137/134/94mm Weight: 0,91 kg Voltage: 9-32V DC Current: 1.67A@24V DC - 3.33A@12V DC Vibration resistance: 21.2 Grms Lens material: Acrylic Certifications: CE, RoHS, IEC 62471 Weatherproof German plug   The installation is minimally invasive. The installation kit is supplied with a ....contains all the necessary fixing materials and wiring. Scope of delivery: Complete radiator grille kit for New Defender with two CPZ110 GEN2 cannon headlights, brackets and wiring harness including detailed installation instructions.