Lighting

Increased brightness for long-distance and close-range illumination Especially when driving on country roads and unpaved paths, increased visibility can be an important safety factor. The LEDriving® Functional Series FX Gen 2 portfolio provides additional close-range and far-field illumination on dark roads. Even in poor visibility conditions or at dusk, the high-performance LEDs achieve a range of up to 635 metres and daylight conditions with a colour temperature of 6000 Kelvin. The auxiliary headlamps of the FX series impress with a special reflector design and not only provide a modern and appealing look, but also reduce glare for more visibility in road traffic. They can be used both as additional LED headlights and as powerful worklights. Both versions of the lights are fully ECE-compliant and therefore suitable for use in road traffic. In addition, OSRAM has developed a special mounting kit that is compatible with all auxiliary headlamps of the FX Gen 2 series for individual mounting. Versatile in use, they defy numerous environmental influences and are particularly light and at the same time robust and resistant thanks to high-quality materials such as the aluminium housing and the stable polycarbonate lens. Complete reverse polarity protection prevents damage due to overvoltage and contributes to a longer service life. The FX series auxiliary lights have been tested and validated in a DIN-certified environmental simulation laboratory for extreme external influences with regard to water, dust, shock, heat, cold and permanent vibration in accordance with the highest IP & IK protection classes IP6K8 & IP6K9K. Their variability gives the FX series a flexible range of applications. They can be fitted to cars, trucks, agricultural machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and quads. OSRAM provides a 5-year warranty on these products. Product details: OSRAM LEDriving® auxiliary headlamp Lightbar FX750-CB SM GEN 2 | LEDDL133-CB SMFeatures: COMBO BEAM = Combined beam pattern for both far-field and near-field illumination Light beam of 450m Luminous flux: 5,990lm, rated power: 94W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection Single mount certified1) (2x ECE R149), ECE R10, ECE (Ref. 2x 30). Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 25 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1) Product description: Outstanding illumination, performance, quality, form, durability and functionality. Maximum optical efficiency, effectiveness and homogeneous light distribution Coverage of far-field illumination Perfectly matched to individual requirements and needs for multivariant use Special reflector design for an attractive and modern appearance and reduced glare Robust and resistant - for a long service life Increased safety off-road and on-road ECE-compliant and approved for use in road traffic Fields of application: Cars, trucks, 4x4s, ATVs, agricultural vehicles, commercial vehicles, construction vehicles, quads, caravans, etc. 1) Exact conditions at: www.osram.de/am-garantie Note: Single mount - no installation in pairs necessary, as two certified light sources are used.  

Osram LED Lightbar VX1000-CB, auxiliary headlamp with approval Combo Beam: Combined close-range and far-field illumination Double ECE certification - 2 x ECE R112 For 12 V & 24 V Up to 525 m long light beam 36 long-life OSRAM high-power LEDs ECE reference number: 37.5 + 37.5 Protection class: IP67 Remarkable visibility on dark country roads, forest tracks and off-road, on-road and off-road - this can be achieved with the OSRAM LEDriving® Lightbar VX1000-CB SM. When the road and the surroundings need to be illuminated more intensively, the OSRAM LEDriving® auxiliary and worklights rise to the challenge with ease. Innovative design and homogeneous LED light for reduced glare. With 36 long-life OSRAM high-performance LEDs, the VX1000-CB SM achieves a range of up to 525 meters, giving drivers impressive long-range visibility on and off the road. Even in twilight and reduced visibility due to external environmental influences, the OSRAM LEDriving® Lightbar VX1000-CB SM can provide conditions similar to daylight with up to 6000 Kelvin. The powerhouse with up to 6000 lumens of luminosity scores with maximum optical efficiency and homogeneous light distribution. This results in improved visibility for you and improved visibility of your vehicle by other road users, consequently also increased safety on-road and off-road. Versatile and flexible in use. On-road and off-road, the OSRAM LEDriving® Lightbar VX1000-CB SM is an effective and efficient addition to your vehicle. No registration or entry in the vehicle documents is necessary for these ECE-certified LED auxiliary headlights)ECE reference number: 37.5 + 37.5The LED headlamp can be fitted to cars, trucks, agricultural machinery, forestry machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and quads) Application note: For further application information, please refer to the product data sheet.

NOLDEN LED high beam headlights, 70mm Set of 2, with E-mark, for installation   Technical data: Dimensions: 69.2x55 mm LED: 1x LED 13 W Fastening: 2x M6 Approval: ECE (E-mark) Material: Aluminum   Color: Black or chrome - please select.

NOLDEN LED fog light, 70mm Set of 2, with E-mark, for installation. Technical data: Dimensions: 69.2x55 mm LED: 1x LED 13 W Fastening: 2x M6 Approval: ECE (E-mark) Material: Aluminum Color: Black or chrome - please select

Vision-X XPR LED Bar In 2015, the American manufacturer Vision-X launched new LED bars with angled outer modules (from model NAXPR-9M) for wide and broad illumination. The angled modules on the outside and straight modules on the inside provide optimised illumination that reaches into the distance AND the width. Powerful 10W LED modules in combination with 38mm IRIS reflectors provide massive light output - at competitive prices! Article number       Number of LEDs     Alignment of LEDs   Lumen raw     Lumen effective    Dimension    Power consumptionNAXPR-3,with E-mark            3                          Straight           3,237 lm              2,216 lm         153 x 80 x 81 mm     2.5 A / 12 VNAXPR-6, with E-mark           6                          Straight           6,474 lm              4,431 lm         292 x 80 x 81 mm      5.0 A / 12 VNAXPR-9M, with E-mark        9                           Mixed             9,711 lm             6,648 lm          483 x 80 x 81 mm      7.5 A / 12 VNAXPR-12M, with E-mark      12                         Mixed             12,948 lm            9,064 lm         609 x 80 x 81 mm      10.0 A / 12 VNAXPR-15M                         15                         Mixed             16185 lm             11330 lm         746 x 80 x 81 mm      12.5 A / 12 VNAXPR-18M                         18                         Mixed             19,422 lm            13595 lm         881 x 80 x 81 mm      15.0 A / 12 VNAXPR-21M                         21                         Mixed             22,659 lm            15,861 lm        1010 x 80 x 81 mm    17.5 A / 12 VNAXPR-24M                         24                         Mixed             25,896 lm            18,127 lm        1150 x 80 x 81 mm     20.0 A / 12 VNAXPR-27M                         27                         Mixed             29,133 lm            20,393 lm        1285 x 80 x 81 mm     22.5 A / 12 V The luminaire can be mounted either upright/hanging using the supplied feet or on the end caps of the LED strips using the optional end cap mounting sets. An integrated thermal management system to protect the LED modules and the cable harness supplied complete the equipment. An IP69K rating ensures excellent protection against dust and water, even in the harshest environments.Technical data:Material housing: aluminium, black powder-coatedLens material: PolycarbonateWater- and dustproof: According to IP69k standardVoltage range: 11-32 volts

Subaru Installation Kit for Nolden 90 mm Combination Lights (Fog Lights/Daytime Running Lights) Many Subaru models are renowned for their suitability for everyday use, safety and reliable performance in all weather conditions. This is precisely why it is worth switching to modern LED technology: it offers powerful light output, high reliability, a significantly longer lifespan than conventional bulbs and, on top of that, a more attractive appearance. This offer comprises a set of Nolden 90 mm LED combination lights for daytime running lights and fog lights, including matching adapter cables. The lights combine a daytime running light ring using light guide technology with an LED fog light in a high-quality chrome housing. Nolden uses high-quality Osram LEDs with low power consumption.    With this installation kit, you can fit modern lighting technology to your Subaru and replace vulnerable, corroded or damaged original lights with a high-quality LED solution. Installation is straightforward, as the matching adapter cables are already included in the scope of delivery.    The Nolden 90 mm combination lights combine daytime running lights and fog lights in a compact, high-quality unit. This not only ensures a modern look, but also provides a functional and long-lasting upgrade for your vehicle. This conversion is a particularly sensible improvement for vehicles that are used all year round and are often driven in poor visibility conditions.   Suitable for the following Subaru models: • Subaru Forester (MY2012–2025)  • Subaru Impreza (MY2012–2025)  • Subaru Levorg (MY2015–2021)  • Subaru Outback (MY2014–2025)  • Subaru WRX (MY2014–2021)  • Subaru XV (MY2012–2023)    Contents: • 1 pair of Nolden 90 mm LED daytime running/fog lights, chrome  • 2 adapter cables   

Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life. With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light. Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play. If you only need the adapter cables, you can find them here. The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights. Scope of delivery: 1 x pair of Nolden 90 mm LED daytime running/fog lights chrome Adapter: 2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin.   Note:  The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard. Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).    

LED signal lamps for Land Rover Defender, smoke grey The advantages of LEDs are well known: low power consumption, strong light output, vibration resistance and a long lifetime. In this smoke grey signal lamp set for the Land Rover Defender (Series III, Defender 90, Defender 110, Defender 130) the following LEDs are included: The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The set with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The set with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light Note that indicators must be orange by law. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied and also an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can be used. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

NCC 90 mm LED fog & daytime running lights Daytime running lights and LED fog lights in one headlight! Control unit integrated. ECE and SAE certification. Characteristics: Daytime running light in fiber optic technology LED fog lights With and without metal holder Delivery: In pairs Technical specifications:Dimensions: 90x74 mmLEDs & Type: 3 pcs OSRAM H2L531.TE / OSRAM LUW HWQPVoltage: 12 and 24 VPower at 12 V: Daytime running light: 8.1WFog lights: 8.8 WMounting points: 4 Tapped holes M5Weight: 350 gCertifications: ECE R10, R19, R87, SAEVentilation: DiaphragmMaterial Housing: ADCMaterial of end plate: PC, hardenedTemperature range: -40 ° C - + 80 ° CLead and length: 0.75 mm2 FLRY, l = 200 mmPlug daytime running light: AMP Superseal 282087-1, three-poleFog lights: H8 / H11, two-pole

Vision-X Explorer Xtreme Prime LED worklight If the question is for a lot of light in a compact design, the Explorer Xtreme Prime range is the answer - in square 4" design or classic 6" round design, a single spotlight emits up to 5,423 lumens - or less if required, as they are adjustable via an optiional dimmer. Depending on the lighting requirements, there is a choice of 9 (square design) or 11 (round design) LEDs, as well as 10°/25°/40°/60° or 30/65° illumination. In the NACTL-EPX-910 version (i.e. 4" square with 10° illumination), the Explorer Xtreme Prime has an E-mark when used in pairs as a driving lamp.Product features:     robust die-cast aluminium housing    scratch-resistant polycarbonate lens    105° adjustable bracket    Vertically arranged ribs for optimised heat dissipation    low power consumption (only 45 or 55 watts)    waterproof according to IP68 standard    9-32V multi-voltage capability    Integrated thermal management    Prime Drive technology adjustable via optional dimmerTechnical data:Article number Number of LEDs Lumen Illumination Dimensions Power consumptionNACTL-EPX-910, with E-mark 9 4,437 lm 10° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-925 9 4,437 lm 25° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-940 9 4,437 lm 40° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-960 9 4,437 lm 60° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-93065 9 4,437 lm 30/65° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-1110 11 5,916 lm 10° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1125 11 5,916 lm 25° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1140 11 5,916 lm 40° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1160 11 5,916 lm 60° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-113065 11 5,916 lm 30/65° 182x174x81 mm 4.6 A / 12 V The price refers to one piece. For operation according to StVZO, two copies of the NACTL-EPX-910 must be installed. Please select the desired configuration.

Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.

Powerful LED Driving Light – NOLDEN Series 900, 90mm This NOLDEN 90 mm LED driving lamp is suitable as a supplement to the LED low beam headlamp of the same series. Select the desired variant (with or without parking light). Technical data: Dimensions: 90x105 mm LED: OSRAM Ostar Voltage: 12/24 V Power: main beam: 16 W Weight: 670 g Tested according to EN 50 155 Material: Housing ADC Material lens glass (hardened) Colour: Black Scope of delivery: 1x NOLDEN 90 mm LED spotlight

Powerful LED auxiliary headlamps for off-road and on-road use Remarkable visibility on dark country roads, forest tracks, off-road and on-road - this is achieved with the OSRAM LEDriving® Value Series VX portfolio. The auxiliary headlamps combine affordability with exceptional performance, quality and functionality, providing users with impressive illumination on and off the road. Even in dim light and with limited visibility due to external environmental factors, the auxiliary headlights can provide daylight-like conditions with up to 6000 Kelvin. The power pack with up to 13700 lumens scores with highest optical efficiency and homogeneous light distribution. The auxiliary spotlights are available in two different versions: single-row for a compact and slim appearance and double-row for a more robust design. Versatile in use, they defy numerous environmental influences and, thanks to high-quality materials such as the aluminium housing and the sturdy polycarbonate lens, are particularly light and at the same time robust and resistant. The auxiliary headlamps have been tested and validated in a DIN-certified environmental simulation laboratory for extreme external influences with regard to water, dust, impacts, heat, cold and permanent vibration in accordance with the highest IP & IK protection classes IP6K8 & IP6K9K. They are an effective and efficient addition to your vehicle and can be fitted to cars, trucks, agricultural machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and quad bikes. Product details: Features: OSRAM LEDriving® auxiliary headlamp Lightbar VX1000-CB DR SM | LEDDL121-CB DR SM COMBO BEAM = Combined beam pattern for both far-field and near-field illumination Luminous flux: 10,100lm, rated power: 108W Light beam of 385m, beam angle (horizontal/vertical):11°/ 11° Cold white light with 6000K For 12V & 24V vehicles 84 powerful OSRAM LEDs Open cable ends, cable length: 450mm Over- and undervoltage protection Single mount certified 2) - (2x ECE R149), (Ref. 2 x 17,5), ECE R10 Highest protection classes: IP6K8 & IP6K9K Robust and resistant - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Includes brackets for various mounting options: suspended, upright and side-mounted 2-year OSRAM guarantee 1)  Product description: Combines affordability with excellent illumination, performance, quality, form, durability and functionality. Increased safety off-road and on-road Perfectly matched to individual requirements and needs for multivariant use Available as: single-row for a compact and slim appearance and as double-row for a more robust design Improved visibility and visibility in low light conditions Robust and durable - for a long service life Proven quality and improved visibility at an affordable price ECE compliant and approved for road use OSRAM provides a 2-year guarantee on these products 1). Fields of application: Cars, trucks, 4x4s, ATVs, agricultural vehicles, commercial vehicles, construction vehicles, quads, caravans. 1) Exact conditions at: www.osram.de/am-garantie 2) Note: Single Mount - no paired installation necessary, as two certified light sources.

NOLDEN Daytime running lights Premium Line Classic Our NOLDEN day driving light set consists of 2 lamps, control unit, wiring loom. Comes with fixings and fitting instructions.

Increased brightness for long-distance and close-range illumination Especially when driving on country roads and unpaved paths, increased visibility can be an important safety factor. The LEDriving® Functional Series FX Gen 2 portfolio provides additional close-range and far-field illumination on dark roads. Even in poor visibility conditions or at dusk, the high-performance LEDs achieve a range of up to 635 metres and daylight conditions with a colour temperature of 6000 Kelvin. The auxiliary headlamps of the FX series impress with a special reflector design and not only provide a modern and appealing look, but also reduce glare for more visibility in road traffic. They can be used both as additional LED headlights and as powerful worklights. Both versions of the lights are fully ECE-compliant and therefore suitable for use in road traffic. In addition, OSRAM has developed a special mounting kit that is compatible with all auxiliary headlamps of the FX Gen 2 series for individual mounting. Versatile in use, they defy numerous environmental influences and are particularly light and at the same time robust and resistant thanks to high-quality materials such as the aluminium housing and the stable polycarbonate lens. Complete reverse polarity protection prevents damage due to overvoltage and contributes to a longer service life. The FX series auxiliary lights have been tested and validated in a DIN-certified environmental simulation laboratory for extreme external influences with regard to water, dust, shock, heat, cold and permanent vibration in accordance with the highest IP & IK protection classes IP6K8 & IP6K9K. Their variability gives the FX series a flexible range of applications. They can be fitted to cars, trucks, agricultural machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and quads. OSRAM provides a 5-year warranty on these products. Product details: OSRAM LEDriving® auxiliary headlamp Lightbar FX500-SP SM GEN 2 | LEDDL131-SP SM Features: SPOT BEAM = For particularly focussed high beam distribution Light beam of 470m Luminous flux: 3,930lm, rated power: 56W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection Single mount certified1) (2x ECE R149), ECE R10, ECE (Ref. 2x 30). Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 15 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1) OSRAM LEDriving® auxiliary headlamp Lightbar FX500-CB SM GEN 2 | LEDDL132-CB SM Features:COMBO BEAM = Combined beam pattern for both far-field and near-field illumination Light beam of 380m Luminous flux: 3,750lm, rated power: 56W Cold white light with 6000K For 12V & 24V vehicles DT04-2P, DT06-2S connector, cable length: 1200mm Over- and undervoltage protection Single mount certified1) (2x ECE R149), ECE R10, ECE (Ref. 2x 20). Highest protection classes: IP6K8 & IP6K9K Robust and durable - shatterproof polycarbonate lens and die-cast aluminium housing with special black coating Efficient reflector design with 15 OSRAM high-power LEDs Side brackets included 5-year OSRAM guarantee 1)   Product description: Outstanding illumination, performance, quality, form, durability and functionality. Maximum optical efficiency, effectiveness and homogeneous light distribution Coverage of far-field illumination Perfectly matched to individual requirements and needs for multivariant use Special reflector design for an attractive and modern appearance and reduced glare Robust and resistant - for a long service life Increased safety off-road and on-road ECE-compliant and approved for use in road traffic Fields of application: Cars, trucks, 4x4s, ATVs, agricultural vehicles, commercial vehicles, construction vehicles, quads, caravans, etc.1) Exact conditions at: www.osram.de/am-garantieNote: Single mount - no installation in pairs necessary, as two certified light sources are used.  

Osram LED Lightbar MX250-CB with PL, auxiliary headlamp with approval Remarkable visibility on dark country roads, forest tracks and off-road, on-road and off-road - this is what you can achieve with the OSRAM LEDriving Lightbar MX250-CB. With 26 long-life high-performance LEDs, the OSRAM LEDriving Lightbar MX250-CB achieves a range of up to 320 metres and can thus help the driver to achieve impressive far-sightedness on the road and off-road. Even in twilight and with reduced visibility due to external environmental influences, the OSRAM LEDriving Lightbar MX250-CB with up to 6.000 Kelvin for conditions similar to daylight. The powerhouse with up to 2.700 lumen luminosity scores with highest optical efficiency and homogeneous light distribution. This results in improved visibility for you and improved visibility of your vehicle by other road users, consequently also increased safety on-road and off-road.Whether on-road or off-road - the OSRAM LEDriving Lightbar MX250-CB impresses with its performance and a service life of up to 5.000 hours. Combo Beam - Designed for both far-field and near-field illumination PL - Position light approval ECE Certification - ECE R112 (driving lamp approval) ECE certification - ECE R7 (position light approval) up to 320 m long beam ECE reference number: 30 must be installed in pairs as approved driving lamp (two-lane vehicles) combined illumination for near and far field Application noteFor further application information, please see the product data sheet

Osram LED MX180-CB 7'' round with PL, auxiliary headlight with approval Remarkable visibility on dark country roads, forest tracks and off-road, on-road and off-road - this can be achieved with the OSRAM LEDriving Round MX180-CB. With 12 long-life high-performance LEDs, the OSRAM LEDriving Round MX180-CB headlamp achieves a range of up to 300 metres and can thus help the driver to achieve impressive far-sightedness on the road and off-road. Even in twilight and with reduced visibility due to external environmental influences, the OSRAM LEDriving Round MX180CB headlight can provide conditions similar to daylight with up to 6.000 Kelvin. The power pack with up to 3.000 lumen luminosity scores with highest optical efficiency and homogeneous light distribution. This results in improved visibility for you and improved visibility of your vehicle by other road users, consequently also increased safety on-road and off-road. Whether on-road or off-road - the OSRAM LEDriving Round MX180-CB headlight impresses with its powerful performance and a long service life of up to 5.000 hours. Combo Beam - Designed for both far-field and near-field lighting. ECE Certification - ECE R112 (driving lamp approval) ECE certification - ECE R7 (position light approval) Up to 300 m long beam ECE reference number: 25 must be installed in pairs as approved driving lamp (two-lane vehicles) combined illumination for near and far field Application note For further application information, please see the product data sheet

Vision-X Utility Market Xtreme LED worklight 7x 5W Worklight with 7x 5 W LED, 3,451 lumen, only 2.9 A power consumption (12 V), multi-voltage capable (9-32 V), black or white, round or square housingDimensions    - Height incl. base: approx. 139 mm (round models)    - Height incl. base: approx. 159 mm (square models)    - Width: approx. 113 mm    - Depth: approx. 80 mmThe headlights with 10° illumination have an E-approval mark.Please select the desired model.

Vision-X Xmitter Prime Xtreme LED Worklight The American manufacturer Vision-X has launched new LED work lights with 5 W LED modules. Due to the more compact design of the modules, a significantly higher assembly density and thus an increased luminous range can be achieved with the same size of the lamp housing. In a proven design with a robust aluminium housing and scratch-resistant polycarbonate lens, the lights of the Xmitter Prime XP series are ideally suited for the tough demands of rally and touring vehicles, but also for the demands of professional applications such as forestry and emergency vehicles. All headlamps are available in 10° and 40° illumination, mixed configurations are possible on request at no extra charge (please simply contact us by e-mail), as are white housings for marine applications. Water resistance to IP68 standard, improved thermal design, a voltage range of 10-42 V and dimmability via pulse width modulation round off the product features. Article number     Number of LEDs     Lumen       Illumination         Dimensions          Power consumption NAXIL-PX-6xx           6                             2,958 lm      10°/40°              119x95x84 mm         2.5 A / 12 VNAXIL-PX-12xx        12                            5,916 lm      10°/40°               201x95x84 mm        5.0 A / 12 VNAXIL-PX-18xx        18                            8,874 lm      10°/40°               282x95x84 mm        7.5 A / 12 VNAXIL-PX-30xx        30                           14,790 lm     10°/40°               445x95x84 mm       12.5 A / 12 VNAXIL-PX-36xx        36                           17,748 lm     10°/40°               524x95x84 mm       15.0 A / 12 VNAXIL-PX-54xx        54                           26,622 lm     10°/40°               768x95x84 mm       22.5 A / 12 VNAXIL-PX-72xx        72                           35,496 lm     10°/40°              1011x95x84 mm       30.0 A / 12 VNAXIL-PX-78xx        78                           38,454 lm     10°/40°             1093x95x84 mm        32.5 A / 12 VNAXIL-PX-90xx        90                           44,370 lm     10°/40°             1254x95x84 mm        37.5 A / 12 VThe headlamps under item number "NAXIL-PX-1210" have an E-approval mark.End cap mountings are optionally available.

Practical mounting set for J.W. Speaker 8700/8700EVO Mounting set for installing a J.W.Speaker 8700 or 8700 Evo LED headlight, for single-point mounting, chrome-coloured.

Osram LED Lightbar SX500-CB, auxiliary headlamp with approval Remarkable visibility on dark country roads, forest tracks and off-road, on-road and off-road - this can be achieved with the OSRAM LEDriving Lightbar SX500-CB. With 18 long-life high-performance LEDs, the OSRAM LEDriving Lightbar SX500-CB achieves a range of up to 300 metres and can thus help the driver to achieve impressive far-sightedness on the road and off-road. Even in twilight and with reduced visibility due to external environmental influences, the OSRAM LEDriving Lightbar SX500-CB can provide conditions similar to daylight with up to 6000 Kelvin. The powerhouse with up to 3900 lumens of luminosity scores with maximum optical efficiency and homogeneous light distribution. This results in improved visibility for you and improved visibility of your vehicle by other road users, consequently also increased safety on-road and off-road. Whether on-road or off-road - the OSRAM LEDriving Lightbar SX500-CB impresses with its performance and a service life of up to 5000 hours. Combo Beam - Designed for both far-field and near-field illumination. ECE certification - ECE R112 (driving lamp approval) Up to 300 m long beam ECE reference number: 30 very compact design combined illumination for near and far field must be installed in pairs as approved driving lamp (two-lane vehicles) Osram LED Lightbar SX500-SP, auxiliary headlamp with approval With the LEDriving Lightbar SX500-SP searchlight, intelligent lighting technology meets durability. With a service life of 5,000 hours, the LED auxiliary headlamp with certified approval ensures greater safety on the road in the long term. With an illuminance of one lux, the light beam range of the LED auxiliary headlamp is 360 metres with a beam angle of 8 degrees. This luminosity of the 18 high-performance LEDs benefits the driver especially on unlit roads and in difficult visibility conditions. Due to the intelligent reflector design, the LED bar for cars has a very high optical efficiency with uniform light distribution and reduced dazzling of oncoming traffic. But the LED driving lamp is not only impressive because of its 3900 lumen light output. It also gives the vehicle an improved off-road look. Spot Beam - Highly focused light beam ECE certification - ECE R112 (spotlight approval) Up to 270 m long beam ECE reference number: 30 Very compact design for illumination of far field must be installed in pairs as approved driving lamp (two-lane vehicles) Application noteFor further application information please refer to the product data sheet

Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light

LED fog lights in chrome with E-mark (therefore registration free mountable), Plug&Play solution for Jeep Wrangler JK 2007-2010, for numerous other Jeep/Dodge/Chrysler vehicles also suitable, different colours, price per piece. Plug&Play: 2007-2010 Jeep Wrangler 2009 Dodge Journey 2005-2008 Dodge Magnum 2006-2010 PT Cruiser Modification of the cable assignment necessary: 2011-2015 Jeep Wrangler 2010-2012 Dodge Journey 2011-2012 Jeep Grand Cherokee 2011-2012 Dodge Charger 2005 Chrysler 300 Technical data: Light output: 1,080 lumens (raw), 610 lumens (effective) Approval: ECE (Reg.10 and Reg.19), DOT (FMVSS 108) Operating voltage: 12 V Power consumption: 1.6 A @ 12 V Lens: UV-resistant, coated polycarbonate Housing: aluminium Colour: chrome  

Cannon Race CR-3S - 36 Watt - MULTI LED FOR MAXIMUM LIGHT OUTPUT High-Output LEDs with 4,200 Raw Lumens Per Pair Maximum Distance Spot Beam Reach 582m. (Pair) Clear and Selective Yellow Lens Options Compact Housing Design The Cannon Race Series 3 LED driving lights (CR-3) delivers the highest performing 36-watt compact driving light to hit the market. The CR-3 features a unique beam system which allows you to swap between an ultimate distance spot lens or a wider street-legal hybrid lens to fit your application.The CR-3 driving lights are available in 2 beam patterns in clear or yellow lens option that can be outfitted with whatever lens best suits your occasion.The Spot Beam lens was designed to provide the max amount of distance out of a light this size. We accomplished just that with our spot beam lens reaching out to a massive 582m. (Pair).Looking for more width vs distance out of your lights? Our Hybrid lens will do the job and not only exceed your expectations off-road but on-road as well. SAE/DOT & ECE certified, our hybrid lens can be utilized as a street-legal high beam that will make your headlights feel like they are not even on. Features: LEDs: 3 x 12W Housing Material: Aluminum Light Colour Temp: 5600 Kelvin Dimensions: 90/95/67mm Weight: 0.62 kg Voltage: 9-32V DC Amperage: 1.5A@24V DC - 3@12V DC Vibration Rating: 21.2 Grms Lens Material: Polycarbonate Certifications: CE, RoHS, ECE R112 Weatherproof Deutsch Connector

Cannon Race CR-3H - 36 Watt - MULTI LED HYBRID High-Output LEDs with 4,200 Raw Lumens Per Pair Maximum Distance Hybrid Beam Reach 320m. (Pair) Clear and Selective Yellow Lens Options Compact Housing Design The Cannon Race Series 3 LED driving lights (CR-3) delivers the highest performing 36-watt compact driving light to hit the market. The CR-3 features a unique beam system which allows you to swap between an ultimate distance spot lens or a wider street-legal hybrid lens to fit your application.The CR-3 driving lights are available in 2 beam patterns in clear or yellow lens option that can be outfitted with whatever lens best suits your occasion.The Hybrid Street Legal beam are SAE/DOT & ECE High-Beam certified. Not only are they the best in their class—they're also street-legal.Looking for a max distance spot beam instead? No problem. The CR-3's spot beam lens has got you covered. With a pair of these reaching out over 582m, the CR-3's are the furthest shining spot beam out of a light this size. Features: LEDs: 3 x 12W Housing Material: Aluminum Light Colour Temp: 5600 Kelvin Dimensions: 90/95/67mm Weight: 0.62 kg Voltage: 9-32V DC Amperage: 1.5A@24V DC - 3@12V DC Vibration Rating: 21.2 Grms Lens Material: Polycarbonate Certifications: CE, RoHS, ECE R112 Weatherproof Deutsch Connector

Cannon Race CR-4 - 40 Watt - FOG BEAM DRIVING LIGHT Max Performance Street Legal Fog Beam High-Output 10W LED's with 5,600 Raw Lumens /Pair SAE/DOT & ECE Approved Clear and Selective Yellow Lens Options Compact Housing Design The Cannon Race Series 4 LED (CR-4) delivers the highest performing street-legal fog light to hit the market. The CR-4 utilizes a truly unique lens that performs as well as it looks. With a super-crisp fog beam that reaches 137m long and 91m wide at 1 lux per pair, the CR-4 outperforms and outshines the competition both off and on the road.The CR-4 features a best-In-class Street-Legal Fog Beam that is pushed to the absolute limit of being SAE/DOT & ECE certified. Each pod is equipped with high-output 10W LEDs pumping out 2,800 Raw Lumens making the CR-4 capable of converting any night-time on-road and off-road adventure into daylight.Virtually unbreakable, the CR-4 uses a powerful polycarbonate bezel that won't crack, fade or corrode like traditional aluminum bezels. Ready for the most extreme environments the CR-4's are submersible and watertight with a IP68/69K housing that is capable of withstanding any adventure you can throw at it. LEDs: 4 x 10W Housing Material: aluminum Light Colour Temp: 5600 Kelvin Dimensions: 90/95/77mm Weight: 0.62 kg Voltage: 9-32V DC Amperage: 1.7A@24V DC - 3.33@12V DC Vibration Rating: 21.2 Grms Lens Material: Polycarbonate Certifications: CE, RoHS, ECE R112 Weatherproof Deutsch Connector

Vision-X Expora spotlights Explora by Vision X LED auxiliary lights are the next generation of driving lights developed by Vision X for Explora, which are brighter, better and easier than ever to illuminate the surroundings. The Explora series combines Vision X high quality with efficient LED diodes – to deliver driving light at an unbeatable price!   With the Explora by Vision X LED driving lights, you no longer have to choose between a long or wide light pattern. Explora has unique reflectors, which provide a hybrid light beam, with both length and width, without any dark spots.   Explora by Vision X is an LED driving light with outstanding performance.   All models of Explora are E-marked, with Vision X E-boost. With E-boost, you can selectively increase the power of the LED diodes, for additional brightness. But even without E-boost, the Vision X Explora delivers a powerful light with length and width.   The Vision X Explora series is offered as both LED driving lights and LED light bars. What they all have in common is that they are incredibly durable – with lamp housings made of high-quality aluminum and lenses made of almost unbreakable polycarbonate. The driving lights and light bars all have brackets in super strong and durable composite to resist corrosion. Explora by Vision X is of course also dust and water resistant, with full IP68/IP69K rating. The entire Explora series meets the standards ECE R10, ECE R148 and ECE R149.   Last but not least, Explora by Vision X are incredibly easy to mount and install. These LED driving lights have a built-in smart control unit, so they only need to be connected to a power source and setup with clearly color-coded cables to the correct function.   Vision X Explora LED driving lights include wiring, nuts and brackets for installation. The driving lights also include a cover, which is easily mounted/removed when needed.   Properties: Unique reflectors that provide both width and length of the light E-marked driving lights with E-boost for extra effect Tasteful white or orange position light High durability with IP68/IP69K rating General data:  Estimated LED life: 50,000 hours Colour temperature: 5700K Light pattern: hybrid (length + width) Voltage: DC11-32V Lens: polycarbonate Lamp housing: aircraft aluminium Bracket: composite IP class: IP68/IP69K Vibration class: 6.9 gRMS Operating temperature: from -40°C to +60°C Certifications: ECE R10, ECE R148, ECE R149, CE, UKCA, RoHS, REACH E-marked: Yes Daten  7 Zoll 120W  9 Zoll 200W Watt: 120W 200W E-amplifier: 80W 130W Raw lumen: 8160 lm 13600 lm Effective lumen: 6000 lm 9700 lm LED: 24 x 5W 40 x 5W Light length: 386 m @ 1 Lux (460 m in pair) 480 m @ 1 Lux (700 m im in pair) Light width: 40 m @ 1 Lux (45 m in pair) 50 m @ 1 Lux (60 m in pair) Power consumption: 5,8A @ 13,5V  9,6A @ 13,5V Width: 186 mm  221 mm Height: 186 mm 225 mm Depth: 85 mm 102 mm Weight: 2 kg 3 kg  

Vision-X Duralux worklight 30 W Compact worklight with 6 LEDs (5 W each), different light characteristics available, waterproof according to IP68 standard, 2,958 lumens (raw), 2,071 lumens (effective), aluminium housing. Technical data:Luminous flux: 2,958 lumens (raw), 2,071 lumens (effective).Waterproof: according to IP68 standardVoltage: 11-65 VPower consumption: 2.5 A @ 12 VMaterial: aluminium housing, polycarbonate front screenDimensions: 136.7x69x106.5 mmWeight (net): 950 grams Please select the desired illumination angle.

Nakatanenga Headlight Protection Grille for Land Rover Defender Nakatanenga headlight guards for Land Rover Defender 90/110/130 both protect your headlights from mechanical impact (e.g. branches) and also improve the appearance adding the classic look to your vehicle. In addition, with more and more high-value LED headlights being fitted, they also serve as an effective theft protection when useing the supplied theft inhibiting mounting kit. The lamp guards are produced locally from stainless steel and are powder coated in a very durable black coat which can be further painted in any colour (e.g. your vehicle colour). Included in delivery: two light guards, theft inhibiting mounting kit We have tested the guards with the following lights and can confirm that they don't cast any annoying shadows: OEM Land Rover headlights clear glas headlights Truck-Lite 7" LED headlights Nolden 7" LED headlights Further modals are being tested. The Nakatanenga headlight guards can be combined with the original light covers or our heritage-style covers.    

LED worklights from Vision-X - Xmitter Prime Xtreme The American manufacturer Vision-X has launched new LED worklights with 5W LED modules. Thanks to the more compact design of the modules, a significantly higher mounting density and thus an increased light range can be achieved with the same size lamp housing. In a proven design with a robust aluminium housing and scratch-resistant polycarbonate lens, the lights in the Xmitter Prime Low Profile XP series are ideally suited to the tough demands of rally and touring vehicles, but also to the requirements of the professional sector, such as forestry and emergency vehicles. The Xmitter Prome XP Low Profile series has a significantly lower height than the Xmitter Prime XP series, making it ideal for difficult mounting situations.All floodlights are available in 10°, 25°, 40°, 60° or 30°/65° illumination, mixed configurations are possible on request at no extra charge (please contact us by e-mail), as are white housings for marine applications. Water resistance to IP68 standard, improved thermal design, a voltage range of 10-42 V and dimmability via pulse width modulation round off the product features. The floodlights are available with a black or white housing.Product features: - robust die-cast aluminium housing - scratch-resistant polycarbonate lens - with 1-5 adjustable mounting feet - thermally optimised design for optimised heat dissipation - low power consumption (from 15 watts) - waterproof to IP68 standard - 9-32V multi-voltage capability - integrated thermal management - adjustable via optional dimmer using Prime Drive technology All floodlights available in 10°/25°/40°/60°/30/65° illumination variants. Item number LEDs Lumen Dimensions Electricity NAXIL-LPX-3xx 3 1479 lm 118x63x56 mm 1.3 A / 12V NAXIL-LPX-6xx 6 2958 lm 214x63x56 mm 2.6 A / 12V NAXIL-LPX-9xx 9 4437 lm 310x63x56 mm 3.9 A / 12V NAXIL-LPX-15xx 15 7395 lm 502x63x56 mm 6.3 A / 12V NAXIL-LPX-18xx 18 8874 lm 598x63x56 mm 7.5 A / 12V NAXIL-LPX-27xx 27 13311 lm 886x63x56 mm 11.3 A / 12V NAXIL-LPX-33xx 33 16269 lm 1093x63x56 mm 13.8 A / 12V NAXIL-LPX-36xx 36 17784 lm 1174x63x56 mm 15.0 A / 12V The headlights under item numbers "XIL-LPX910" and "XIL-LPX1810" have an E-mark.Please select the desired number of LEDs, the type of illumination and the housing colour.

Vision-X Optimus LED worklight LED worklight in 10 W technology, 860-3,440 lumen, 10-40 W, available in black, grey, chrome and white, IRIS reflector for extremely long range.