Lighting

LED signal lights Land Rover Defender up to MY2016: Indicators, front, amber Front LED indicators for Land Rover Defender in yellow, single. With E-mark.  Suitable for Land Rover Defender up to MY2016. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round indicator lights. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender. For these indicators you need our four-pole indicator relay, which also offers the feature of being able to set the indicator speed yourself.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!    

LED signal lights Land Rover Defender until MY2016: turn signal, front, white LED turn signal front for Land Rover Defender in white, single.With E-mark. Suitable for Land Rover Defender until MY2016 If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round signal lamps. As a rule, the original drill holes can be used. Please note: The screws must not be tightened too much (only hand-tight!), otherwise the plastic housing can get cracks. Water could penetrate the generally waterproof lights through these cracks.Only use a screwdriver and NOT a cordless screwdriver!

Land Rover Headlight Protectors Protection for the main headlights of the Land Rover Defender, made of Makrolon, original Land Rover part, without E-mark, delivery in pairs.

Fitting Kit Headlight for Land Rover Defender, stainless steel Fitting kit for one headlight for Land Rover Defender, consisting of stainless steel screws and anti-seize paste.

Fitting Kit Headlight Land Rover Defender Fitting kit for one headlight for Land Rover Defender, consisting of screws and small parts.

Spiral cable for work / reversing lights Spiral cable for almost every working & reversing light that can be connected quickly and easily to the cigarette lighter.

The four-pole relay for LED indicators prevents too fast blinking and allows to set its blink rate. It is replaced with the preinstalled relay of the Land Rover Defender 90/110/130.

Vision-X Pro Pod 2W universal luminaire As an interior light, for illuminating cupboard and storage compartments, under the awning, under the vehicle as a "rock light" - the possible uses for the compact Vision-X Pro Pod universal light are manifold!Thanks to the pleasantly diffuse light, it can be used in many places. Low power consumption (2 W) combined with high light output (140 lumens) means that the lamp can even run through the night without the vehicle's battery running out in the morning. The simple X-Mount attachment makes mounting easy - the high-quality aluminium housing can be mounted almost anywhere.

Vision-X Solstice 1100 mounting foot Mounting base for the LED spotlight Vision-X Solstice 1100.Suitable for standing and hanging mounting, scope of delivery: 1 piece

Vision-X MiniSolo Extreme LED worklight Worklight LED, 5 W, 354 lumen, optional 10° illumination, diameter only 43 mm, dimmable via pulse width modulation. Aluminium housing, waterproof according to IP68 standard, voltage: 9-35 V, current consumption: 0.42 A/12 V  

Lamp holder 7" Universal Lamp mounting pot 7" Universal, plastic, black.

27 LED Tent Light Starter Kit, 155 lumens, length: 30cm Operation with 12 V via plug or with 230 V with adapter (both included) 30 LEDs on a rigid, 30 cm long light strip for a light output of 155 lumens Includes clips, adhesive pads and adhesive tape for mounting 2 m cable for flexible positioning.

- can be used with 12 volts (plug) or 230 volts (mains adapter), both supplied - 90 LEDs on a flexible, 90 cm long light strip with an output of 294 lumens - comes with clips, sticky pads and tape for attachment - 2 metres long cord for flexible mounting

Vision-X Vortex CANBUS Integration Adapter 1 piece, H4 connectors, to operate the Vision-X Vortex 7" LED headlights in the Jeep Wrangler JK (from 2007). One piece is required per headlight. Delivery without the headlamp shown in the picture!

Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted suspended) - so that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting.The one-piece bracket is made entirely of stainless steel, glass bead blasted and black powder coated. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details.The bracket is equipped with four round Vision-X Utility Market Extreme LED worklights. A total luminous flux of 1,3804 lumens is generated from 7 LEDs per lamp (raw), the power consumption is only 2.9 A (at 12 V), the lights are multi-voltage capable (9-32 V). The two lights for mounting on the outer fastening points of the carrier ensure good visibility to the right and left of the vehicle with 60° illumination, while the two inner lights with 10° illumination provide a beam of light directed far to the front - in this way, as large an area as possible is illuminated in a practical manner and obstacles on the roadway as well as to the right and left of it can be recognized (e.g. approaching game). Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation we recommend the Aquasignal cable grommet for the roof (so the light bar remains easily removable) as well as our power distributor with fuse holder. Please note: A cable set is NOT included in the scope of delivery!!! The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:

Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle even when the lamps are mounted upright - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting.The one-piece bracket is made entirely of stainless steel, glass bead blasted and black powder coated. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyes for attaching cable ties round off the well thought-out details.The bracket is equipped with two Vision-X LPX-910 LED spotlights, which have an E-mark. A total luminous flux of 8,874 lumens is generated from nine 9 LEDs per lamp (raw), the power consumption is only 2.1 A (at 12 V), the lights are multi-voltage capable (9-32 V). The luminaires have a narrow, wide-range illumination towards the front. The lamps can be mounted upright or suspended.Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation, we recommend the Aquasignal cable grommet for the roof (so the light bar remains easily removable) as well as our power distributor with fuse holder. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:

Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted suspended) - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting. The one-piece bracket is made entirely of stainless steel and powder-coated in black. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details. The bracket is equipped with four round Vision-X Cannon 25 W LED spotlights, which have an E-mark. A total luminous flux of 10,000 lumens is generated from one 25 W Luminus LED per lamp (raw), the power consumption is only 2.1 A (at 12 V), the lights are multi-voltage capable (9-32 V). All luminaires have a narrow, far-reaching illumination to the front. If you require a different light characteristic (e.g. wide beam) or a different light colour (e.g. yellow for fog or blue for snow), please order the optional add-on filters. Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation, we recommend the Aquasignal cable gland for the roof (so that the light bar remains easily removable) as well as our power distributor with fuse holder. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:

Compact LED worklight with 60° illumination, draws only 1.0 A with an output of 2,000 lumens (raw), waterproof to IP69k standard. Technical details:components: 4 LED with 3 W eachpower input: 12 W / 1.0 Aoperating voltage: 9-32 Villumination: 60° (flood)flux density (raw): 2000 lumensflux density (actual): 950 lumenslight output: 1 lux in 60 metres distancewaterproof: IP69k standarddimensions: (width x height x depth): 70x92x50 mmconnector: Deutsch plug The Dura Mini compact worklight is ideal for consticted mouting spaces and can be fitted to rear bumpers, below roof racks or side body panels. Its 60° light cone illuminates your working environment very well, while the aluminium die casting housing and the hightest IP-class waterproof standard guarantee long-lasting, troublefree use under the toughest conditions. Nakatanenga roof rail holder NOT included - please order separately!

NOLDEN Daytime running lights Premium Line Classic Our NOLDEN day driving light set consists of 2 lamps, control unit, wiring loom. Comes with fixings and fitting instructions.

Vision-X Commercial Truck Horizon LED Worklights Commercial Truck Horizon is a range of LED worklights that impressively demonstrates Vision-X's technological edge. 9, 12 or 18 LEDs in modern 5 Watt technology emit between 4,437 and 8,874 lumens per headlamp - and are thus ideally suited for use on off-roaders, on machines but also for illuminating stationary applications.Product features: robust die-cast aluminium housing scratch-resistant polycarbonate lens 360° adjustable bracket thermally optimised housing for optimised heat dissipation low power consumption (between 45 and 90 watts) waterproof according to IP68 standard 9-32 V multi-voltage capability integrated thermal management adjustable via Prime Drive technology with optional dimmer Technical data:Article number Number of LEDs Lumen Illumination Dimensions Power consumptionNACTL-HPX-910, with E-mark 9 4,437 lm 10° 360x79x60 mm 3.75 A / 12 VNACTL-HPX-940 9 4,437 lm 40° 360x79x60 mm 3.75 A / 12 VNACTL-HPX-1210, with E-mark 12 5,916 lm 10° 360x79x60 mm 5 A / 12 VNACTL-HPX-1240 12 5,916 lm 40° 360x79x60 mm 5 A / 12 VNACTL-HPX-1810, with E-mark 18 8,874 lm 10° 617x79x60 mm 7.5 A / 12 VNACTL-HPX-1840 18 8,874 lm 40° 617x79x60 mm 7.5 A / 12 VWiring is included in delivery (switch, relay, fuse)Please select the desired model.

NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and insulating strip for Toyota HZJ. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Toyota HZJ / "Buschtaxi". Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, Jeep Wrangler JK/TJ/CJ, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1,880 lm / 2,400 lm lumens measured: 1,550 lm / 1,700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version.

Strong bracket for professional applications Are you looking for a reliable solution to securely and flexibly mount your worklights? Our magnetic base for square worklights offers you just that! With an extremely strong magnet, this base ensures a firm hold, even in demanding applications.   Thanks to the innovative suction cup feet, the surface to which the magnetic base is attached is protected from scratches or damage. This means you can attach and remove your worklights quickly, easily and without risk

Our LED licence plate light for Land Rover Defender 90/110/130 looks like the original item with all the benefits of LED technology: whiter and brighter than halogen bulbs little current drain (only 0.5 W), generates little heat insensitive to vibrations, especially interesting for diesel powered cars! superior longevity large voltage range - 9-33 V The light is E-marked for legal use (corresponding to ECE regulation no. 4). It's water and dustresistant to IP67 and is fitted using the existing M5 screws. All fittign material is supplied, so fitting only takes a few minutes.

LED main headlights with E-mark, 5.75’ diameter (146mm), with low beam, high beam and position light The arguments in favour of LED headlights are convincing: Robustness - LEDs, unlike halogen or xenon headlights, are insensitive to strong vibrations and impacts, which are part of everyday life when used on off-roaders or machines - their benefits: No more replacing ‘bulbs’ - the LEDs have an expected service life of 50,000 hours. This corresponds to a service life of over 17 years, assuming 8 hours of operation per day.   low power consumption - regular headlights require 55 watts per headlight for low beam, 60 watts for high beam, and often even 100 watt bulbs are used. Not only is this not authorised, it also overloads the standard wiring and light switches. LED headlights, on the other hand, only require 35 watts (at 14 V voltage supplied by an alternator) per headlight.   Higher efficiency - LED headlights not only require less power than halogen headlights, they also provide more light.   higher quality of light - the spectral distribution of the light emitted by LED headlights is more similar to sunlight than other light sources - it is perceived by the human eye as less tiring. This reduces J.W.Speaker 8630 - LED headlamp fatigue and the resulting risks during long journeys in the dark.   more environmentally friendly - conventional halogen or xenon light sources produce large quantities of environmental toxins such as mercury, lead or sodium during their manufacture. This does not occur in the production of LED headlights - and they can also be fully recycled.   Reduced downtimes - especially in fleet or commercial use, ‘time is money’ - if a vehicle or machine is at a standstill, the costs or loss of earnings are many times higher than the material value of the components to be replaced. This is where a maintenance-free LED headlight quickly pays for itself.   Less interference radiation - xenon headlights in particular, with their high-voltage components, cause large amounts of electromagnetic interference (EMI). As vehicle systems become increasingly complex, this can lead to faults that can result in lengthy troubleshooting and downtime. These do not occur with LEDs - and why should you voluntarily expose yourself to unnecessary ‘electro-smog’? The low interference radiation is documented by compliance with the strict US military standard 461E.     Price per piece.    

Practical mounting set for J.W. Speaker 8700/8700EVO Mounting set for installing a J.W.Speaker 8700 or 8700 Evo LED headlight, for single-point mounting, chrome-coloured.

Adaptor Plate for Brake- and Fog-Lights -  Land Rover Defender previous to Model year 1998 This adaptor (1 piece) allows you to mount round breaklights and fog lights to older Defender models (previous to MY1998). This plate is compatible with your standard lights and our own LED lights.

More Light, Better Visibility: The Interior Light for Your Land Rover Defender! Sound familiar? You're out and about with your Landy, it's getting dusky or it's already pitch black, and you're looking for something inside. The original interior lighting in your Defender is often more of a glimmer than a real light that provides orientation. That ends now! With our high-quality interior light, you finally bring the brightness into your Defender that you deserve. Whether you want to read maps in the dark, sort your gear, or simply create a pleasant atmosphere – this light makes the difference. Why You Should Opt for This Interior Light: Significantly Improved Light Output: Experience a noticeably brighter interior compared to the often undersized standard lighting. Optimal Illumination: Ensures better light distribution, so even dark corners of your Defender are better lit. Easy Orientation: Find tools, equipment, or that life-saving chocolate bar faster and without a long search. Pleasant Ambiance: Creates a functional and simultaneously pleasant lighting situation in your iconic vehicle. Robust Construction: Made for demanding use in the Defender – it withstands the vibrations and conditions your Landy masters. Perfect Fit: Designed to integrate well into your Defender's interior and to be easily exchanged for the original part. (Note: Please check specific model compatibility and installation instructions if applicable.) Put an End to Dim Lighting! This interior light is a small upgrade with a big impact. It not only increases the practical utility of your Defender in everyday life and on adventures but also provides an extra plus in comfort. Equip your loyal companion now with lighting that does justice to its character. No more fumbling in the dark – treat yourself to clear visibility inside your Land Rover Defender! Interior light for all Land Rover Defender 90/110/130 models, replacement for the original part between the sun visors, also suitable as lighting for the second row of seats in conjunction with the roof console. This is a high-quality genuine Land Rover OEM part, not an inferior reproduction. You can find a suitable replacement festoon bulb HERE in the shop. Do you have questions about compatibility or installation? We at Nakatanenga are, as always, here to help and advise you!