MagCode PowerSystem and PowerSystem Pro plugs
Magnetic plug system for 12V consisting of PowerPort connection and PowerClip plug - waterproof and dustproof - therefore ideal for off-roaders! Magnets in both the PowerPort (current transmitter) and the PowerClip (receiver) contact the two components and also have a switch function. Therefore, the flat contacts of the PowerPort are only energised when the movable magnetic plate in the transmitter is switched by a suitable pick-up. Other metallic objects or magnets cannot trigger the switching process. Thus, a MagCode PowerSystem is 100% short-circuit-proof. A hinged PowerPort cover is available as an option. Here you can also find our advantage bundle, consisting of clip, port and cover. Here you can also find the MagCode cover for your Power System or Power System Pro separately. The MagCode system can be used for a wide range of applications where safe but easily detachable power connections are required - whether it's the cool box in the off-roader or the battery charger - but also headlights on the roof rack or the power supply in the roof tent can be solved in this elegant and contemporary way. Technical data: Locking: magneticPowerPower connection: 6.3 mm flat contact for plugging or solderingPowerClip connection: Screw connection, max. 2.5 mm² cableMounting diameter PowerPort: 28 mm (M28)PowerClip projection: 21.5 mmVoltage range: 12 Volt or 24 VoltLoad capacity: max. 15 amps (at +70°C)Port cable length: 72 mm Dust and waterproof : PowerPort front (built-in): IP5K9KPowerPort connection side: IP5K0PowerClip (not connected): IP40PowerClip (on port): IP42Switching cycles (without load): over 10,000Switching cycles (under load): 4,000Please note the instructions for outdoor use The PowerSystem Pro, on the other hand, has a bayonet lock in addition to the magnetic lock, as well as a load capacity of 25 A instead of 15 A. Both systems are available for 12 V and 24 V. A connection cable for the MagCode PowerClip is not included in the order. Please select the desired variant.
Prices incl. VAT;
Mag PowerSystem Pro 12V Bundle
Complete package consisting of a PowerPort Pro (socket), a PowerClip Pro (plug) and a PowerPort cover, for 12 V. Magnets in both the PowerPort (current transmitter) and the PowerClip (receiver) contact the two components and also have a switch function. Therefore, the flat contacts of the PowerPort are only energised when the movable magnet plate in the encoder is switched by a suitable pick-up. Other metallic objects or magnets cannot trigger the switching process. Thus, a MagCode Pro PowerSystem is 100% short-circuit-proof. The MagCode Pro system can be used for a variety of applications where safe but easily detachable power connections are required - whether it is the cool box in the off-roader or the battery charger - but also headlights on the roof rack or the power supply in the roof tent can be solved in this elegant and contemporary way. Technical data: Locking: magnetic and mechanicalPowerPort connection: 6.3 mm flat contact for plugging or solderingPowerClip connection: Screw connection, max. 2.5 mm² cablePowerPort installation diameter: 28 mm (M28)PowerClip projection: 21.5 mmVoltage range: 12 Volt (also available for 24V)Load capacity: max. 25 amps (at +70°C)Port cable length: 72 mm Dust and waterproof : PowerPort front (built-in): IP5K9KPowerPort connection side: IP5K0PowerClip (not connected): IP40PowerClip (on port): IP42Switching cycles (without load): over 10,000Switching cycles (under load): 4,000Please note the instructions for outdoor use
Prices incl. VAT;
Nakatanenga Double Socket USB and USB C Socket incl. Spacer Ring, quickcharge 3 und 4
Nakatanenga Double Socket USB and USB C Socket incl. Spacer USB socket type A and C, round, suitable for 12V and 24VInput: DC 12V-24V,Output: Type A (QC3.0 port): 3.6-12V / max. 36WOutput: Type C (QC4.0 port): 5V-20V / max. 60WWith the output type C can also charge laptops of any kind (slow charging)Hole diameter hole: 29mmPlease note the installation depth if you want to install the USB socket e.g. in a parking heater console or a valuables compartment. As the USB socket is slightly longer than a normal 12 volt socket due to the Quickcharge, please use the spacer supplied.Please note: As soon as power is applied, the socket lights up permanently with blue feedback lighting.
Prices incl. VAT;
Repair kit for Land Rover Defender TD4 2.4 and TD5 glow plug connectors
Glow plug connector Land Rover Defender If the diesel has difficulty getting going when starting from cold, and if it nails and smokes particularly badly, this is often due to the glow plugs. Before replacing the plugs, however, you should first check the condition of the cables and plugs. Often, the problem is simply that cables and plugs are exposed through porous plastic sheathing and the electrical contacts are suffering. As a rule, the service life of the plugs far exceeds that of the cable and plug connections, because cables and plugs and their insulation are naturally much more exposed to mechanical and weather-related influences. With our glow plug connector repair kits, Defender with Td5 and Td4 2.4l engines can be very easily retrofitted in case of problems with cables or connectors. This is also recommended if the glow plug set is being replaced anyway. The advantage of the repair kit is that the next time a problem occurs, it is not necessary to replace the entire wiring harness at great expense; instead, it is sufficient to replace the plug and cable up to the crimp connection. This saves time and money and is also no problem for hobby screwdrivers. ATTENTION: Does NOT fit for Tdi and Td4 2,2l. Scope of delivery: 4 plugs
Prices incl. VAT;
Connector / mating connector for Land Rover Defender switch OEM Style
Connector / mating connector for Land Rover Defender switch OEM Style Suitable connector / mating connector for switch YUG000540LNF / YUF500150LNF / YUG102440 or our OEM style switches Scope of delivery: connector incl. contacts As spare part for our switches: Switches for Land Rover Defender & Discovery Switch with bezel for Land Rover Defender & Discovery Land Rover Defender OEM switch auxiliary headlights
Prices incl. VAT;
▷ USB socket with On/Off switch, PD Technology
Nakatanenga Double Socket USB and USB C Socket incl. Spacer USB socket type A and C, round, suitable for 12V and 24VInput: DC 12V-24V,Output: Type A (QC3.0 port): 3.6-12V / max. 36WOutput: Type C (QC4.0 port): 5V-20V / max. 60WWith the output type C can also charge laptops of any kind (slow charging)Hole diameter hole: 29mmPlease note the installation depth if you want to install the USB socket e.g. in a parking heater console or a valuables compartment. As the USB socket is slightly longer than a normal 12 volt socket due to the Quickcharge, please use the spacer supplied. Socket has an ON/OFF switch and PD technology.
Prices incl. VAT;
USB socket for Land Rover Defender Td5, Td4, Tdci
USB socket suitable for Land Rover switch openings - USB 3.0 The Land Rover USB socket fits into the factory switch openings on the Defender Td5 (2002-2006) & Tdci/Td4 (2007-2016). The Land Rover USB socket is designed to complement the original Land Rover switch design.To ensure your Defender dashboard maintains a factory appearance, the outlet is equipped with green backlighting. Each Land Rover USB comes with a mini harness to allow for easy two-wire installation.A multi-plug plugs directly into the back of the USB socket for easy removal. The included mini harness comes with a pre-wired inline fuse, so installation requires nothing more than the ignition supply and ground/earth connections. The Land Rover USB socket also fits into the openings in the Freelander 1, Discovery 2 & 'Soft-Dash' Classic Range Rover. Puma Pod II and all Puma double DIN console switch relocation panels are suitable. USB 3.0 Scope of delivery: 1pc USB socket1pcs Mounting Instructions Translated with www.DeepL.com/Translator (free version)
Prices incl. VAT;
Wiper relay for Land Rover Defender
Windscreen wiper relay - Land Rover Defender Replacement relay for the windscreen wiper of the Land Rover Defender. Suitable for various model years, ensures reliable control of the wiper intervals. Simple replacement, close to OEM design.
Prices incl. VAT;
Nakatanenga socket 12 V
Built-in socket outlet 12 V, loadable up to 15 A, with cover cap The socket can either be installed directly (dashboard, cubby box, cabinet, etc.) or can be mounted in one of the surface-mounted housings (single, double, triple). Ensure that there is sufficient fuse protection! The unit can also be used in the standardised 29 mm installation opening of the cigarette lighter in many vehicles. The delivery includes the lock nut required for mounting as well as a cover cap.
Prices incl. VAT;
MagCode cover Power System / Power System Pro
Protective cover for MagCode PowerPort suitable for Power System and PowerSystem Pro, 12 and 24 V. Protects the PowerPort socket when not in use, very easy to fit.
Prices incl. VAT;
Quick connector (Anderson Style)
Quick connector 2-pole 12/24V Quick connector (Anderson style) for 12/24V, 2-poleThe connector is used to lay the battery connections out of the battery box in order to be able to connect power consumers quickly, conveniently and without the risk of a short circuit.With 12V up to max 50A loadable / with 24V up to max. 25Amax. 5mm cable diameterLength: 5 cm ; Width: 3,5 cm ; Height: 1,5 cmThe quick connector can also be integrated into our mounting panel EB3QC.
Prices incl. VAT;
Electrical plug as quick connector
Electrical plug as quick connector Electrical plug in two sizes for 12/24V, 2-pole, as quick connector for winches, jumper cables, etc. The plug is used to lay the battery connections out of the battery box in order to be able to connect the above-mentioned power consumers quickly, conveniently and without the risk of a short circuit.Connection data:Plug small: max. 50 Amp. - max. 5 mm cable diameterLarge plug: max. 175 Amp. - max. 10 mm cable diameterDimensions:Large = length: 8 cm ; width: 5.5 cm ; height: 2.5 cmSmall = length: 5 cm ; width: 3.5 cm ; height: 1.5 cmScope of delivery:Plug (can be used universally as plug or socket).2 contactsProtective cap
Prices incl. VAT;
Cable for small independent mobile heating system with plug for cigarette lighter
Cable with plug for cigarette lighter Suitable for our small mobile parking heater. 4 m cable Plug for cigarette lighter Please note: The plug can be loaded up to 16 A. The socket MUST also be rated up to 16 A.
Prices incl. VAT;
Alan PL259/6 connector, for RG58 coaxial cable
Alan PL259/6 plug, for RG58 coaxial cable PL259/6 plug, double pack, for assembling RG58 antenna cables.Required for the Alan ML130 and Alan ML145 magnetic antenna.
Prices incl. VAT;
BlueSea Dual USB Built-in Socket 4.8A (round)
BlueSea Dual USB built-in socket 4.8A (round) USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12V and 24V on-board voltage and has a splash-proof cover.Delivery without further accessories, if shown, these are for illustration purposes only.
Prices incl. VAT;
Mounting panel with 12V socket and quick connector (Anderson style)
Panel with 12V socket and quick connector Mounting panel with 12V socket and quick connector (Anderson style) 12V socket loadable up to 15A Quick connector (Anderson style) loadable up to 50A Optional quick connector as replacement and / or mating connector available separately here: QCGRY-S
Prices incl. VAT;
12V plug, waterproof, 10A
Ideal for car and camper - 12V plug for cigarette lighter 12 V plug, suitable for common cigarette lighters and 12 V sockets, can be loaded up to 10 A, interlocks with the matching socket NABS1011. Product features: Waterproof sealing ring on the shaft to prevent moisture from entering the socket. Status LED Integrated strain relief 10 A fuse built in designed to withstand heavy moisture and vibration "Twist-lock" system for secure locking with the NABS1011 socket outlet Seal at cable outlet (4mm diameter) Max. Voltage: 15 V Max. Current: 10 A Scope of delivery: 1 plug
Prices incl. VAT;
Twin USB 4.2A Installation Socket
Twin USB 4.2A installation socket, 2x USB, with 2x 2.1 A charge current, protective cover. This socket can bei either fitted directly (dash panel, cubby box, cupboard, etc.) or into a mounting frame (single, double, triple). Please ensure adequate fuse protection! Can also be used in the standard 29 mm cigarette lighter recess as used on many vehicles. Comes with lock nut and cover.
Prices incl. VAT;
Accessories for OptiMATE solar battery charging system
Accessories for OptiMATE solar battery charging systems Product Informations Extension cable with a length of 4.6 m with SAE connection Length = 15 ft / 460 cm 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures SAE built-in socket Length = 100 cm / 40 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing SAE built-in socket (short cable) Length = 15 cm / 6 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing Plug with rotary adapter, fits on Ø 12 mm MOTORCYCLE / DIN or Ø 21 mm AUTO sockets, with 2-pin SAE connection according to industry standard Length = 20 ″ / 50 cm Industry standard 2-pin SAE connector 8 A fuse (in the plug) Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures With rubber cable gasket for OptiMate heavy-duty SAE connection. Y splitter, SAE IN to 2 x SAE OUTBranching your permanent battery supply line, creation of SAE outputs. Length = 12 ″ / 30 cm Industry standard 2-pin SAE connector. Max. Cable values: 5 Amp -20 ° C / -4 ° F use at very low temperatures With line seals and sealing end caps for OptiMATE heavy-duty SAE connections.
Prices incl. VAT;
MIDI Strip Fuse 125A, 2 pcs.
MIDI strip fuse 125 A - suitable for many MIDI fuse holders These MIDI strip fuses with a rated current of 125 amps are ideal for use in 12V and 24V vehicle electrical systems - for example in cars or motorhomes. Among other things, they fit perfectly in our NABS7720 fuse holder, but are also compatible with many other holders that have a standardised MIDI socket.With a load capacity of 125 A, these fuses offer optimum protection for power distributors that can be loaded with up to 100 A. They ensure reliable overcurrent protection and help to prevent expensive damage to electronics and cables.Suitable for applications with a maximum operating voltage of 32 volts.Scope of delivery:2 MIDI strip fuses, 125 A each
Prices incl. VAT;
BlueSea Below deck panel, waterproof
Mounting panel with switch, double USB socket and 12 V socket.Pre-wired, 12 V socket up to 15 A loadable, USB socket up to 2.1 A loadable. Simple connection with only two cables! Waterproof Dimensions see drawing.
Prices incl. VAT;
12V socket, waterproof, 15A
Waterproof 12V socket outlet 12 V socket with rectangualar mounting plate and waterproof cover. Up to 15 A current, locks with the suitable plug NABS1010. 12 V socket, waterproof, 15 A Product features: waterproof cover to prevent water ingress included strain relief for severe humidity and vibratios can be mounted with or without supplied mounting plate large contact area for best power transmission "Twist-Lock" system for secure locking with NABS1010 plug cable-side seal (4 mm diameter) max. voltage: 15 V max. current: 15 A included in delivery: 1 socket
Prices incl. VAT;
BlueSea voltage indicator with OLED display
BlueSea voltage indicator with OLED display The compact and practical voltage indicator for 12 V and 24 V systems is equipped with a high-quality OLED display, has reverse polarity protection and is waterproof and dustproof according to IP66 standard.
Prices incl. VAT;
BlueSea ANL fuse, 750A, max. 32V
BlueSea ANL fuse, 750A, max. 32V Specification: Silver plated plug blades for corrosion resistance. Visible indication of blown condition 6,000 ampere interrupting capacity (AIC) meets ABYC requirements for DC main circuit protection on large battery banks For use with ANL fuse block holders 5/16" (M8) mounting holes 22mm x 81mm (7/8" x 3 3/16") Depth varies depending on power rating Suitable for DC systems between 6V and 80V Suitable for AC systems up to 32 V Blue Sea part number 5163, 8-25163 Cooper Bussman ANL-750 Eaton ANL-750 Battery Booster Starter Pack Main Fuse UL recognised, CSA certified, 35-750 A @ 80 Vdc, IR 2700 A, Guide JFHR2, file E56412, Class 1422-30, File 53787,
Prices incl. VAT;
NATO socket / plug
NATO socket / plug NATO plugs and sockets with the test mark VG 96917 are suitable for a safe power supply and for jump-starting military vehicles, fire engines and rescue vehicles, but also excellent for off-road use. This plug system can be used in the 12 VDC or 24 VDC on-board network. The maximum current carrying capacity is 300A continuous load (peak currents significantly higher). Another practical application is the external feed-in of direct current. Here, a DC supply is possible without opening battery covers or flaps. The NATO plugs / sockets are protected against polarity reversal. Delivery includes contacts.NATO socket, 2-pole12/24 V, suitable for 50 mm²NATO stock no. 5935-12-308-5019, VG 96917 NATO plug, 2-pole12/24 V, suitable for 50 mm²VG 96917 Please also note our bundle with price advantage!
Prices incl. VAT;
Dual USB flush-mounting socket with cover
Dual USB Built-in Socket with Cover Hight-quality flush-mounting socket with splash-proof lid, providing 2 USB 2.0 sockets to power mobile devices @ 5 V/2.1 A. Technical details: input voltage: 12 V output volrage: 5 V +-5% max. output current: 2.1 A internal overheat control made form non-corroding material lid protacts against water and dust not suitable for data connections Very well suited to power mordern devices like e.g. Apple iPhone, iPad, smartphones, tablet PC, Garmin GPS, TomTom navigation device, Blackberry, etc. Can either be fitted with or without rectangular base plate. Without, it fits the standard cigarett lighter socket, e.g. on Land Rover Defenders
Prices incl. VAT;
7-pin E-kit with multi-plug Defender Td5/Td4
E-approved for Defender Td5 / Td4 7-pin electrical kit with multi-plug This 7-pin e-kit was specially developed for the Land Rover Defender Td5 and Td4 and enables simple, reliable connection of trailers or carriers with 12V lighting. The multi-plug connection ensures quick and clean integration into the original vehicle electrical system Suitable for all Defenders from MY99 up to and including Td4
Prices incl. VAT;
Nakatanenga substructure/structure holder
Under-cabinet/on-cabinet holder simple, optionally for 12V socket, USB socket or voltmeter
Prices incl. VAT;
BlueSea Dual USB Built-in Socket for Carling Cut-outs
BlueSea Dual USB built-in socket for Carling cut-outs USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12 V and 24 V on-board voltage and has a splash-proof cover.The socket in the form of the well-known Carlingtech Contura switches can be installed individually (please refer to the dimensioned drawing for the exact dimensions), in the Carling installation frames or in various consoles, such as: on the A-pillar in the Jeep Wrangler JK in the universal dashboard consoleSupplied without other accessories, if shown these are for illustration purposes only.
Prices incl. VAT;
Mounting bracket for 12V and USB sockets
Mounting bracket for 12V and USB socket outlets Mounting bracket for 12V and USB socket outletsThe mounting bracket was specially developed for the simple and safe installation of the waterproof 12V socket outlet NABS1011 and the double USB socket outlet NABS1016. It enables flexible installation of the sockets, depending on individual requirements and circumstances.Thanks to its sophisticated design, the bracket ensures stable and wobble-free mounting of the sockets. It is ideal for use in vehicles or other outdoor applications where a reliable power supply is required.The holder is made of robust material for a long service life - even under demanding conditions. The supplied mounting material enables quick and easy installation.Scope of delivery: 1x mounting bracket Mounting material Use this bracket to safely and professionally integrate your 12V and USB sockets and supply your devices with power at all times.
Prices incl. VAT;
Nakatanenga superstructure housing
Nakatanenga surface-mounted housing Surface-mounted housing, optionally for 12V socket, USB socket or voltmeter, optionally for one, two or three units.Installation panels and devices are for illustration purposes only and are not included in the scope of delivery.
Prices incl. VAT;
Nakatanenga installation panel
Installation panel - easy installation for 12V sockets, USB chargers or voltmeters This practical installation panel enables the neat and tidy integration of built-in devices such as 12V sockets, USB charging sockets or voltage displays (voltmeters) in vehicles, boats, motorhomes or other applications. The cover ensures a tidy appearance and makes installation considerably easier.Depending on your requirements, the cover is available in different versions - suitable for one, two or three devices. This means you can put together your own customised configuration with complete flexibility.Installation is quick and easy - ideal for retrofitting or conversions.Note: The devices and consoles shown are for illustrative purposes only and are not included in the scope of delivery.
Prices incl. VAT;