Central electrics TEXU400 - Fuse holder, busbars
TEXU400 central electrics for touring vehicles and boats The TEXU400 revolutionises electrical installation. It combines various components that previously had to be purchased individually in a round housing that optimises the use of space and the number of possible connections in the smallest possible space. The special arrangement, which is ONLY available in the TEXU400, enables system integration with groundbreakingly low effort. This results in drastic savings in costs as well as time and space, while at the same time reducing sources of error and providing the highest level of application comfort after installation. It also requires considerably less installation space in a touring vehicle or boat. Extensive electrical systems can thus be planned in a smaller space and the space gained can be used for other purposes. Connection of up to 4 battery banks 11 high-current and 4 standard consumers Plus rail for on-board batteries and consumers Screw terminals and fuses 2x MEGA / AMG fuse max. 400 A 9x MIDI / AMI fuse max. 170 A 4x ATO / ATC / ATP fuse max. 30 A 1:1 ground distributionPut an end to insufficient ground distributions! With the TEXU400, a negative connection is also provided for each positive connection. Simple integration of a summation current measurementThe factory-fitted Sunt bridge between the negative busbars can be easily removed by means of screws and replaced by a plastic bar included in the scope of delivery to enable quick and uncomplicated integration of a measuring shunt. MEGA fuse with double inputWhere cable lugs used to be stacked or other suboptimal constructions had to be devised on a case-by-case basis (e.g. in the case of split cables of powerful inverters), there is now a professional solution: a MEGA fuse point with max. 400 A and double screw connection, ensures professional and safe installation of such components. Ignition-protected according to ISO 8846The UFO is ignition-protected according to ISO 8846 with the integrated, all-round bar with seal. It is therefore also approved for installation in the engine compartment. LED failure check with fibre optics Immediate diagnosis. Fibre-optic cables light up the LED failure check directly at the inscription of the circuits in the closed cover. You can save yourself the trouble of removing fuses and searching upside down for faults in confined spaces! A prefabricated labelling set with partly customisable content is included in the scope of delivery of the TEXU400. Space for spare fusesThe TEXU400 contains additional slots for spare fuses (1x MEGA, 2x MIDI, 2x ATO/ATC/ATP)Convenient opening and closingThe knob centrally located on the enclosure cover makes it easy to open and close the cover and even allows one-handed operation in confined spaces. Please note: As individual electrical installations contain different components that must be suitably fused, a prefabricated fuse set is NOT included directly in the scope of delivery of the TEXU400.
Prices incl. VAT;
BlueSea MIDI strip fuse 150A
Blue Sea BS 5258 AMI/MIDI fuse 150A Is ideal for electronic equipment where superfast fuses are required. Main features: Superfast fuses ideal for electronic equipment. Classic circuit breakers for automotive and truck fuse protection Tin-plated connectors for corrosion resistance Visible indication of a blown fuse Packaging unit of 2 pieces Technical data: Maximum current consumption: 150A Maximum voltage: 32V DC Breaking capacity: 5000A @ 16V DC 2000A @ 32V DC Battery connection bolt with torque limitation: 4.52 Nm Minimum temperature: -40 °C maximum temperature: 125 °C Material: tin-plated copper CDA 110/UNS11000 MIDI strip fuse 100 A, 2 pieces, e.g. for fuse holder NABS7720, but also for other holders with MIDI sockets. With 125 A, the fuses are ideally suited for protecting our TEXU400 central electrics, which may be loaded with max. 400 A. Suitable for applications up to max. 32 V. Scope of delivery: 2 pieces
Prices incl. VAT;
MIDI strip fuse 100 A
Blue Sea BS 5256 AMI/MIDI fuse 100A Is ideal for electronic equipment where superfast fuses are required. Main features: Superfast fuses ideal for electronic equipment. Classic miniature circuit breakers for automotive and truck fuse protection Tin-plated connectors for corrosion resistance Visible indication of a blown fuse Packaging unit of 2 pieces Technical data: Maximum current consumption: 100A Maximum voltage: 32V DC Breaking capacity: 5000A @ 16V DC 2000A @ 32V DC Battery connection bolt with torque limitation: 4.52 Nm Minimum temperature: -40 °C maximum temperature: 125 °C Material: tin-plated copper CDA 110/UNS11000 MIDI strip fuse 100 A, 2 pieces, e.g. for fuse holder NABS7720, but also for other holders with MIDI sockets. With 125 A, the fuses are ideally suited for protecting our TEXU400 central electrics, which may be loaded with max. 400 A. Suitable for applications up to max. 32 V. Scope of delivery: 2 pieces
Prices incl. VAT;
Outdoor socket outlet 2-pole
Compact, robust, versatile 2-pin socket outlet 6-42 V, 16 A This 2-pin socket outlet is ideal for use in low-voltage systems from 6 to 42 volts - whether in vehicle construction, agricultural machinery, trailers or workshop applications. With a load capacity of up to 16 amps, it is reliable and versatile. Whether as a spare part or for individual conversions: This socket offers a safe, long-lasting connection for many applications in vehicles and beyond. 2-pin plug connectionIn a robust aluminum housingSuitable for outdoor applications6-42 V, max. 16 AComplies with DIN 14690
Prices incl. VAT;
Adapter for connecting 2 Alan PL259/6 plugs
Adapter for Connecting Two Alan PL259/6 Connectors This adapter allows easy and secure connection of two Alan PL259/6 connectors. Ideal for use in radio communications, antenna installations, or for extending coaxial cables.Made from durable materials to ensure reliable signal transmission and long-lasting performance. Features: Compatible with Alan PL259/6 connectors Compact design Easy to use Perfect for radio and antenna applications
Prices incl. VAT;
Outdoor plug 2-pole
2-pole plug connection to DIN 14690 - Robust, reliable, versatile This high-quality 2-pole plug connection in a robust aluminum housing is specially designed for demanding applications in the low-voltage range (6-42 V). With a load capacity of up to 16 amps and the standardized design in accordance with DIN 14690, it offers a secure and durable connection - even under harsh operating conditions. This plug connection is the first choice for anyone looking for a durable, standard-compliant solution for mobile power supplies and device connections. 2-pin plug connectionin a robust aluminum housingSuitable for outdoor applications6-42 V, max. 16 AComplies with DIN 14690
Prices incl. VAT;