Skip to main content
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644

Road Springs

Filter
Set Parabolic Springs incl. Shock Absorber for Land Rover Series II, IIA and III 88" and 109" Front
Set of parabolic springs incl. dampers for Land Rover Series II, IIA and III 88" and 109".
Parabolic springs for 88" and 109", Land Rover Series II, IIA and III, front (2-layer) and rear axle (3-layer); including Cellular Dynamic shock absorbers Basically, a parabolic spring is a spring that consists of two or more leaves. The leaves only touch in three places: In the centre, where they are attached to the axle, and at the outer ends, where they are attached to the vehicle. Between these points, the leaves do not touch, unlike conventional leaf springs.Since in the Parabolic spring a spring tapers from the wide centre to the outer ends, a single leaf acts like a complete spring - the thickness of the spring changes according to a parabola and provides a constant distribution of tension. Each leaf has more or less the shape of a complete multi-leaf spring and can therefore withstand a comparable force. The high quality OEM parabolic springs are paired with Cellular Dynamic shock absorbers. Also included in the kit are leaf spring correction wedges that can be used to correct caster or diff bolt angle by 3 degrees. The parabolic springs include u-bolts and nuts. Scope of supply: 2 x Parabolic Springs - 2 or 3 sheet 2 x Cellular Dynamic long travel shock absorbers 2 x Angle correction wedges
Product number: PABOFE-88-109-VAM
Weight: 25,0 kg
Parcel shipping
This article is available in different versions

From €539.00*
TREKFINDER Height Adjustment Spring Set LAND ROVER NEW Defender 90 with Coil Springs
TREKFINDER Height Adjustment Spring Set LAND ROVER NEW Defender with Coil Springs
TREKFINDER suspension kit LAND ROVER Defender II 90/110 with steel suspension / coil springs +50 mm sporty tight tuning without being uncomfortable eliminates the standard spongy, indirect suspension and driving behaviour Height increase approx. 50 mm ( depending on type and version ) trailer operation is still permissible The length of the shock absorbers, brake lines and other lines is sufficient. Version: Defender 90: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Design: Defender 90 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1400 / 1775EC-TG no.:e5*2007/46*0092..e5*2007/46*0152.. Version: Defender 110: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Model: Defender 110 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1560 / 1800EC-TG no.:e5*2007/46*0092*..e5*2007/46*0125*.. Scope of delivery: 2 pieces TREKFINDER coil springs front axle / linear / black metallic 2 pieces TREKFINDER coil springs rear axle / progressive / black metallic 1 piece TÜV® parts certificate
Product number: NEWDEF-1-LRNEW90SM
Weight: 28,0 kg
Parcel shipping
This article is available in different versions

From €890.00*
Auxiliary Air Spring Defender
Auxiliary Air Spring Defender 90/110/130/Discovery I/ Range Rover Classic
Air Suspension Defender 90/110/130/Discovery I/ Range Rover Classic These auxiliary air springs provide a more stable ride and noticeably improve the handling of the vehicle. Lateral roll of the vehicle is noticeably reduced. The air springs are inflated using the supplied hoses which are routed to an accessible location. A hand pump can be used for this purpose, as can a compressor, or they can simply be filled at the petrol station. They are available for Defender 90, Disovery U and Range Rover Classic or Defender 110 / 130.Supplied in pairs, the auxiliary air springs can be adjusted to suit all conceivable load and off-road conditions. Simply increase the air volume for increased load, or deflate for driving without additional load.The springs are made from durable and dimensionally stable polyurethane.Please select the vehicle.
Product number: NAZLF-90HAM
Weight: 4,0 kg
Parcel shipping
This article is available in different versions

From €459.00*
Comfort spring set TREKFINDER for LAND ROVER Defender 110 with VA +20 / HA +0 millimetres
Comfort spring set TREKFINDER for LAND ROVER Defender 110 until MY 2016, with VA +20 / HA +0 millimetres
Comfort spring set TREKFINDER for LAND ROVER Defender 110 with VA +20 / HA +0 millimetres the lifting is +20 millimetres at the front axle, +0 millimetres at the rear axle matched to the TREKFINDER® shock absorbers Raid ( article no. 90-5470 + 905471 ) SCOPE OF DELIVERY: 4 pieces TREKFINDER® coil springs progressive 1 piece TÜV® parts certificate Suitable for Land Rover Defender 110 until BJ 2016  
Product number: 1-DEFSE
Weight: 33,0 kg
Parcel shipping

Delivery time 5-10 working days

€799.00*
Castor Correction Wedges 3°
Castor Correction Wedges 3 °
Caster correction wedges If you raise your car’s suspension or exchange your original shocks, most of the time axle or wheel geometry, i.e. caster or camber angles, will get out of alignment. To correct aberrations on axles with leaf springs, especially our 3-leaf parabolic springs for the 88” rear axle Land Rover Series II, IIA und III, we are now carrying these caster correction wedges. The wedges provide 3° correction and have a 13 mm pin opening.
Product number: NA-CASTCORR
Weight: 0,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€22.00*
Progressive Additional Spring Kit for Defender 110
Additional Suspension Kit - progressiv for Defender 110
This set conists of: 1x TREKFINDER Coil Spring Set 2x Upper Supports 2x Lower Supports
Product number: ZFKPROGTREK110
Weight: 7,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€357.00*
Defender coil springs
TREKFINDER Coil Springs rear Axle - progressiv
Inside spring set by TREKFINDER, optional for the rear axel with installed liftkit. Scope of Delivery: 2x Progressively wound spring coils
Product number: LRDEHAIFK
Weight: 6,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€199.00*
Lifting Spring Kit for JEEP Renegade 4WD BU Model TRAILHAWK
Lifting Spring Set for JEEP Renegade 4WD BU Model TRAILHAWK by TREKFINDER + 30 Millimeter
Suspension lift kit TREKFINDER for JEEP® Renegade +30 millimetres the lift is approx. +30 millimetressuitable for the Renegade 4WD type BU model ‘TRAILHAWK’.A suitable version for the standard model of the Renegade 4WD Type BU can be purchased here.The standard shock absorbers can still be usedScope of delivery:  4x TREKFINDER coil spring 1x TREKFINDER sticker 1x piece parts certificate
Product number: 1-JERE4WDT
Weight: 16,0 kg
Parcel shipping

Delivery time 5-10 working days

€439.00*
Lifting Spring Set for JEEP Renegade 4WD Type BU by TREKFINDER
Lifting Spring Set for JEEP Renegade 4WD Type BU by TREKFINDER + 30 Millimeter
Model: 4WD Typ BU (Standard-Modell)
Lifting spring kit TREKFINDER for JEEP® Renegade +30 millimetres     the ride height is approx. +30 millimetres     suitable for the standard model of the Renegade 4WD type BU.     A suitable version for the "TRAILHAWK" model can be purchased here.     the standard shock absorbers can still be used Scope of delivery:     4x piece TREKFINDER coil spring     1x piece TREKFINDER sticker     1x piece parts certificate
Product number: 1-JERE4WD
Weight: 16,0 kg
Parcel shipping

Delivery time 5-10 working days

€399.00*
Additional spring kit standard, for Land Rover Defender 110 and 130
Additional spring kit standard, for Land Rover Defender 110 and 130
The additional spring kit for the rear axle of the Land Rover Defender 110 and 130 increases the spring rate and thus minimises the effects of high payloads. The kit consists of 2 additional springs, 2 upper brackets and 2 lower brackets. This kit is intended for vehicles that are permanently or predominantly driven with a high load. For vehicles that are driven with varying loads, we recommend the Progressive additional spring kit. Delivery without expert opinion, registration by individual approval is possible.
Product number: ZFKSTDH110130
Weight: 5,5 kg
Parcel shipping

Delivery time 10-15 working days

€276.00*
HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front right (yellow-white)
HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front right (yellow-white)
Price per unit
Product number: FHD-VR
Weight: 6,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€89.00*
HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front left (blue-red)
HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front left (blue-red)
Price per unit
Product number: FHD-VL
Weight: 6,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€89.00*
HD Springs for Land Rover Defender 90 - rear
HD Springs for Land Rover Defender 90 - rear
Price per unit
Product number: FHD-90H
Weight: 6,0 kg
Parcel shipping

Delivery time 10-15 working days

€90.00*
HD Spring for Land Rover Defender 110/130 rear right (red-green)
HD Spring for Land Rover Defender 110/130 rear right (red-green)
Price per unit
Product number: FHD-110HR
Weight: 6,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€109.00*
HD Spring for Land Rover Defender 110/130 rear left (red-red)
HD Spring for Land Rover Defender 110/130 rear left (red-red)
Price per unit
Product number: FHD-110HL
Weight: 6,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€109.00*
Lowering Kit for LAND ROVER Defender 110 by TREKFINDER  (- 40mm)
Lowering Kit for LAND ROVER Defender 110 by TREKFINDER (- 40mm)
Sportier Look and Optimized Handling: The TREKFINDER Lowering Spring Kit -40mm for Your Defender 110! You love your Land Rover Defender 110 for its robustness and character, but do you wish for a more direct driving feel on the road, improved road holding, and an even more striking, individual appearance? Then we have exactly what you need: the TREKFINDER lowering spring kit for your Defender 110, which lowers it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a significantly more dynamic and planted look but also noticeably optimize its handling on paved roads. Reducing the vehicle height lowers the center of gravity, which can lead to more agile handling and less body roll in corners. Why TREKFINDER Lowering for Your Defender 110? Improved Road Holding: Experience a more stable and precise driving feel, especially in corners and at higher speeds. Sporty, Striking Look: Give your Defender 110 an individual, lower look that makes it stand out from the crowd. More Direct Turn-in: Benefit from a more agile response of your vehicle to steering inputs. Easier Entry: The lower vehicle height can make getting in and out, as well as loading the roof, easier. High-Quality Springs: The specially developed springs are designed to offer an optimal balance between a sportier driving feel and good remaining comfort. Progressively Wound Springs: The lowering is approx. 45 mm on the front axle and approx. 40 mm on the rear axle. Standard Shock Absorbers Can Still Be Used: In most cases, the original shock absorbers can still be used. However, for maximum performance and to maintain optimal spring travel, we recommend combining them with suitably adapted, shorter sports shock absorbers. TÜV Parts Certificate Included: For hassle-free registration, a TÜV® parts certificate is, of course, included. Parts certificate made by H&R. What's Included in the Set? 4 TREKFINDER coil springsThe springs are made from high-strength material 54 CrSi6 - the surface has been solidified by shot peening, zinc phosphated, and polyester coated. 1 TÜV® parts certificate This lowering spring kit is suitable for various Land Rover Defender 110 models (please refer to the enclosed parts certificate for exact model compatibility). ATTENTION: The rear axle load must be reduced to 1,800 kg! Body roll is significantly reduced. Suspension comfort is not impaired. Agility during turn-in, etc., is significantly improved. Your Defender. Your Style. Your Performance. With the TREKFINDER lowering spring kit, you're investing in a more individual appearance and optimized handling for your Land Rover Defender 110. Redefine your Landy's presence and enjoy an extra boost of driving dynamics in everyday life and on journeys. Do you have questions about installation or the ideal combination with suitable shock absorbers? Just contact us – we at Nakatanenga are happy to advise you comprehensively!
Product number: 1-555
Weight: 27,1 kg
Parcel shipping

Delivery time 5-10 working days

€849.00*
Lift-Kit for Land Rover Defender 90 (+40mm) - by Trekfinder
Lift-Kit for Land Rover Defender 90 (+40mm) - by Trekfinder
More Ground Clearance and Off-Road Performance for Your Defender 90: The TREKFINDER Suspension Lift Kit +40mm! Do you want to take your Land Rover Defender 90 where others have to turn back? Are you looking for more ground clearance, better approach and departure angles, and an even more imposing look for your iconic vehicle? Then we have exactly what you need: the TREKFINDER suspension lift kit for your Defender 90, raising it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a more aggressive look, but also noticeably improve its off-road capability. Whether you're battling through deep ruts, mastering rocky passages, or just want to keep an overview in the urban jungle – the additional 40 millimetres make the difference. Why TREKFINDER for Your Defender 90? More Ground Clearance: Overcome obstacles more easily and ensure better underbody protection. Improved Approach and Departure Angles: Master steeper inclines and declines? No problem! Option for Larger Tires: Create space for larger tires and thus optimize traction and appearance. Progressive Spring Rate: The specially wound springs are designed to offer optimal performance both unladen and with additional equipment (up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle). For you, this means: comfort on the road and, at the same time, the necessary stability in off-road conditions. Standard Shock Absorbers Can Still Be Used: In most cases, you can keep your original shock absorbers, which makes the conversion straightforward. For the ultimate driving experience, however, we recommend combining them with suitable shock absorbers, such as the TREKFINDER Koni RAID dampers. TÜV Parts Certificate Included: For a hassle-free registration, a TÜV® parts certificate is naturally included in the delivery scope. What's Included in the Set? 4 TREKFINDER coil springs with progressive rate 1 TÜV® parts certificate This suspension lift kit is suitable for various Land Rover Defender 90 models (TDI, TD5, TD4 – please refer to the parts certificate for exact model compatibility). Due to the increased angle of the front propshaft caused by the lift, we recommend installing a propshaft with a double cardan joint: Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here. Your Defender. Your Adventure. Your Decision. With the TREKFINDER suspension lift kit, you're investing in more freedom and performance for your Land Rover Defender 90. Discover new paths and experience off-road adventures on a new level. Do you have questions about installation or combining it with other suspension components? Just contact us – we at Nakatanenga are happy to advise you!
Product number: 1-222
Weight: 25,1 kg
Parcel shipping

Delivery time 5-10 working days

€699.00*
Lift-Kit for Land Rover Defender 110 (+40mm) - by Trekfinder
Lift-Kit for Land Rover Defender 110 (+40mm) - by Trekfinder
Spring lift-kit for Land Rover Defender 110, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains: * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.
Product number: 1-888
Weight: 36,1 kg
Parcel shipping

Delivery time 5-10 working days

€699.00*

Suspension Springs – Stability and Performance for Any Terrain

Suspension springs are essential for optimizing the performance of an off-road vehicle. They not only ensure optimal ride height but also provide stability, comfort, and the ability to safely tackle uneven terrain. Whether for heavy loads, challenging trails, or increased ground clearance—the right suspension springs prepare your vehicle for every challenge.

Why Are High-Quality Suspension Springs Crucial for Off-Road Vehicles?

Off-road driving puts immense stress on a vehicle’s suspension. Factory springs often lack the capacity to safely handle additional loads like roof-top tents, auxiliary fuel tanks, or winches. Specially designed suspension springs offer key advantages:

  • Enhanced Load Capacity: Supports heavily equipped vehicles and intensive use.

  • Increased Ground Clearance: Protects against obstacles and improves off-road capability.

  • Optimized Handling: Delivers greater stability and comfort, even on rough terrain.

  • Durability: Robust materials and precision engineering for extreme conditions.

Our Selection of Off-Road Suspension Springs

Our off-road shop offers a wide range of suspension springs specifically engineered for 4x4s, SUVs, and pickup trucks, including:

  • Coil Springs: Ideal for independent suspension systems and precise handling.

  • Leaf Springs: Perfect for heavy-duty vehicles with solid axle setups.

  • Progressive Springs: Combine comfort and load capacity with adaptable spring rates.

  • Suspension Kits: Complete solutions with matched shock absorbers for peak performance.

We carry products from leading manufacturers like TREKFINDER, ensuring precision fitment and the highest quality standards.

Tips for Choosing and Maintaining Suspension Springs

Select springs tailored to your vehicle’s load requirements and intended use. Regularly inspect springs for cracks or corrosion to catch wear early. Proper maintenance extends lifespan and ensures consistent performance.

Expert Advice and Support

Unsure which suspension springs are right for your vehicle? Our experienced team provides expert guidance to help you find the perfect solution for your needs.

Pro Tip: The right suspension springs don’t just boost off-road capability—they also enhance ride comfort and safety, no matter how tough the terrain.

Upgrade your vehicle with premium suspension springs today and experience uncompromising off-road adventures!