Optimum base for RAPTOR protective coating - with rust protection and adhesion reinforcement RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer aerosol specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR. The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces. It contains a blend of anti-corrosive additives to inhibit rust and corrosion.Easy and convenient - activate using the valve on baseNo need for spray equipment

RAPTOR Adhesive Promoter Can U-POL offers a full range of additional products for the preparation, use and optimization of your RAPTOR application. Promotes paint adhesion on most automotive surfaces such as plastic, aluminum, galvanized steel, zinc, painted surfaces, fiberglass and also on smoothed surfaces.There is no need to sand down surfaces in hard-to-reach areas (such as under bonnets or trunk lids). Excellent adhesion properties:    sprays flat    can be painted over with most water- or solvent-based paint systems    serves as a protective layer against peeling and protects against damage from solvents

RAPTOR is a robust, two-component polyurethane coating The 5 Litre RAPTOR tins are ideal for large areas such as trailers, floors, heavy equipment and full oversprays. Mix 3:1 (15 L of RAPTOR to 5 L of Hardener) to make more than 20 L of RAPTOR and cover approximately 60 m²Can be brush applied, rolled or sprayed through pneumatic or conventional HVLP spray equipment Features: TINTABLECan be tinted to match required colour.Also available in black. DURABLEProvides tough mechanical damage and stain resistant surface.Protects against rust and corrosion. U.V. RESISTANTDelivers a high level of fade resistance: WATER RESISTANTProvides a water resistant finish, keeping moisture out and reducing rust. RESITSTANTResistant against fuels, hydraulic oils, animal urine, salt water and more. QUICK & EASY TO USEEasy as Fill-Shake-Shoot.Provides excellent adhesion across many substrates.Can be applied with Schutz gun, HVLP gun, roller or brush. Certificates: FIRE RESISTANCERAPTOR has passed flammability testing for motor vehicles according to the test methods FMVSS 302,ISO 3795 & BS AU 169A. SLIP RESISTANCEWhen used with RAPTOR TRACTION Anti-Slip Additive it produces a finish meeting ASTM E303-93.

RAPTOR-LINER black or tintable The 5 liter RAPTOR canisters are perfect for large areas such as trailers, floors, heavy equipment and complete oversprays. - Mix in a ratio of 3: 1 (15 liters of RAPTOR to 5 liters of hardener), so that 20 sprayable liters of RAPTOR are created - sufficient for an area of around 60 m².- Can be applied with a brush or sprayed with pneumatic or conventional HVLP spray equipment.- Suitable for applications in the areas of vehicles, construction, seafaring, leisure, industry, agriculture and trade. The robust and tintable RAPTOR protective coating from U-POL is a two-component coating made of polyurethane, which provides surfaces with a protective layer.Properties:- Durable:Provides a surface that resists mechanical damage and is stain resistant.Protects against rust and corrosion. - UV-resistant:Characterized by high light fastness. - Waterproof:The result is a waterproof surface that keeps moisture away and prevents rust. - Resistant:Resistant to fuels, hydraulic oils, animal urine, salt water and more. - Quick and easy to useSimply fill, shake and spray.Ensures excellent adhesion on various substrates.Can be applied with a protective gun, HVLP gun, roller or brush.Certificates:Fire resistance RAPTOR has passed flammability tests for automobiles using the test methods FMVSS 302, ISO 3795 and BS AU 169A.When used with the RAPTOR additive for slip resistance, a surface is created that meets the ASTM E303-93 standard.Substrates and preparation: - Original paint- Polyester filler- SMC- Aluminum * - Most types of plastic * - Cataphoresis * - Bare metal * - Fiberglass-concrete * - Galvanized surfaces * - Glass fiber reinforced plastic- wood ** Some substrates require one before applying RAPTOR additional surface preparation. 

The RAPTOR coating from U-POL - the right solution for every taste!Looking for a unique transport surface coating? Then the RAPTOR coating from U-POL is just the thing! Unlike other coatings, the RAPTOR coating does not need to be heated. It can simply be sprayed on and then hardens. We offer the 1-litre version in a colourable version. Suitable for application:     Standard RAPTOR spray gun     RAPTOR spray gun with adjustable spray nozzle for better texture adjustment     Roll-on set (application via paint roller) We recommend preparing the substrate:     MIPA Etch-Primer     U-Pol universal etch primer spray     U-Pol etch primer     1K plastic adhesion promoter The RAPTOR coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. One litre (750 ml coating + 250 ml hardener) of RAPTOR is sufficient for approx. 3 m².Please follow the application instructions in the instructions/data sheet.Why use the RAPTOR coating?+ PROTECTION: The coating offers excellent UV protection and protects against rust, corrosion, moisture and extreme temperatures thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option of creating smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface+ COLOUR CHOICE:The multi-purpose coating can be tinted to the colour of your choice or sprayed over with different colours.Scope of delivery: - 1x 710 ml coating - 1x 240 ml hardenerClassification according to the CLP Regulation Symbols GHS02: Flame GHS07: Exclamation mark Signal word Danger! H-phrases H222 - Extremely flammable aerosol.H229 - Pressurised container: May burst if heated.H317 - May cause an allergic skin reaction.H319 - Causes serious eye irritation. Safety instructions P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.P211 - Do not spray on an open flame or other ignition source.P251 - Do not pierce or burn, even after use.P280 - Wear eye protection, protective clothing, protective gloves.P337+P313 - If eye irritation persists: Get medical advice/attention.P410+P412 - Protect from sunlight and do not expose to temperatures exceeding 50 °C. EUH phrases EUH204 - Contains isocyanates. May cause allergic reactions.EUH066 - Repeated exposure may cause skin dryness or cracking.Unknown acute toxicity (CLP) - SDS : 0.35% of the mixture consists of one or more component(s) of unknown acute toxicity (inhalation (vapours))

U-POL RAPTOR - The robust protective coating that also looks good! In contrast to other coatings, the RAPTOR multipurpose coating / painting does not need to be heated. It can simply be sprayed on and then hardens. For a mixture of 1 liter 50ml of paint are required - 1 liter covers an area of ​​approx. 4.2m² - for processing we recommend the standard RAPTOR spray gun, the RAPTOR spray gun with adjustable spray nozzle for better texture adaptation or our roll-on -Set (application via paint roller). To prepare the substrate, we recommend the MIPA Etch primer, the MIPA 1K adhesion promoter, the U-POL universal primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please note the processing instructions stored under instructions / data sheet. What is RAPTOR protective coating / painting? The RAPTOR protective coating is a particularly robust coating made of polyurethane.This give surfaces an efficient and long-lasting protective layer, which is ideal for demanding conditions. The RAPTOR paintwork was developed in such a way that it can withstand almost any weather condition. The reliable UV resistance does not allow fading or fading - not even after many years in the sun. In addition, it offers the best protection against rust formation - thanks to the waterproof surface! Why the RAPTOR multipurpose coating? + PROTECTION:The coating offers excellent UV protection and, thanks to its ideal seal, protects against rust, corrosion, moisture and extreme temperatures. Resistant to fuels, hydraulic oils, animal urine, salt water, etc. + UNIQUE TEXTURES:You have the option of creating smooth or structured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a sheen. + COLOR CHOICE:The multi-purpose coating can be tinted according to the color of your choice or sprayed over with different colors. Scope of delivery: 4x 711 ml bottles coating946 ml hardener  

U-POL RAPTOR spray gun with adjustable spray nozzle Spray gun with adjustable spray nozzle for applying Raptor multi-purpose coating. For screwing onto Raptor bottles. The adjustable spray nozzle provides a professional and even finish and is suitable for better texture matching.Why use the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackExamples of the Raptor coating:

U-POL Universal Adhesive Primer Spray - 450ml 1x 450 ml spray canUniversal adhesion promoter for paints, adhesives and sealants. Ideal for all automotive surfaces such as plastics, aluminium, fibreglass, galvanised and painted surfaces. Can be overcoated with any water or solvent based surface coatings - e.g. Raptor multi-purpose coating.Please note: This item cannot be shipped to Switzerland or third countries!Why the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackExamples of the Raptor coating:  

U-POL RAPTOR Traction anti-slip additive - 200g 1x 200 g resealable packNon-slip additive for surface coatings. It can be added to RAPTOR multi-purpose coating directly before spraying.Using RAPTOR TRACTION with RAPTOR gives a non-slip surface to BS 7976-2.One 200 g pack is sufficient for one bottle of RAPTOR multi-purpose coating (spray bottle).Why use RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackExamples of the Raptor coating:  

U-POL Acid adhesion promoter - 450 ml spray for RAPTOR coating & corrosion protection1x 450 ml spray can The phosphoric acid ester formula promotes adhesion of Raptor Multipurpose Coating to difficult substrates such as galvanised steel and aluminium.U-Pol Acid creates an anti-corrosion barrier that prevents rusting of steel.Please note: This item cannot be shipped to Switzerland or third countries!Why use the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackRaptor coating examples:

U-POL RAPTOR spray gun for applying the coating   Spray gun for applying the coating, for screwing onto Raptor bottles.