Twin-Monotube-Projekt AT 20 9x20“ ET40 black for New Defender

Wind Deflector ClimAir Land Rover Defender TYP L663, front or back Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic.  There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Defender’s windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Defender 90,110 und 130, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in transparent, smoke grey or black and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.  Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately. suitable for New Defender 90,110 and 130 from 2020 onwards

Spare Wheel Bracket Cover Rear Door New Defender   If you’re driving your New Defender mostly short distance and in city traffic, you will most likely have thought about removing the enormous spare wheel from the cargo hold door. For one, it impedes your all-round view in dense traffic and when you’re parking it makes your already sizable Defender that much longer. So, if you decide to do without your spare wheel, we have an equally elegant and flexible solution for you to cover the wheel mount openings in the rear door. Two perfectly fitted black steel covers - available in smooth or tread plate – are simply screwed into the original mount holes, making your Defender’s rear look like nothing’s missing. Should you need your spare wheel re-installed for longer trips, removing the covers is a matter of minutes. Furthermore, if you wish to paint the covers in your vehicle’s color, it is a perfectly simple job for both paint professionals and DIY enthusiast. The black powder coating serves as a perfect primer layer. Scope of delivery: 2 x aluminium sheets, black powder-coated, available in smooth or corrugated.Fixing material Please note: The screws may only be tightened hand-tight! Max. 5Nm! <iframe width="560" height="315" src="https://www.youtube.com/embed/rhPTpwBGm7k?si=iVsQa9mPYfvMNwZA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Seat cover for Land Rover New Defender 110/130, driver and passenger side This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop  – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture. To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls. As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently. Our seat protectors come in the colors Coyote or black with uni-colored mesh insets. Material: Nylon, PU-coated Not suitable for New Defender 90The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever.  This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, LHD The open dashboard design in the New Defender is no coincidence, of course. This is where the impeccably modern cockpit by design director Gerry McGovern and colleagues pays homage to the interior of the classic Defender, the original Landy. Good for us, because we immediately spotted an opportunity to improve storage capabilities: with our nifty dashboard bag for the New Defender. The open dashboard shelf is where you put all the odds and ends in your car. It was like that in the old Landy, it will probably be the same in the new one. But once you’re testing the L663’s tilt angle or maximum gradient, our new dashboard bag, made from easy-to-clean, robust nylon, will keep your stuff from actually flying around. Installing the bag firmly in the dash takes only a few minutes. The zipper has two sliders so that the bag can be opened and shut from both sides. On the inside, mesh compartments and Velcro fleece allow for organized and secure storage of all kinds of items. The front features MOLLE fleece to attach patches and other little things. Since the New Landy sports a designer cockpit, we used transparent plastic material on top of the bag. This allows for the ambient LEDs in the dashboard and the day light from the opening above to filter through into the bag’s interior. The dashboard bag comes in New Landy compatible colors black, gray and coyote. Installation does NOT require drilling, glueing or other damaging methods. It is completely reversible. We include a detailed installation guide. LHD

Switch panel for New Defender from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.