Running board round tube for Land Rover Defender, stainless steel
Running board round tube for Land Rover Defender, stainless steel The round tube running boards serve as an entry aid and vehicle protection. They are made of stainless steel and have an aluminium tread surface with rubber pads to minimise the risk of slipping.The running boards are available for various wheelbases, delivered in pairs, optionally in stainless steel look or with additional black powder coating. Please select below.Delivery is in pairs.The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the bodywork.You can find a suitable crossbar here.
Prices incl. VAT;
Terrafirma Winch Bumper Classic for Land Rover Discovery II
Terrafirma winch bumper Classic for Land Rover Discovery II Incl. two rotating recovery eyes, jacking points and protection of the wiper water reservoir.Suitable for vehicles with and without air conditioning, enables the installation of numerous popular winches from Warn, Tabor, Bearwinch and many more.A parts certificate does not exist, but it is possible to have the bumper registered as a winch carrier by individual approval - please discuss this with your local TÜV or commission us to demonstrate the vehicle!Delivery without winch, winch window or cable, but incl. two rotating recovery eyes.
Prices incl. VAT;
Nakatanenga Winch Bumper 2 for Land Rover Defender
Nakatanenga Winch Bumper 2 for Land Rover Defender The new Nakatanenga NAWIBU2 winch bumper is equally suitable for Land Rover Defender 90/110/130 with or without air conditioning. It fits all model years and engine types, such as Td4, Td5, Tdi, Tdci, Puma, 2.5, 2.4 and 2.2. Locally manufactured for us, the winch bumper is powder-coated black and protects the front of the vehicle even during tough off-road use. The two integrated, swivelling recovery eyes are ideally suited for self and external recovery - or for attaching an optional pulley, which doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval. One of the main innovations of the NAWIBU2 bumper compared to its predecessor is the optional possibility to mount two 70mm driving lamps in a recessed position - this way they are optimally protected against damage in the terrain. We use LED driving lights from Nolden, which provide excellent light with low power consumption. They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. If you order the bumper without headlights, the openings for headlights are not present. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. The UNIVERSAL version is suitable for most winches (except Warn 8274, various Ramsey etc.) - here the common winches from Warn, Tabor, Superwinch Talon, Supwinch Tigershark, Bearwinch etc. fit. Delivery includes stainless steel recovery eyes and stainless steel shackles. Please also note our winch bundles with price advantage! Please select below whether and if so in which colour you would like the Nolden 70 mm LED driving lights as well as which winch type you are using: Note: The bumper is not suitable for the Superwinch EXP model series and the WARN Zeon model series and VR EVO
Prices incl. VAT;
Abenteuer4x4 - Rockslider - for Land Rover Defender
Abenteuer4x4 - Rockslider - for Land Rover Defender The stainless steel Rockslider by Abenteuer 4x4 for the Land Rover Defender 90/110/130CC convince by a completely new design, low weight (approx. 12 kg/piece) and an easy mounting without drilling.To increase rigidity, two webs are welded on the back and the slotted holes on the long side are turned inwards.The Rocksliders not only serve to protect the bodywork, but also provide a secure foothold thanks to their non-slip surface made of drawn knobs, and their shape also protects against excessive dirt in the field. There are several openings on the underside for rinsing out dirt that has been picked up.The Rocksliders - made in Germany - are powder-coated black. Delivery includes fixing material.This item is bulky goods.Material: stainless steel, black powder coatedMaterial thickness: 3mm Delivery: 1 set Rockslider stainless steel (left & right)Bracket and fixing materialSet of screws stainless steel As a useful add-on, there are matching anti-slip pads for the Rockslider.You can find a suitable crossbar here.
Prices incl. VAT;
Terrafirma Commercial Winchbumper
For Land Rover Defender 90/110/130 with air conditioning, for Superwinch winches, without certification. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.
Prices incl. VAT;
Land Rover Defender Black U-POL RAPTOR Stainless Steel Running Board - Step
Running boards Land Rover Defender Why skimp on comfort and looks? These running boards for Land Rover Defender 110 not only look good, they also provide a safer and more comfortable entrance to your vehicle. The round tubes are black powder-coated and equipped with checker plates. The chequer plates on the entrance tubes have an anti-slip coating so that you can enter your vehicle safely.Fixing material is included in the delivery.Important note: These running boards are not compatible with the original splash flaps (front). You will find the matching mud flaps here as well as matching splash flaps here.They are delivered in pairs.Material thickness checker plate: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)You can find a suitable crossbar here.
Prices incl. VAT;
Nakatanenga protective grille type Q Bundle / Set
Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light
Prices incl. VAT;
Low-lying running board round tube for four-door Defender 110 from 2003 onwards
Low running board round tube for four-door Defender 110 from 2003 onwards Low running board for four-door Defender 110 from 2003 onwards The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the body.The running board is black powder-coated and provides a safe step thanks to checker plate supports - even with dirty pipes.Supplied in pairs.You can find a suitable crossbar here.
Prices incl. VAT;
Rock & Tree Slider Defender, hot-dip galvanized
Rock & Tree Slider Defender Available for Defender 90 and 110 - Please select the appropriate variant. The item is supplied hot-dip galvanized! Surface treatment with RAPTOR is possible. You can find matching products here.
Prices incl. VAT;
Low-lying running board round tube for four-door Defender 110 from 2003 onwards
Low-lying running board round tube for two-door Defender 90/110 from 2003 onwards The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the bodywork.The running board is black powder-coated and provides a safe step thanks to checker plate supports - even with dirty pipes.Supplied in pairs.You can find a suitable crossbar here.
Prices incl. VAT;
Nakatanenga Corner Protectors, Set, for Land Rover Defender 90/110
Nakatanenga corner protectors, set, for Land Rover Defender 90/110 The Nakatanenga corner protector protects the rear corners of the Land Rover Defender bodywork from damage during off-road use and everyday driving. Material: Stainless steel, ceramic blasted, black powder-coated Compatible with the Nakatanenga spare wheel carrier Not compatible with the rear step Delivery includes stainless steel mounting material As the original reflector on the vehicle is concealed, we supply two Hella reflectors which can be fitted instead. The corner protectors for the Defender 90 are not compatible with the original mud flaps. ATTENTION: The corner protectors are not compatible with normal mud flaps. Please also note that only one short rear ladder can be fitted at the same time as the corner protectors.
Prices incl. VAT;
Nakatanenga underride protection for Land Rover Defender, 10mm aluminium
Nakatanenga underride protection for Land Rover Defender, 10mm aluminium Underride protection, 10 mm aluminium, galvanically anodised and optionally black powder-coated, side parts 8 mm, steel, galvanised and black passivated, with two integrated heavy duty recovery eyes.The underride guard is attached to the original mounting points using the original vehicle bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material. Please note: The underride guard is ONLY suitable for left-hand drive vehicles!
Prices incl. VAT;
Defender winch bumper
Ideal for off-road use, expeditions or professional rescue operations This high-quality winch bumper was specially developed for the Land Rover Defender and combines extreme robustness with functional design. It not only offers reliable protection off-road, but is also optimally prepared for the installation of a winch. Whether in the deepest terrain, when overcoming difficult passages or for self-recovery - this winch bumper is your reliable partner when it counts.Heavy-duty - also suitable for WARN 9000 Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grilleHeavy-duty - also suitable for WARN 9000 Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, Aluminium, 6mm
Transmissionguard, Aluminium 6 mm, for Land Rover Defender TD4 90/110/130, from MY '07 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Running board round tube, for Land Rover Defender 90/110
Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.
Prices incl. VAT;
Military towing bumper, front, all Defenders - available here!
Military bumper with towing jaw, front, suitable for all Land Rover Defender 90/110/130 Only conditionally suitable for vehicles with air-conditioning, as the towing eye bolt cannot be pulled out after fitting.Delivery incl. bolt and retaining clip. Surface: optionally black primed or hot-dip galvanised. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender 90/110/130 from MY 2007
Durable Aluminum Fender Plates – Non-Slip & Stable, Made in Germany Chequer plate wing top protection for all Land Rover Defender 90/110/130 from model year 2007. Made of 3mm aluminum with additional powder coating (all RAL colours). Supplied in pair with rivets. Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, galvanized steel, 4mm
Transmissionguard, galvanized steel 4 mm, for Land Rover Defender TD4 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td5, galvanized steel, 4mm
Transmissionguard, galvanized steel 4mm, for Land Rover Defender TD5 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until today. Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request. Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated Integrated recovery eyes (22.5 mm diameter) The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material.
Prices incl. VAT;
Chequer plate for bonnet for Defender Td4, 4-piece
Chequer plate for bonnet for Defender Td4, 4-piece Finally available for the Land Rover Defender Td4 from MY07: Chequer plate for the new bonnet, black powder-coated. Delivery incl. rivetsMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)
Prices incl. VAT;
Chequer plate for bonnet for Defender Td4, 2-piece
Chequer plate cladding for the bonnet Finally also available for the Land Rover Defender Td4 from MY07: chequer plate trim for the new bonnet (black powder-coated) This article is bulky goods. Material thickness: 2.5 mm base thickness / 4 mm incl. corrugation (quintet plate)
Prices incl. VAT;
Differential protection for the Salisbury rear axle, large
Large differential protection with slip plate for the Salisbury rear axle of the Land Rover Defender 110/130 to MY02 Only a few components are as exposed in an off-roader as the differentials of the front and rear axles. Quick damage to a stone caused a costly damage, which usually can not be repaired on site and thus means the end of the ride. What is annoying in the home offroad park can quickly become dangerous in more remote regions of the world. Therefore, we have designed corresponding protective devices for the various axles of the Land Rover Defender, which protect the lids of the differentials from damage and in some cases also facilitate easier gliding over the obstacle.Black galvanized, delivery including the required mounting material.
Prices incl. VAT;
Chequer plate bonnet, Land Rover Defender up to MY07, black incl. rivets
Chequer plate for bonnet incl. rivets for Defender up to MY07, black powder coatedIllustration symbolicMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Underride protection, 3-piece, steel 4mm, with welded-in 4mm reinforcement, Land Rover Defender
Underride protection for Land Rover Defender Underride protection with two heavy duty recovery eyes for all Land Rover Defender, robust three-part construction, steel 4mm, with welded-in 4mm reinforcement in the impact area, optionally hot-dip galvanised or hot-dip galvanised and black powder-coated Underride protection suitable for all Land Rover Defender from 1983 to today skid plate made of 4 mm thick steel, with welded-in 4 mm reinforcement in the impact area galvanised or galvanised and black powder-coated as desired Side parts made of 8 mm thick steel, galvanised (black) with two robust heavy duty recovery eyes The underride guard is attached to the original mounting points using the original vehicle bolts. The complete other installation material is included.Material info:Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or very much slows down the corrosion of the base material.Attention: The shackles shown are not included in the delivery.Please select the desired surface.
Prices incl. VAT;
Chequer plate for bonnet, Land Rover Defender up to MY07, incl. rivets
Chequer plate for bonnet incl. rivets for Defender up to MY07 Picture 2 serves only as a colour sample for possible coatings, you order here the article in anodising.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Window guards for Land Rover Defender 90/110
Window grille for Land Rover Defender 90/110 Window grille, for Land Rover Defender 90/110, for the rear side windows, material: aluminium, anodized, black powder-coated, 1 piece, delivery incl. blind rivets Please also note our optional safety mounting set for these grilles. Suitable for the rear side window of the Land Rover Defender 90/110 or windows of the same size (108x45 cm) Dimensions for mounting: Hole spacing horizontal: 112 cm Hole spacing vertical: 49 cm
Prices incl. VAT;
Nakatanenga Headlight Guard for Land Rover Defender
Nakatanenga Headlight Protection Grille for Land Rover Defender Nakatanenga headlight guards for Land Rover Defender 90/110/130 both protect your headlights from mechanical impact (e.g. branches) and also improve the appearance adding the classic look to your vehicle. In addition, with more and more high-value LED headlights being fitted, they also serve as an effective theft protection when useing the supplied theft inhibiting mounting kit. The lamp guards are produced locally from stainless steel and are powder coated in a very durable black coat which can be further painted in any colour (e.g. your vehicle colour). Included in delivery: two light guards, theft inhibiting mounting kit We have tested the guards with the following lights and can confirm that they don't cast any annoying shadows: OEM Land Rover headlights clear glas headlights Truck-Lite 7" LED headlights Nolden 7" LED headlights Further modals are being tested. The Nakatanenga headlight guards can be combined with the original light covers or our heritage-style covers.
Prices incl. VAT;
Nakatanenga Sill Guard Protectors for Land Rover Defender, Chequer Plate
Sill protectors made of checker plate for Land Rover Defender in various designs The 3 mm thick, robust sill protectors made of checker plate prevent damage to the sill area of your Land Rover Defender and also emphasise the rustic appearance of the vehicle.The Nakatanenga door sill protectors are currently available for the Land Rover Defender 90, the 110 Station Wagon and the 130 Crew Cab. They are supplied in pairs, including the rivets required for fitting. Sill protectors made of checker plate, material thickness 3 mm, available for different vehicle versions.Please select the required vehicle model and the desired colour of the door sill protectors.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)You can find loading area rails for the Land Rover Defender 90 and 110 here.
Prices incl. VAT;
Land Rover Defender OEM front bumper
Original Look for Your Defender (90/110/130): The OEM Front Bumper! Has your old front bumper seen better days? An unfortunate bump off-road, corrosion, or simply the desire for a fresh, original look – there are many reasons to replace the bumper on your Land Rover Defender. With this OEM (Original Equipment Manufacturer) front bumper, you ensure that your Defender retains its classic and authentic character. It matches the original part installed at the factory in terms of shape, quality, and fit. This speaks for the OEM Front Bumper: Perfect Fit: Designed as an original part, this bumper fits your Defender 90/110/130, all model years, without any need for modifications.Since this OEM bumper corresponds to the original bumper installed at the factory, no entry in the vehicle documents is necessary. Authentic Look: Preserve the original appearance of your vehicle. Ideal for restorations or if you value originality. Robust Quality: Manufactured to the vehicle manufacturer's standards to withstand the demands of everyday use and light off-road conditions. Easy Replacement: The exchange is usually straightforward, as all mounting points correspond to the original. Value Retention: Using original parts can positively impact the value retention of your Defender. Whether you need to replace a damaged bumper or simply want to restore your Defender to its former glory – with this OEM front bumper, you're making the right choice. Surface: optionally black primed or hot-dip galvanized. Please note: The black primed bumper is only PRIMED (!) and should be painted or powder-coated before assembly, as it is otherwise not corrosion-resistant. Give your Defender its original face back! Order your OEM front bumper now! Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006
Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006 Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to model year 2006. Made of 3 mm aluminum with additional powder coating. Supplied in pair with rivets. These chequer plates are rounded at the front and side to follow the shape of the front wing. For vehicles up to MY 2006 the protection plates include the antenna, for later models, the plates are shorther. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer.Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC
Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC Chequer plate wing top protection for all Land Rover Defender TD4 / Puma 90/110/130 MY 2007-2016. Made of 3 mm aluminum with additional powder coating. Supplied in pair with rivets. CLASSIC version. Please note: the protective covers for Defender MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer
Prices incl. VAT;