LED signal lamps for Land Rover Defender, different sets
Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains: 1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Nakatanenga protective grille type Q Bundle / Set
Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light
Prices incl. VAT;
Nakatanenga Lamp Bracket for Land Rover Defender, without lamps
Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted hanging down) - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting. When the lamps are mounted upright, the vehicle height is minimally increased. The one-piece bracket is made entirely of stainless steel, glass bead blasted and powder coated. It has four mounting eyes for individual headlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the headlamp connection cables (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details. For a neat installation, we recommend the Aquasignal cable grommet for the roof (so the light bar also remains easily removable) as well as our power distributor with fuse holder. Please also note our bundles with price advantage: Nakatanenga Lightbar with 4 Vision-X LED Worklights UMX Nakatanenga lamp hanger with 2 Vision-X LED spotlights LPX Nakatanenga lamp hanger with 4 Vision-X LED spotlights Cannon Not combinable with the original Land Rover lamps and also not with Mantec lamps! Please select the desired colour of the lamp hanger. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:
Prices incl. VAT;
LED rear fog lamp for Land Rover Defender until MY2016, 95mm, clear. Ready to plug in!
LED rear fog lamp for Land Rover Defender, single 95 mm diameter waterproof to IP67 With E-mark and mounting material until MY2016 Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp to mount the new round rear fog lamp. As a rule, the original drill holes can then be used.
Prices incl. VAT;
LED Tail Light / Brake Light for Land Rover Defender, 95mm, smoke grey. Ready to plug in!
LED signal light Land Rover Defender: rear fog light, smoke gray High-quality LED rear fog light for the Land Rover Defender in visually appealing smoke gray / smoke. The signal light has an E-mark and a diameter of 95 mm. Including SuperSeal connector 2-pin. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lights. As a rule, the original drill holes can then be used. Please note that you can also purchase this rear fog light with other signal lights in a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Nakatanenga LED Interior Light Hunter, Universal (not Defender), warm white
Nakatanenga LED interior light Hunter, universal (not Defender), warm white In response to enquiries about how our Nakatanenga interior light for the Land Rover Defender can also be used in other vehicles, we have put together this set. It contains everything you need to use the light in cars, 4x4s, motorhomes etc. that do not have the original Land Rover interior light. Technical data: Light colour (warm white): 4,500 KelvinWavelength (red light): 625 nmVehicle voltage: 12 V (not suitable for 24 V vehicles!)Voltage range: 11-18 VPower consumption (at 12.8 V): 0.15 A (white light)Power consumption (at 12.8 V): 0.05 A (red light)
Prices incl. VAT;
LED signal light reversing light suitable for Series and Defender MY1987-2002
LED - Reversing light Product information: LED-LIGHT PRC7263LED Reversing lightVehicle: Defender - 1987 - 2006 Series III
Prices incl. VAT;
Land Rover Headlight Protectors
Land Rover Headlight Protectors Protection for the main headlights of the Land Rover Defender, made of Makrolon, original Land Rover part, without E-mark, delivery in pairs.
Prices incl. VAT;
LED Signal Light Rear Fog Light suitable for Series and Defender MY1987-2002
LED - rear fog light Product information: LED-LIGHT Code: PRC7254LED Rear fog lightVehicles: Defender - 1987 - 2002 Series III
Prices incl. VAT;
NOLDEN 7" Bi-LED main headlights for Land Rover Defender
Robust main headlamp with integrated low beam, high beam & position light - stainless steel mounting included NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price for one lamp! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1.880 lm / 2.400 lm lumens measured: 1.550 lm / 1.700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.
Prices incl. VAT;
Conversion kit signal lights Land Rover Defender
How much time can you waste with burnt out bulbs in a Defender’s signal lamps? Turn signals, brakes, reverse or parking lights – something’s always not working or failing precisely when you’re taking the car in for inspection or you desperately need them to work in darkness and poor weather. Upgrading to an LED light kit is one of the quickest, cheapest and safest improvements you can achieve on a Landy. Big results for little effort. Before owners of older Defenders can improve their lot with this life-changing modification, they first need to install our Econoseal plug set for all Tdi Landies. Eight 2-pin and two 3-pin plug&play connectors for the LED’s make your life and your 4x4’s maintenance that much easier.
Prices incl. VAT;
Holder for Defender interior light - for retrofitting to soft top (conversions)
Interior Light Mount – Land Rover Defender The perfect solution for soft-top and pop-top conversions! If you've modified your Defender, you might have noticed that the original interior light no longer has a suitable mounting location. Our interior light bracket solves this problem! It attaches directly to the existing rearview mirror mounts, allowing for the convenient relocation of the factory interior light. Optimal Lighting – Right Where You Need It Perfect for soft-top conversions – no roof mounting required Ideal for pop-top Defenders – keeps the interior light below the bed base Improves illumination – positioned directly over the dashboard Made from high-quality aluminum with a durable satin-black finish. Find matching LED interior lights HERE in our shop!
Prices incl. VAT;
LED Turn Signal for Land Rover Defender, white, NAS Style
LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note: The item is supplied without a plug. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Nakatanenga Lamp Bracket for Land Rover Defender, with 4 LED Worklights Round
Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted suspended) - so that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting.The one-piece bracket is made entirely of stainless steel, glass bead blasted and black powder coated. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details.The bracket is equipped with four round Vision-X Utility Market Extreme LED worklights. A total luminous flux of 1,3804 lumens is generated from 7 LEDs per lamp (raw), the power consumption is only 2.9 A (at 12 V), the lights are multi-voltage capable (9-32 V). The two lights for mounting on the outer fastening points of the carrier ensure good visibility to the right and left of the vehicle with 60° illumination, while the two inner lights with 10° illumination provide a beam of light directed far to the front - in this way, as large an area as possible is illuminated in a practical manner and obstacles on the roadway as well as to the right and left of it can be recognized (e.g. approaching game). Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation we recommend the Aquasignal cable grommet for the roof (so the light bar remains easily removable) as well as our power distributor with fuse holder. Please note: A cable set is NOT included in the scope of delivery!!! The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:
Prices incl. VAT;
Nakatanenga Lamp Bracket for Land Rover Defender with 4 LED Spotlights Round
Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted suspended) - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting. The one-piece bracket is made entirely of stainless steel and powder-coated in black. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details. The bracket is equipped with four round Vision-X Cannon 25 W LED spotlights, which have an E-mark. A total luminous flux of 10,000 lumens is generated from one 25 W Luminus LED per lamp (raw), the power consumption is only 2.1 A (at 12 V), the lights are multi-voltage capable (9-32 V). All luminaires have a narrow, far-reaching illumination to the front. If you require a different light characteristic (e.g. wide beam) or a different light colour (e.g. yellow for fog or blue for snow), please order the optional add-on filters. Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation, we recommend the Aquasignal cable gland for the roof (so that the light bar remains easily removable) as well as our power distributor with fuse holder. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:
Prices incl. VAT;