VIAIR 89P-RVS - the compressor especially for campers and motorhomes Technical data:- Suitable for tyre sizes max. 245/70R19.5- Delivery volume: at 0 bar 41.7 L/min, at 3 bar 31.5 L/min, at 5 bar 23.6 L/min and at 7 bar 14.9 litres per minute- Max. working pressure: 120 PSI/8.2 bar- max. voltage: 13.8 volts- max. current consumption: 20 amps- max. ambient temperature for operating the compressor: 70° Celsius- min. ambient temperature for compressor operation: -20° Celsius- max. possible operating time: 25 minutes at 30 PSI- with on/off switch- dimensions (L x W x H): 25cm x 8,1cm x 14,2cm- weight: 2,15 Kg- Protection class: IP53Features:- Stainless steel valves guarantee long-lasting and optimal shutter speeds- generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life- Anodised cylinder surfaces increase protection against abrasion- the piston motor with PTFE piston rings ensures low-friction and optimised smooth running and a long service life- the motors are protected against splash water and thus maximally resistant to corrosion- Integrated, automatic overheating protection for a long compressor service life- CE markingScope of delivery:- 6 metre air hose- 3 metre battery cable with battery terminals- Tyre inflator (solid brass)- Pressure gauge on compressor- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- three additional valve adapters- a high-quality carrying bag Example filling times for the VIAIR compressor kit model 89P-RVS:50 to 60 PSI / 3.4 to 4.1 bar 1 min. 11 sec. (±05 sec.)60 to 80 PSI / 4.1 to 5.5 bar 3 min. 28 sec. (±10 sec.)80 to 90 PSI /5.5 to 6.2 bar 1 minute. 40 sec. (±05 sec.)The model designation "RVS" stands for "RV-Safe", as these compressors have been specially developed and tested for the motorhome market.A mobile and above all portable compressor should never be missing on board a camper or motorhome. The VIAIR 89P-RVS is such a mobile and lightweight 12-volt compressor, specially designed for Class B motorhomes. This compressor inflates most Class B (CP) tyres from 5.5 bar to 6.2 bar (80 to 90 PSI - follow manufacturer's instructions!) in less than 2 minutes. The 89P-RVS has a new and improved longer air hose to reach the tyres comfortably.The tyres are the connecting element between the vehicle and the road. Enormous forces are transmitted over a relatively small area. To be able to guarantee this in the best possible way, regular checking of the tyre pressure is essential, especially for motorhomes. Don't forget to check the spare wheel as well. However, this can be quite inconvenient for many campers, as the spare wheel must first be removed from underneath the floor - something that people tend to do without at the petrol station.For an RV compressor, power is of course crucial. Here, the 89P-RVS offers a maximum working pressure of more than 8 bar - quite sufficient for all compressed air applications you are confronted with as a camper. Please note: The 89P-RVS is not compatible with Presta bicycle valves!Due to the high currents that flow when operating the compressor, it must only be connected directly to the battery via the supplied clamps. However, with the 6m hose, which is also included in the delivery, you can also reach the rear wheels comfortably.As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Please note: We have adapted our Viair range. You will still find all standard products. One of the reasons we have decided to reduce the range is to guarantee better availability.

Compressor connection kit with 4 nozzles - suitable for many inflatables Connection kit for all compressors. The kit consists of 5 parts - 1 adapter + 4 pcs nozzle versions. Use a compressor or tyre pump to reach the recommended PSI within minutes. The adapter with its variable nozzle guides is also suitable for most paddle boards (SUP), canoes, rubber boats, swim rings,inflatable beds,kayaks etc.

Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 24 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: stainless steel valves guarantee long-lasting and optimum shut-off times generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life anodised cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics the motors are protected against splash water and thus maximally resistant to corrosion an integrated, automatic overheating protection protects the longevity of the compressors CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  Tyre inflator incl. pressure gauge  Aluminium stand or plate  Connection from stand to compressor by vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 24Volt max. current consumption: 15 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. with on/off switch  Dimension: length 28 cm / width 15 cm / height 19 cm  Weight: 4,8 Kg  Protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: - 0 to 2 bar - 3 min 00 sec. - 1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  - 0 to 2 bar - 4 min 20 sec. - 1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  - 0 to 2 bar - 5 min. 20 sec. - 1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things. 

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.