VIAIR 400P - Mobile compressor 24 Volt

HD vibration isolator set for all VIAR compressors with base plate When mounting VIAIR compressors with a base plate in your vehicle, we recommend using our heavy duty vibration dampers, as the rubbers on the original ones tend to wear out relatively quickly. The rubber absorbers reduce the compressor’s vibrations and guarantee significantly quieter operation.Fastening material is included.  

VIAIR 5-in-1 Inflator/Air Deflator Spiral Hose Fabric Reinforced 120 PSI MANOMETER - fabric reinforced spiral hose- Continuous inflation/deflation- Internally braided with quick release couplings- Intermittent deflation- 1/4" quick release coupling with male thread- 3-piece set of inflation nozzles- Air chuck with locking lever- incl. storage bagPlease store the hose in the supplied bag when not in use.Make sure that the hose does not come into contact with the head of the compressor during use (risk of melting).

VIAIR replacement metal filter housing Suitable for the following VIAIR compressors: 420C Compressor460C Compressor480C Compressor300P Portable Compressor300P-RVS Portable Compressor400P Portable Compressor400P Automatic Portable Compressor400P-RV Automatic Portable Compressor400P-RVS Automatic Portable Compressor440P Portable Compressor450P Automatic Portable Compressor450P-RV Automatic Portable Compressor450P-RVS Automatic Portable Compressor

VIAIR tyre inflator gun with integrated bleed valve Reads pressure up to 200 PSI and 14 BAR. This useful tool has a normally closed air chuck that can be opened by pressing the lever on the tyre inflator gun. Since the air chuck is normally closed, the tyre inflator gun is a perfect complement to on-board air systems and VIAIR's line of automatic shut-off portable compressors.Please note: Only compatible with VIAR portable compressors with automatic shut-off.- Integrated bleed valve for pressure regulation.- Air chuck with locking lever- 1/4″ quick connector- Closed release valve

Replacement - filter elements for Viair compressors. Foam filter elements with filter fleece for air filters of Viair compressors.- for metal housing (3/8" connection, disc shape, content 3 pieces). Ideal as replacement for frequent use in dusty areas

CONTINOUS DUTY, 485C CE-Compressor, 12V Specifications:   12-volt Permanent magnet motor Duty cycle: 100 % at 200 PSI (13.7 bar) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19 litres) Max. Power consumption: 23 Amps Protection class: IP67 Dimensions: 270 mm L x 105 mm W x 165 mm H Net weight: 4.99kg. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:Stainless steel valves guarantee long-lasting and optimised shut-off timesgenerously dimensioned cooling fins on design-optimised cylinders ensure maximum air dissipation and a longer service lifeAnodised cylinder running surfaces increase protection against abrasionthe piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life propertiesthe motors are protected against splash water and are therefore highly resistant to corrosionintegrated, automatic overheating protection protects the longevity of the compressorsCE labellingTechnical data:    2.5 gallons (approx. 9.5 litres) VIAIR air tank (200 PSI / 13.7 bar) 485C Stealth Black VIAIR compressor with thermal overload protection Digital tyre inflation gun with 180 PSI (12.4 bar) Braided black spiral hose with quick-release coupling 1/4’ NPT quick coupling bolt (F) 1/4’ NPT quick coupling (F) Dashboard indicator with ON / OFF switch Sealed pressure switch (165 PSI (11.3 bar) on, 200 PSI off (13.7 bar) Reducer 1/8‘ NPT (F) to 1/4’ NPT (M) Reducer 3/8‘ NPT (F) to 1/4’ NPT (M) 1/4’ NPT 250 PSI safety valve 1/4’ NPT drain cock (3) 1/4’ NPT compression fittings Suitable for tyres up to 37 inches 4-inch protective sleeves (grommet strips) for air line hoses - Make sure the air line hoses are protected from the sharp edges of the borehole with the supplied grommet strip.Please note: Use thread sealant for proper installation. Thread tape is not recommended. When properly sealed, the recommended torque for 1/8’ is 13.5 Nm. The recommended torque for 1/4‘ and 3/8’ is 22 Nm.  

Compressor connection kit with 4 nozzles - suitable for many inflatables Connection kit for all compressors. The kit consists of 5 parts - 1 adapter + 4 pcs nozzle versions. Use a compressor or tyre pump to reach the recommended PSI within minutes. The adapter with its variable nozzle guides is also suitable for most paddle boards (SUP), canoes, rubber boats, swim rings,inflatable beds,kayaks etc.

VIAIR 89P-RVS – Portable 12V Compressor for 4x4, Off-Road & Motorhomes The VIAIR 89P-RVS is a powerful portable 12V compressor for demanding mobile use. With a maximum working pressure of 120 PSI / 8.2 bar, high air flow and a long 6 m air hose, it is particularly suitable for larger 4x4 vehicles, SUVs, campervans and motorhomes with large or high-pressure tyre combinations. Its strengths become especially apparent during off-road use. Reducing tyre pressure for improved traction and comfort on sand, gravel or rough terrain is common practice – but the tyres then need to be brought back to road pressure before continuing on paved roads. The 89P-RVS provides a compact and reliable solution for repeated airing down and airing up without depending on a petrol station or workshop compressor. The compressor is suitable for tyre sizes up to 245/70 R19.5 and can therefore also handle the higher tyre pressures typically found on heavier vehicles. Most Class B motorhome tyres, for example, can be inflated from 80 to 90 PSI / 5.5 to 6.2 bar in less than two minutes. Power is supplied directly from the vehicle battery via the supplied battery clamps. Combined with the 6 m air hose, this allows convenient access to front and rear tyres even on larger vehicles. Original VIAIR Part Number (P/N): 00089Model: VIAIR 89P-RVS Technical specifications: Operating voltage: 12 V Supply voltage: up to 13.8 V Maximum tyre size: 245/70 R19.5 Air flow at 0 bar: 41.7 l/min Air flow at 3 bar: 31.5 l/min Air flow at 5 bar: 23.6 l/min Air flow at 7 bar: 14.9 l/min Maximum working pressure: 120 PSI / 8.2 bar Maximum current draw: 20 A Duty cycle: 25 minutes at 30 PSI / approx. 2 bar Operating temperature: -20 °C to +70 °C Protection rating: IP53 Dimensions: approx. 25 × 8.1 × 14.2 cm Net weight: approx. 2.15 kg Power cable length: approx. 3 m Air hose length: approx. 6 m Integrated on/off switch Designed for demanding 4x4 and off-road use: Suitable for larger 4x4, SUV, campervan and motorhome tyre combinations Ideal for restoring road pressure after deliberately airing down tyres off-road High maximum pressure of 120 PSI / 8.2 bar Long 6 m air hose for easy access to all four wheels Direct connection to the vehicle battery for reliable power supply Solid brass screw-on tyre chuck Pressure gauge integrated into the compressor Stainless-steel valves for durability and consistent performance Anodised cylinder surface for increased wear resistance PTFE piston ring for low-friction operation and long service life Large cooling fins for efficient heat dissipation Integrated thermal overload protection Typical inflation times: 50 to 60 PSI / 3.4 to 4.1 bar: approx. 1 min. 11 sec. (± 5 sec.) 60 to 80 PSI / 4.1 to 5.5 bar: approx. 3 min. 28 sec. (± 10 sec.) 80 to 90 PSI / 5.5 to 6.2 bar: approx. 1 min. 40 sec. (± 5 sec.) Scope of delivery: 1 × VIAIR 89P-RVS 12V compressor 1 × approx. 6 m air hose 1 × approx. 3 m power cable with battery clamps 1 × solid brass screw-on tyre chuck 1 × integrated pressure gauge 3 × inflation adapters 1 × Presta valve adapter 1 × deluxe carry bag For 4x4 travel, expeditions and heavier vehicles Large tyre volumes and higher vehicle weights place considerably greater demands on a portable compressor than occasional pressure correction on a passenger car. The VIAIR 89P-RVS is designed for applications where tyre pressure needs to be adjusted reliably and repeatedly while travelling. This is particularly relevant for off-road driving: lowering tyre pressure can increase the tyre footprint and improve traction and ride comfort on loose or uneven surfaces. Before returning to normal road use, the tyres must be inflated to the pressure specified for the vehicle. A portable compressor such as the 89P-RVS makes this possible independently of external compressed-air supplies. The combination of compact dimensions, direct battery connection, high working pressure and a 6 m hose makes the compressor particularly practical for 4x4 touring, overlanding, campervans and motorhomes. Note on off-road use: When operating the compressor in dusty or sandy environments, it should be positioned away from loose dust and dirt whenever possible. Operation directly on sandy or dusty ground should be avoided. An elevated and preferably protected position, for example inside the vehicle or on the load area, helps to minimise the intake of fine particles. For particularly intensive continuous operation, very large tyre volumes or extreme off-road applications, a larger VIAIR compressor may be the more suitable choice. Suitable alternatives from the VIAIR range: VIAIR 400P-A portable 12V compressor with automatic shut-off VIAIR 450P-A portable 12V compressor with automatic shut-off

Bicycle valve adapter for Sclaverand and Dunlop valves With this valve adapter, you can inflate your bicycle tires with a Sclaverand valve or Dunlop valve. The adapter is compatible with our VIAIR compressors. Scope of delivery: 1 pc. Valve adapter

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.