Articles from our current newsletter

Nakatanenga CargoBear for Ineos Grenadier The launch of the Ineos Grenadier was without a doubt the biggest event for the off-road community since the launch of the new Defender. And since the two are more or less officially competing for the title of best successor to the old Landy, it's a pretty exciting affair. When it comes to the shape of the roof, the new Ineos is hardly distinguishable from the old Defender, including the slope at the front, the side gutters and the mighty roof load of 150 kg (dynamic load) and 420 kg (static). All of that makes it a joy to fit the Grenadier with our CargoBear modular roof rack. The legendary CargoBear is just as ambitious and versatile as the British newcomer with its Bavarian-Austrian technology and old-school look. The CargoBear for the Grenadier (Station Wagon/Utility Wagon) can be ordered in four variations – but thanks to our modular system, subsequent conversions or add-ons are easily done, whenever your specific requirements change. In the simplest, open version, the roof rack consists of three crossbars, a wind deflector at the front and the end carrier at the rear. For closed and therefore fully accessible platforms, the Bear is available in three further versions: As a short roof rack with three crossbars, two closed sections between the bars, a wind deflector and end panel. As a long version with four crossbars, three closed sections between the bars, a wind deflector and end panel. There is also a special version for grenadiers with safari windows in the front roof. Here the rear two sections are fully closed, the front one has two openings on the sides, so as not to obstruct the safari windows. As with the old Landy, the ultra-flat roof rack is simply mounted to the roof gutters by clamping brackets. A hybrid solution specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof to take excessive load off the gutters. As always, all aluminum and stainless steel components of the CargoBear are powder-coated in black. This makes them a perfect match for the purist design of the Grenadier. Ineos Grenadier and CargoBear - the ultimate combination for work, sport, camping or expedition! The Trier Fire Brigade also relies on our quality – equipment that meets the highest standards! Material:Crossbar, platform, wind deflector and end panel: powder-coated aluminum (black)U-profiles and support brackets: Stainless steel powder-coated (black) MADE IN GERMANY

Warm Air Pass-Through for Vehicle Doors – Universal, Durable, Camping-Ready Want to direct warm air into your vehicle without leaving the door open? Our universal warm air pass-through for vehicle doors creates a practical opening for your air hose while noticeably reducing drafts and heat loss—ideal for camping, vanlife, or stationary use at a campsite.   Your advantages at a glance • Universal fit: suitable for almost all common vehicle doors (car, SUV, van, camper) • Durable tent fabric: lightweight, flexible, and designed for outdoor use • Two colors: Coyote or Reed Green – subtle, functional, and matching your setup   How it works The pass-through is hooked into the door frame area, the hose is guided through the opening, and the door is then closed. This keeps the interior better sealed while your system continues to reliably transport air.   Scope of delivery 1× Warm air pass-through for vehicle door   Recommended for stationary use only (not while driving).

Narrow Air Vent – 27 x 6 cm – for 60 mm Connection This narrow air vent is the ideal solution for clean and space-saving warm air distribution in a camper, van, panel van, or expedition vehicle. Its flat, elongated design is especially advantageous wherever traditional round vents would take up too much space. With its dimensions of 27 x 6 cm, the vent is perfect for discreet installation in furniture, paneling, or base areas. The 60 mm warm air duct connection makes it compatible with many common parking heater systems. The durable material is designed for use in heating applications and offers excellent dimensional stability as well as heat resistance. Ideal for anyone looking for a functional and visually subtle solution for warm air routing. Product features:• narrow design for space-saving installation• suitable for 60 mm connection• dimensions: 27 x 6 cm• durable and heat-resistant• ideal for campers, vans, off-road vehicles, and expedition vehicles

Magnetic Warm Air Connectors and Adapters – flexible, quick, and clean connection With our magnetic adapters for warm air hoses, connecting heating boxes, parking heaters, or other warm air systems is especially easy, quick, and convenient. The components are designed for a practical and clean connection and make coupling and uncoupling much easier – ideal wherever warm air needs to be routed flexibly or disconnected quickly when required. The system consists of the magnetic mounting flange 60 mm and the matching magnetic warm air connector 60 mm, or alternatively the magnetic warm air connector 60 mm, freely rotatable. Important: The mounting flange is the fixed receiving part and always requires a matching connector as its counterpart. Only this combination creates the complete magnetic connection. For additional flexibility, an adapter ring from 60 mm to 75 mm is available, allowing different hose diameters to be connected easily. The magnetic sealing cap fits exclusively on the mounting flange. It is used to close the mounting flange securely and cleanly when not in use. It is not intended for use on the magnetic connector or the freely rotatable connector. The magnetic connection allows quick installation and convenient handling in daily use. This makes the adapters ideal for mobile heating systems, camping conversions, workshop applications, or custom warm air routing in vehicles. Variants at a glance:• Magnetic mounting flange 60 mm• Magnetic warm air connector 60 mm• Magnetic warm air connector 60 mm, freely rotatable• Magnetic sealing cap for mounting flange• Adapter ring for warm air connector 60 mm to 75 mm Important notes:The mounting flange always requires a matching counterpart: magnetic warm air connector 60 mm or magnetic warm air connector 60 mm, freely rotatableThe sealing cap fits only on the mounting flange Advantages:• quick and easy connection of warm air systems• ideal for heating boxes, parking heaters, and custom solutions• convenient coupling and uncoupling thanks to the magnetic connection• clean and practical solution for mobile and fixed installations• flexibly expandable with matching connector and adapter solutions