Current %

The striking design looks light and elegant on heavy vehicles. 20-inch chrome alloy wheel for New Defender Data: Wheel size: 9x20" ET: 37 Bolt pattern: 5x120 Colour: chrome, black Special features: suitable for winter use 

Seat covers for Suzuki Jimny I Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. Available for: Suzuki Jimny I  Set consists of: Driver's side, passenger's side Colour: Coyote, Black,  Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Powerful Duo for Clear Vision: Work Light + Protective Grill Bundle This bundle consists of 1 x NOLDEN LED work light / reversing light (optionally with 500 or 1,000 lumens)1 x protective grille for Nolden work lights / reversing lights

Tool Roll - modular tool bag in a set The principle of Tool Roll is as ingenious as it is old: roll out instead of junk. The square fits into the round, remains always at the intended place and therefore takes less space altogether. Can you still improve that? We say yes. The newly developed, modular Nakatanenga Tool Roll owes its added value to our experience as an off-roader, screwdriver and also as a fan of tactical equipment. The clou are big velcro surfaces on the baseplate. So our tool roll can be equipped arbitrarily and is extremely flexible in use. Depending on the set, up to six tool bags (sizes M and S) can be attached. So you take with you only the tool sets that are really needed. For better clarity, the individual pockets can be color-coded via the zip puller. Fluorescent, writable ID patches help to identify the content, even in the dark. And we also thought about it: Loose bits and pieces find their place in the sewn-in mesh pockets. The Tool Roll rolls up clean even with maximum placement and is quickly closed or opened with two clip closures. Carrying handle and shoulder strap facilitate transport. When deployed, the Toll Roll on the D-rings (two or three depending on size) is hung on the wall, on the vehicle or on the tree in the field. Robust, high-quality nylon is our material of choice to guarantee long life even with hard use. With the choice of different sizes and combinable bags you will find as a mechanic, do-it-yourself, biker or cyclist guaranteed your own, optimal Nakatanenga Tool Roll combination. Material: Bag: 100% nylon Closure: Duraflex Dimensions: Basic size small base: 25x64 cm Basic size small Velcro bag: 23x6x6 cm Basic size large base: 46x64 cm Basic size large Velcro pocket: 44x6x6 cm There is a smaller and a larger version of the tool roll - each with different accessories. Please select the desired variant. Note: Delivery is WITHOUT content!MADE IN EU The tool roll sets at a glance: Tool bag size S - set 1:• 1 x size S base plate• 4 x Velcro pocket size S. Tool bag size S - set 2:• 1 x size S base plate• 4 x Velcro pocket size S.• 1 x attachable work pad size S Tool bag size M - set 1:• 1 x size M base plate• 4 x Velcro pockets, size M Tool bag size M - set 2:• 1 x size M base plate• 4 x Velcro pockets, size M• 1 x attachable work mat size M Tool bag size M - set 3:• 1 x size M base plate• 3 x Velcro pockets, size M• 2 x Velcro pocket size S Tool bag size M - set 4:• 1 x size M base plate• 3 x Velcro pockets, size M• 2 x Velcro pocket size S.• 1 x attachable work mat size M Tool bag size M - set 5:• 1 x size M base plate• 2 x Velcro pockets, size M• 4 x Velcro pocket size S Size M - set 6:• 1 x size M base plate• 2 x Velcro pockets, size M• 4 x Velcro pocket size S• 1 x attachable work mat size M

Nakatanenga gift voucher worth €200 Whether for outdoor fans, off-road enthusiasts or Land Rover enthusiasts: There is guaranteed to be something for everyone in our extensive shop. The shopping vouchers can be redeemed for all our goods and services. Immediately after payment, you will receive a high-quality gift voucher in printed form free of charge. For those who are in a hurry:We will also be happy to send you the voucher by e-mail as a PDF file for you to print out yourself. Depending on the payment method, you will then usually receive the voucher on the same day as your order. The vouchers are valid indefinitely.

Imwoid Sepp - He's back! We are pleased to be able to offer a popular OA classic in an improved form.The perfect shape and the ingenious handle have remained.The handle has been extended with a countersink on both sides that can serve as a grip aid for reversegrip or as a guide for a bowdrill.The blade steel has been upgraded to N690.Top quality manufactured in Maniago/Italy by Viper Tecnocut. Design by Tommaso Rumici Technical data: Blade length 95mm blade thickness 3,7mm Blade width approx. 30mm steel N690 58-59 HRC Flat ground Dark Stonewashed PVD handle length approx. 110mm handle thickness approx. 14,8mm G10 olive or black with 0,8mm spacer of G10 orange handle scales with 2 hollow screws and countersink for bowdrill sheath Kydex with LOK by Vegaholster Concept Matthias Hainich Design Tommaso Rumici Made in Italy by Viper Tecnocut Choice of colour: Black or olive Important notice: The knife is not subject to a carrying ban in Germany. Sale of knives only to persons over 18 years and against proof of age. Please send us a copy of your ID (front and back) as proof of age.

Tool Roll Hungry Mini - now also with WMF chef's knife - FREE! With this additional chef's knife, all common cutting tasks can be carried out effortlessly: The larger chef's knife is ideal for slicing and chopping solid ingredients, while the smaller preparation knife is perfect for finer work. Both knives impress with their long-lasting sharpness and hardened blades made of stainless, acid-resistant special steel, which is also coated. The ergonomically shaped handles fit perfectly in the hand and offer a secure grip. Thanks to the practical protective blade covers, the knives can be stored safely and space-savingly in the cutlery drawer.   Tool Roll Hungry Edition, incl. Camping Cutlery The Defender represents English cultural heritage, just like a scrumptious picnic with cucumber sandwiches and Scotch Eggs. At Nakatanenga we thought, that’s not just a very good combination on a country estate in Somerset, but anywhere, really, where the Great Outdoors meets fine dining. And that’s why we’ve equipped our tried and tested Tool Roll with exquisite cutlery: et voilà, the Tool Roll Hungry Edition was born, available in Mini, Maxi and Titan! Instead of the usual camping sets with tin bowls, plastic sporks and aluminium knives, we offer stainless steel cutlery in the Tool Roll Hungry Edition Mini and Maxi as well as high-quality WMF cutting knives with heat-resistant and ergonomically shaped plastic handles. The Mini-set is designed for four people and the Maxi Edition for six, with a chopping board and a four-piece cooking spoon set made from durable bamboo. If you have to watch the weight of your equipment or you’re generally fascinated by great materials, the Tool Roll Hungry Mini Titan is the one for you. Being harder than steel, titanium allows for extremely thin manufacture of cutlery, plates, mugs and so forth while maintaining incredible robustness and durability. As a result, titanium utensils are generally even lighter than their aluminium equivalents, while providing all the health-related and hygienic advantages of stainless steel. The titanium fork and spoon sets can also be purchased separately. Whether you go for stainless steel or titanium, everything fits neatly into the space-saving roll-up bags made of durable nylon. Carrying strap and loops on the underside of the Maxi-Roll expand transport and combination options.  And of course, the 12 pocket slots still provide space for other essential items. Can opener, corkscrew or maybe just the lobster tongs? No matter how you roll food-wise, whether it’s hot dogs or Foie Gras for you, the Tool Roll Hungry Edition is an unbeatably practical piece "Home from Home" for campers, off-roaders and foodies. Scope of delivery Tool Roll Mini Hungry: 1x Tool Roll MINI4x knife (dishwasher safe)1x WMF utility knife (Not suitable for dishwashers)4x fork (dishwasher safe)4x big spoon (dishwasher safe)4x coffee / teaspoon (dishwasher safe) Scope of delivery Tool Roll Mini Hungry Titan: 1x Tool Roll MINI6x knife (dishwasher safe)1x WMF utility knife (Not suitable for dishwashers)6x fork titan (dishwasher safe)6x spoon titan (dishwasher safe) Scope of delivery Tool Roll Maxi Hungry: 1x Tool Roll MAXI6x knife (dishwasher safe)1x WMF utility knife (Not suitable for dishwashers)1x WMF chef's knife (Not suitable for dishwashers)6x fork (dishwasher safe)6x big spoon (dishwasher safe)6x coffee / teaspoon (dishwasher safe)1x 4-piece bamboo cooking spoon set (dishwasher safe)1x bamboo cutting board (Not suitable for dishwashers) MADE IN EU And by the way: At Nakatanenga, we only use materials with 100% nylon PU coating for all textile articles. Nylon PU (polyurethanes) is, unlike PVC, free from harmful phthalate-based plasticizers. Low molecular weight phthalates were until recently the most common plasticizers for plastics of all kinds, and are even used in food and cosmetics. However, they accumulate in the environment and are due to their molecular nature suspected of acting as the body's own hormones. This is toxicologically highly questionable and is considered the trigger for various diseases, including cancer. For Nakatanenga, it goes without saying that when it comes to coating textile products, it is only possible to use environmentally friendly and harmless alternatives such as nylon PU.

Legendary design meets function - the new Tactical Messenger Bag with a soft-top look The new version of the popular Tactical messenger bag impresses not only with its classic English look, but also with its high-quality materials. The first glance already gives an idea of the inspiration behind the design: the original soft top of Land Rover vehicles! The mix of traditional canvas and modern materials ensures durability and ease of use. The best of two worlds! The bag is complemented with classic elements such as brass buckles - even the loops of the bag are reminiscent of the attachment loops of the well-known Land Rover soft tops and give a nostalgic feeling. The messenger bag was made according to US military standards (MIL-SPEC) and our specifications. You like to travel and to think practically? Your bag should representate this lifestyle!  The tactical Messenger bag has various storage compartments, in which you can arrange and store your items while travelling. It has two front compartments and a side compartment for important papers and documents. One of the both front compartments has a suitable strap for a multifunctional knive, some pens or other lengthy items. Our secret TIP for those who want to give the bag a modern vintage look: Wash the bag individually and closed at 60 °C with a little detergent To dry put the bag stuffed with newspaper in the sun Done is your unique vintage look! Material: Straps and fabric: 100% CanvasBuckles: BrassDimensions:35x19x25 cm Weight: 1,2 kg

Blower control for Land Rover Defender Fan and heater in classic Defenders are notoriously poor in performance and reliability – especially in northern latitudes, where cold winters and rainy days regularly impair comfort and safety in the cockpit. While Land Rover upgraded to an improved fan heater for the Td4 (MY 2007), all previous models can easily be retrofitted with an electronic control system. In contrast to the old analog fan heater, the new electronic control system allows for continuous adjustments. This ensures more efficient operation and therefore better ventilation, heating and dehumidification in the interior. Heating your vehicle’s interior can be achieved much quicker, as is demisting or de-icing of the windows. Additionally, the electronic control is much less prone to wear than the old mechanical solution using sliders and resistors, which are susceptible to shocks and vibrations. The retrofit kit includes the electronic control, a stepless slider and all the assembly parts for the connections. Installation instructions are included.  

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Wood lids with and without metal feet Robust, weather-resistant and easy-to-clean wood lids transform the 25, 48 and 90 litre Transformer folding crates into practical tables for mobile use, camping, the workshop or any other place where the Transformer Crates are used.   There are also new table legs made of high-quality stainless steel. They are stable, rustproof and perfectly designed for durability. They also take up little space in the Transformer folding crate when folded. Thanks to the special holder, the legs are securely locked when folded and remain in place, no matter where the journey takes you.    This space-saving feature allows for efficient storage without losing valuable space. This versatility allows the tables to be used in a wide variety of spaces and for different purposes.   The stainless steel construction also allows for the maximum height of the legs, which can be stored diagonally in the box. As stainless steel remains rust-free even without a coating, it retains its timeless design for many years.  Lid dimensions: for 25L: L39.5 x W29.5 x H1.5cm for 48L: L54.0 x W36.0 x H1.5cm - including feet H 34.0cm for 90L: L73.0 x W42.0 x H1.5cm - including feet H 57.5cm The metal feet are already fitted by us in the value bundle. Metal feet in a set of 4, including template and matching screws, are available HERE in the store!   The Transformer folding boxes from Outstandards are available in the colours:   25 litre capacity: Ivory or Grey 48 litre volume: Ivory, black or olive 90 litre volume: black or olive Additional accessories can be ordered separately:       Hand trolley: for 48 litre box     Rubber straps: for 48 litre box, 90 litre box

Complete solution for clean diesel flow Powerful 100 W heating sleeve for fuel filters with a diameter between 73-95 mm. The sleeve has got crimped connectors and a wiring harness (incl. time relay and push-button). It prevents the gelling of fuel in colder temperatures and can be fitted to any vehicle with 12 V. Compared to customary sleeves this silicone heating sleeve is very flexible and can be fitted to many diesel filters. The sleeve guarantees ideal heating as it sits closely to the filter. Comes with powerful velcro strips for fitting. The waterproof wiring harness is fitted with a time relay with a push-button. The sleeve is switched on by push-button, it then heats for six minutes until it switches off automatically or for another six minutes if you press the button again. In cold climates your diesel fuel is prone to gelling as paraffin crystals form which turn the fuel flaky. As a result fuel flow through the filter stops and your engine loses power until it finally cuts out. Once the filter is blocked, it can only be freed by inducing heat. By emitting this heat and transferring it to the filter, our heating sleeve prevents the clogging of the filter element. The paraffin crystals are immediately dissolved by the induction of heat and the fuel can easily pass the filter again. You can purchase just the sleeve, without plugs, harness, relay and push-button here in our shop. Technical details:Maximal heat resistance of insulation: 300 °CMaximal operating temperature: 250 °CVoltage: 12 V, AC or DCOutput: 100 W Comes with:- silicone heating sleeve- wiring harness with time relay and push-button- 2 strong velcro straps

Trekking bundle including storage bag Some tools are indispensable when you want to set up a proper camp while on holiday, off-roading or on expedition. For tough jobs like digging or wood work, you want high quality tools in your basic equipment. Our compact tool bundle in the practical roll-up bag features a Swiss military pickaxe as well as an all-purpose hatchet and a Japanese-style pruning saw, both by Bellota. The military pickaxe with its forged pick and the flat head is ideal for quick digs around the camp: making a firepit, digging drains, removing rocks from the tent area and a lot of other jobs. The all-purpose hatchet by Spanish Manufacturer Bellota is made in the Biscayne trade axe style, a traditional and very ergonomic design. Making kindling or firewood, delimbing trees or removing underbrush from your camp – no problem for the Bellota. And when you need precision in your wood working tasks, you can always rely on the foldable Japanese pruning saw with its extremely sharp blade. It adds exactness and speed to all sorts of jobs around the camp site, e.g. cutting poles for shelter or tripods and so forth. The Nylon roll-up bag for your tools features extra-strong seams and is as sturdy as it is easy to clean – providing neat and safe storage for your basic camp site kit. The tool roll features strong straps to tighten the bundle as well as carrying handles and fastening slings for safe and compact transport. And by the way: with an overall weight of only 2.5 kg approximately and packing dimensions of 58 x 15cm, this tool-set will fit anywhere.  

Retrofittable seat heating Deluxe 12V The high-quality carbon seat heating system was developed for retrofitting in individual seats.You can switch off the heat supply of the carbon surface heating elements via a switch (0% power) or set it to one of 3 different heating modes: Mode 1: 25% power Mode 2: 50% power Mode 3: 75% power This three-stage system provides pleasant warmth within a few minutes. When a level is set, the heater heats up to 100% power in just two minutes and then adjusts down to the desired mode (25%, 50% or 75%). This allows the carbon panel heating elements to reach the desired heat output much more quickly. The button or switch indicates the current level via three LEDs integrated into the button. The button can easily be stuck horizontally or vertically anywhere. Three adjustable levels and remarkably fast temperature regulation make this seat heater unique. Differences between carbon panel heating elements and heating elements using stranded wire technology: The carbon panel heating elements have considerable advantages over the previously widely used heating elements with stranded wire technology. For example, only carbon heating elements can be adapted and trimmed during installation. With conventional stranded wire technology, a heating wire runs inside the heating element in the form of a wave. If this is damaged at any point, e.g. due to mechanical stress or overheating, the entire heating element fails. Parallel technology is used in the new carbon surface heating elements. Many independent carbon heating fibers run inside the heating element, ensuring its reliability. The heat distribution is much more homogeneous and therefore more pleasant with carbon panel heating elements. Scope of delivery: 2 carbon heating mats (one for the seat and one for the back) 1 wiring harness 1 button incl. necessary installation material and installation instructions   Technical data: Size of the heating mats: 645 x 250 mm (can be trimmed according to the installation instructions) Operating voltage: 9.6 V - 15 V Operating temperature range: -20 °C to +80 °C Power: up to 90W@13.8V Certification: ECE, EMC  

Stainless steel cover for air intake Military snow cover from stainless steel exclusively for Nakatanenga fits Land Rover Defender 90/110/130 (all model years) and reliably prevents the ingress of water, snow or dead foliage into the heating system. If independent vehicle heating is fitted, this will also always get enough clean air to work properly. Originally developed for the military Wolf-type Defenders, this military snow cover is also highly useful for civilian vehicles. The sturdy cover can be stepped on and is available for LHD and RHD vehicles. It can be fitted with or without chequer plate wingtop protection. Fitting simply means swapping the original cover and attaching the MSC with the six supplied stainless steel screws. Takes about 10 minutes. A new seal is supplied, too. Please choose desired type.

NOLDEN LED daytime running lights, 70mm Set of 2, with E-mark, for installation. Technical data:Dimensions: 69.2x55 mmLED: 1x LED 13 WFastening: 2x M6Approval: ECE (E-mark)Material: AluminumColor: Black or chrome - please select.

Jumper cable 6m length, max. 1200A The 6 metre long jumper cable offers quick help for weak 12 V or 24 V batteries. It is suitable for all petrol and diesel engines in cars and trucks.The copper mesh enables the cable to make optimum contact. The extra strong cast brass pliers prevent sparks and electric shocks thanks to their insulated handles. The scope of delivery includes a carrying bag for the jumper cable.Technical data:- Length: 2 x 6 m- Cable cross-section: 70 mm²- Max. load: 1,200 A (terminal)- Colour: red / black

Studs (Ø 9mm) for winter tyres If you have already planned a holiday abroad and regularly travel through snow, forest, rain or cold areas, these tyre studs are the perfect travel companions.  The studs can be fitted not only to tyres with existing stud holes, but also to other winter tyres. This is because the studs, thanks to their worm-shaped screw thread, can be easily attached and removed with the appropriate mounting tool and a standard cordless screwdriver, without leaving large visible tyre studs. You can decide for yourself how many spikes to put in the tyre and increase or decrease the number at any time afterwards if necessary. A spike can be conveniently removed from the anchorage and screwed back in later. Note: Tyre spikes are prohibited in Germany. Minimum tire tread: 9.5 mmMounting steps:1. position the head of the spike with the appropriate mounting tool.2. place the thread of the stud on the surface of the tyre3. push down & screw in with a cordless screwdriver while turning slowly4. screw in the spike only until the head touches the tyre surface.5. if the spike is unintentionally screwed in too far, leave it as it is - do not unscrew it again to try to get it into the correct position6. check the spikes every 1000km & correct if necessary7. with the help of the mounting tool and a cordless screwdriver the spikes can be grasped & removedTechnical data:Dimensions (Ø x length): 9.0 x 15.2 mmPenetration depth: 12.0 mmSpike diameter: 2.6 mmNote: Mounting tool for spikes 9mm Ø can be found HERE in the shop

Warm Air Pass-Through for Vehicle Doors – Universal, Durable, Camping-Ready Want to direct warm air into your vehicle without leaving the door open? Our universal warm air pass-through for vehicle doors creates a practical opening for your air hose while noticeably reducing drafts and heat loss—ideal for camping, vanlife, or stationary use at a campsite.   Your advantages at a glance • Universal fit: suitable for almost all common vehicle doors (car, SUV, van, camper) • Durable tent fabric: lightweight, flexible, and designed for outdoor use • Two colors: Coyote or Reed Green – subtle, functional, and matching your setup   How it works The pass-through is hooked into the door frame area, the hose is guided through the opening, and the door is then closed. This keeps the interior better sealed while your system continues to reliably transport air.   Scope of delivery 1× Warm air pass-through for vehicle door   Recommended for stationary use only (not while driving).

Everything Under Control with the Clips Maxi Box This box contains the most popular clips, plastic rivets, mating bushings and mounting hardware for Land Rover vehicles. The set contains the following 280 parts: 35 pieces rivet15 pieces trim fastener15 pieces scrivet15 pieces scrivet15 pieces scrivet25 pieces finisher clip20 pieces stud door casing20 pieces stud door casing - blue20 pieces fastener60 pieces snapsac25 pieces door casing stud15 pieces fir tree roof insulation retainer

High quality plastic water cans with 40 liters capacity These plastic water cans are predestined to be transported (e.g., on a roof rack, in the boot, etc.) of fresh drinking water. They are now available with a new, standardized screw cap and spout in standard DIN format. Information about the canisters: 40 liter plastic water can: Dimensions: 460x335x335 mmPolyethylene (BPA-free / food grade)Scope of supply: 40 liter water canisters made of plastic and hose with spigot You can find a replacement twist cap here.  The cap has a diameter of ø 60 mm since May 2022Previously the diameter was ø 50 mm

NCC LED Reverse light A116 Extremely flat and compact LED working / reverse light with a depth of only 30 mm. Thanks to the space-saving design and the low cable entry, the headlamp offers the right mounting solution for almost any situation. The illumination is tilted 45° downwards, which means that the headlamp provides perfect ambient lighting even in the case of vertical alignment. In addition to standing and suspended mounting, the headlamp can optionally also be mounted on the backside with retaining brackets or directly on vertical surfaces as ambient lighting and all this with only one headlamp design! The variant AR116 / 500 offers 550 +/- 50 lumen with 12 LEDs with only 8 W power consumption.The variant AR116 / 1000 offers 1.000 +/- 90 lumens with 24 LEDs with only 14 W power consumption. Both versions meet the ECE R23 guideline and can therefore also be used legally as a back-up light in road traffic. Due to the need of high-performance reverse lights, working headlamps have regularly been used as reverse lights (especially in the truck sector), although this is NOT allowed. With the NCC LED AR116 work / reverse light, this has come to an end and possibly fines or even lost insurance protection are a thing of the past. Due to the exchangeable logo, customer-specific designs are possible. Technical specifications:Measurements: 117x32 mmLEDs & Type: 12 or 24 pieces AR116 / 500; AR116 / 1000; creePower: 12/24 VPower at 12 V: AR116 / 500 with 8 W and AR116 / 1000 with 14 WMounting points: 4x M6 and 1x M10Weight: 350 gCertification: ECE R10, ECE R23Material housing: ABSMaterial light disc: PCTemperature range: -40 ° C - + 80 ° CPlug: English DT15-2P or open cable ends Other features:45° downward illumination for optimum ambient lighting only 30 mm depthUniversal 12 / 24V (Multivoltage 9 V - 33 V)durable LED and electronics with 30,000 hours of lifeimpact-resistant plastic housing, with optimum corrosion resistanceimpact resistant and hardened polycarbonate front screenwater- and dust-tight according to IP 68 & IP6K9KRadio and radio interference suppression according to ECE R10 and CISPR 25 Level 5Temperature monitoring and protection against overheating2 m connection cable for free plug assemblyYou can find the perfect mounting for the headlight here. Please note: the protective grilles shown in the pictures are not included in the scope of delivery.

Function stacking is the key to well-designed camping gear and that means several functions are assigned to one piece of equipment. If you already own one of our practical Transformer folding boxes and a wooden lid, you can now turn said lids into sturdy little tables with minimal effort and without taking up any additional storage space. This dual function turns a box set into a mobile dining area in no time at all.   The foldable stainless steel table legs from KoMA.land comply with European standard: i.e. when they are screwed onto the lid of a Transformer folding box, lid and legs fit perfectly into the box when folded in. There’s nothing lying around, nothing has to be stowed away separately and your ancient folding table with the wobbly legs can finally be thrown away. Robust mechanisms in the joints ensure that the legs are securely locked in place when on the move. By the way, the legs are made of high-quality stainless steel, which maximizes both the service life and the set-up height.   Table legs are available in sizes L and M, perfectly corresponding to the lids of the 90L and 48L Transformer box respectively. The legs can also be screwed onto any other lightweight camping table top and are compatible with other Euronorm standard boxes.  Leg length size M: 32cm Leg length size L: 55cm   Available in a set of 4. Wood screws are included.Benefit bundle: Wooden lid with pre-assembled metal feet available HERE in the store    

VIKING PRO XHP50 by ARMYTEK This light belongs in every hunter's backpack. Solid housing with 1" standard housing diameter, fits most underbarrel mounts. It is a powerful and robust tactical torch with all-round light pattern. Additional accessories, such as colour filters and cable remotes, have been designed to allow the torch to be used in a wide range of conditions. - Luminosity up to 1,800 OTF lumens.- Light range up to 370 m.- Up to 200 days runtime with a 18650 Li-Ion battery. Light and Optics Colour temperature: White Maximum output (LED lumen): 2,300 lm LED : XHP50 Optics : Smooth reflector (SMO) Maximum output (OTF lumens): 1,800 lm Light range, metre: 286 m Central field of light: 10 Lateral spread: 80° Operating modes: Number of modes: 9 Running time in highest light level: 1h Running time in lowest light level: 200 days Dimensions and weight Head diameter: 25.4 mm Case diameter: 41 mm Length: 154 mm Weight (without battery): 126 g Housing Max. Immersion depth: 50 m Max. Drop height: 30 m Working range: -25..+40 °C ElectronicsCompatibility with power sources: 1x18650 Li-Ion / 2x18350 Li-Ion / 2xR123 Li-Ion / 2xCR123A Protection against accidental switch-on Coloured battery level indicator Low charge indicator Scope of delivery: Holster with belt loop Carrying clip Hand strap Compat ring made of rubber Spare cap for switch 2 spare sealing rings Operating instructions Battery not included in delivery! (2x18350 Li-Ion available here in the shop) Application noteFor further application information please refer to the product data sheet Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.  

Radiator Cover for Standard Grille The Nakatanenga radiator cover helps your Defender’s engine reach its optimal operating temperature faster during the cold season – improving both engine efficiency and cabin heating performance.   This cover is designed to fit the standard radiator grille (including Heritage style) and all Nakatanenga aluminium grilles of all Land Rover Defender models, with or without air conditioning.   The cover is screwed onto the mounting points of the radiator cover.    For maximum versatility, the radiator cover can be used in three configurations: fully closed, half closed (top or bottom), or fully open.   Manufactured to U.S. military specifications (MIL-SPEC) and according to Nakatanenga’s own high standards. Includes FitKit.

Glow plug connector Land Rover Defender If the diesel has difficulty getting going when starting from cold, and if it nails and smokes particularly badly, this is often due to the glow plugs. Before replacing the plugs, however, you should first check the condition of the cables and plugs. Often, the problem is simply that cables and plugs are exposed through porous plastic sheathing and the electrical contacts are suffering. As a rule, the service life of the plugs far exceeds that of the cable and plug connections, because cables and plugs and their insulation are naturally much more exposed to mechanical and weather-related influences. With our glow plug connector repair kits, Defender with Td5 and Td4 2.4l engines can be very easily retrofitted in case of problems with cables or connectors. This is also recommended if the glow plug set is being replaced anyway. The advantage of the repair kit is that the next time a problem occurs, it is not necessary to replace the entire wiring harness at great expense; instead, it is sufficient to replace the plug and cable up to the crimp connection. This saves time and money and is also no problem for hobby screwdrivers. ATTENTION: Does NOT fit for Tdi and Td4 2,2l. Scope of delivery: 4 plugs

Snow chains for 4x4 - 235/85R16 Suitable for tire size: 235/85R16 TÜV/GS approved Scope of delivery: 2 chains

Hip Bag with many extras It’s not quite clear who invented the fanny pack or bum bag or whatever you want to call it. But in all likelihood, these hip bags can be traced back to the simple pouches skiers wore in the 1970ies. That would make a lot of sense because those neat little items beat every backpack and every other kind of bag when you are out and about without much equipment. Your hands are free and so is your back, giving you freedom of movement in all terrains and also preventing you from sweating through your shirt or jacket. Whether you’re hiking, jogging or walking your dog, our Tactical Bear hip bag supplies enough storage space to carry all your essentials with you. The same goes for bike and boat trips or even for outdoor work or hunting. You will never feel hampered or weighed down, whether you’re wearing the bag as a classic fanny pack around the hips or “gangsta style” diagonally across your chest. Its dimensions of 30x20x12 cm make our hip bag spacious enough for all your essential everyday items. Additionally, we made this pack as versatile and functional as real outdoorsmen and -women expect it to be. The “Tactical” in Tactical Bear is also a clue. Material and workmanship are extremely sturdy – whether it’s textiles like 100% Nylon, zippers, buckles, straps or the belt. As is standard with tactical gear, all components feature many additional functions: Velcro fleece, MOLLE mesh, pockets, rubber straps and an additional Velcro pocket compartment on the inside allow for individual customization, orderly organizing and quick access. Many clever details turn this Bear Pouch into a proper multi-tasker: There’s a loop sewn into the back so that you can put the bag neatly away on a hook once you’re done for the day. We also used lockable zipper sliders so that pickpockets don’t stand a chance when you’re travelling. In one corner of the bag is a small opening for charger cables, headphones and the like. A neat little trick: use it as a dog poop bag dispenser. When you’re walking your dog, push a corner of your dog waste bags through this slit and pull them out as you need them. As easy and comfortable as can be. Speaking of, for a comfy fit and good ventilation, there is an equally light and robust mesh layer on the back side. Underneath the mesh, we’ve integrated a HDPE plate (High Density Polyethylen). This keeps the bag in shape and prevents pointy items from poking you in the back, stomach or chest. The strong nylon belt can be extended up to a length of 1.60m to accommodate for the diagonal carrying style across the chest. If you wear the bag around the hips, simply roll up the loose ends and secure them with the sewn-in Velcro straps to prevent them from dangling or getting in the way. The versatile Tactical Bear hip bag comes in the colors coyote, M90 camouflage, black, MTP or gray-coyote.

Transport Cart for Transformer Boxes Collapsible plastic crates, like the ones people have in their trunks when shopping, are really practical even if they tend to be not very robust. But what if you made them so rugged, versatile and cleverly designed that they meet the standards for heavy duty jobs, expeditions or even military missions? That's exactly what tactical outfitter Outstandards from Virginia thought and that’s how the fantastic Transformer Crates with 48 or 90 liters volume and an astonishing load capacity of 200 kg were born. With such a heavy load, a transport cart is almost indispensable. Outstandards also offer the perfect solution on four wheels for the 48l crate. The ultra-flat hand cart has a telescopic handle that can be tilted and stowed away, lockable wheels and, of course, the robust loading platform with interlocking latches. The hand cart is ideal for 2 to 3 stacked boxes, with the total weight of the load not exceeding 150 kg (approx.). The Transformer folding boxes from Outstandards are available in different colours:         25 litre volume: Ivory and Grey         48 litre volume: Ivory, Black and Olive         90 litre volume: Black and Olive Additional accessories can be ordered separately                 Cooling bag: for 48l box                 Rubber straps: for 48l, 90l box                 Wooden lid: for 25l, 48l, 90l box                 Plastic lid: for 25l, 48l box   <iframe width="560" height="315" src="https://www.youtube.com/embed/N90Tlp5JatI?si=ZUIVcUGBeNgEju4S" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>  

Nakatanenga gift voucher worth €100 Whether for outdoor fans, off-road enthusiasts or Land Rover enthusiasts: There is guaranteed to be something for everyone in our extensive shop. The shopping vouchers can be redeemed for all our goods and services. Immediately after payment, you will receive a high-quality gift voucher in printed form free of charge. For those who are in a hurry:We will also be happy to send you the voucher by e-mail as a PDF file for you to print out yourself. Depending on the payment method, you will then usually receive the voucher on the same day as your order. The vouchers are valid indefinitely.

Professional light for professional work With the portfolio of OSRAM LEDriving Professional Series PX worklights, it is now possible to find exactly the right lighting for a wide range of specialised professional tasks and applications. The total of 16 worklights score points with maximum optical efficiency, effectiveness and homogeneous light distribution. The modular series focuses on the most important aspects of worklight use: illumination, performance, quality, shape, durability, functionality and thus can also result in increased safety at work for you and others. The optimum factors can be selected and prioritised for each specific application, allowing you to create a complete vehicle-specific lighting set-up that is perfectly suited to your individual requirements and needs. The spotlights are suitable for 12V and 24V vehicles and a total of four beam characteristics - flood, spot, wide and ultra-wide - and four output levels - 1500lm, 2500lm, 3500lm and 4500lm - are available for each light. They can also be mounted in three different ways: Direct mounting, flexible standard mounting and heavy duty mounting -  Here too, OSRAM has developed specially designed brackets and a cable with a DT connector. The Professional Series is validated according to the highest IP and IK protection classes IP6K8 and IP6K9K as well as CISPR25 Class 5 and can therefore fulfil the highest OE standards and requirements of the automotive industry. OSRAM grants a 5-year guarantee on these products 1)2) Please note:  ONLY the headlight is included in the scope of delivery!  A mounting kit and connection cable can be found here. 1) Additional worklights without ECE approval for use as worklights are approved for use on any vehicle in accordance with StVZO §52 (7). However, they must not be used when switched on while driving, and individual special regulations and laws of the countries outside Germany must be observed.2) Exact conditions at www.osram.de/am-garantie   Product information PX1500 Ultra Wide Beam PX1500 Wide Beam PX1500 Flood Beam PX1500 Flood Beam Technology LED LED LED LED Nominal voltage 12 / 24 Volt 12 / 24 Volt 12 / 24 Volt 12 / 24 Volt performance 15 Watt 15 Watt 15 Watt 15 Watt Luminous flux 1500lm 1500lm 1500lm 1500lm Colour temperature 6000K 6000K 6000K 6000K Light distance 40m 35m 70m 110m Dimension L :117,1mm/B: 68,4mm/H: 113,4mm L :117,1mm/B: 68,4mm/H: 113,4mm L :117,1mm/B: 68,4mm/H: 113,4mm L :117,1mm/B: 68,4mm/H: 113,4mm Weight  655,00 g 653,00 g 649,00 g 653,00 g Garantie - OSRAM 5Jahre 5 Jahre 5 Jahre 5 Jahre Professional worklights from the PX series can be found in the shop in other luminous flux units / lumens and matching accessories: 2500lm 3500lm 4500lm Zubehör

Optimum illumination for your Land Rover Defender LED lights also offer advantages for interior lighting, like high light output, minimum power consumption, maximum vibration resistance and life expectancy. This is why we have asked a renowned automotive component supplier to produce an interior LED light for the Land Rover Defender for us. Our Nakatanenga LED Interior Light allows easy "plug & play" replacement of the standard interior light (front and back) of your Land Rover Defender. Lamps are sold separately, if you want to replace both lights please order this item twice. The cover and bulb of the existing light (AMR3155) are removed, the adaptor, LED circuit board and the new cover with switch are fitted - that's it, all tool-free and taking no more than 5 minutes! All previous functions of the interior light (on/off/door on) are kept, additionally you can switch to red light, which increases visibility at night. The last colour setting is stored.This is also useful for hunters or when hunting, as game perceives red light much less as an irritation than white light. Keyword eye adaptation: Red light is also used to avoid interrupting the dark adaptation of the eyes, as the eye reacts much more strongly to white light from a lamp, even at low brightness. As some dislike the typical cold-white light of many LED lights, we can also supply a version with warm-white (slightly 'yellower') light output. Unlike many other aftermarket lights, our LED interior light maintains the looks of the original. Can be used both for the front and rear interior roof light. Technical details: light colour (warm-white): 4.500 kelvinlight colour (cold-white): 6.500 kelvinwavelength (red light): 625 nmvoltage: 12 V (not suitable for 24 volts vehicles!)voltage range: 11-18 Vpower drain (at 12.8 V): 0.15 A (white light)power drain (at 12.8 V): 0.05 A (red light) Fits for all Defenders from 1985 to 2016 ATTENTION! The interior light can only be used in combination with the original Land Rover base. Please choose our universal bundle if you want to fit elsewhere or to a different make of vehicle.