Installation service for warm air ducts for ventilation plates for all models The installation of the warm air duct is carried out at the specified fixed price, regardless of the duration.   Please note: The price refers only to the installation flat rate, including the required plastic conduit. The ventilation plates must be purchased separately.   Depending on whether you want to conduct heat from an external mobile heating box into the interior of the vehicle or from the interior of the vehicle via a permanently installed auxiliary heating system into, for example, a roof tent, you can purchase the following items from us:   Ventilation plates for a wide range of vehicles can be found here. Waluflex warm air pipe End piece for Waluflex warm air hose Permanently installed auxiliary heaters can be found here. Mobile auxiliary heater boxes can be found here.   Please note that built-in wind deflectors may need to be removed when installing a warm air duct through a ventilation grille.   When ordering, please provide your telephone number so that we can arrange an appointment. Installation is only possible on site in Berg near Neumarkt (postcode: 92348).   If you order the flat rate together with the appropriate ventilation plate, the item can also be shipped. If you already have ventilation plates, we can perform the installation service by appointment.  

Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016 It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy.  Length 2 slats: 215mmLength 3 slats: 270mm The ventilation plates are available individually, optionally for the left or right window. Please select the sheets according to your windows: If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF)   If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF)   Please note:In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!

Nakatanenga CargoBear cross bars  There’s only one real alternative for the full CargoBear roof rack: the CargoBear cross bars on their own! If you don’t need the entire cargo platform on your New Defender, because you carry only long work equipment or sports gear like surfboards, skis or kayaks, the cross bars alone will do the job perfectly. The same applies for roof tent campers. For the new 110 Landy this means that the standard setup consists of 3 cross beams for the entire length of the roof. The sturdy bars will give you a roof rack that is significantly more robust than any off-the-shelf rooftop carrier. The cross bars are available single or as sets of 2 or 3. They are 100% identical to the ones we sell in the CargoBear kits, i.e. they are 1,450 mm wide (1,300 mm usable) and 120 mm long. The aluminum bars feature stainless steel bases that connect to the standard roof rail via inserted sliding blocks (included). As with the complete CargoBear platform, the bars can be mounted on two height levels, 80 or 100 mm respectively. Choosing the higher level will ensure that your roof window retains its full functionality. The crossbars feature a very wear and tear resistant matte black RAL 9005 powder-coating. A great number of recessed lashing slots allow you to attach lashing rings, brackets, hooks, stud fittings etc. You can also attach your lashing straps directly, of course. The standard CargoBear accessories will also fit the various lashing and mounting points. Thanks to the modular system, this makes a future upgrade to a full CargoBear platform absolutely hassle-free.

Powerful and elegant: Dezent TV black alloy wheel for New Defender and SUV With load capacities of up to 1050 kg per wheel, the Dezent TV black rim is ideal for off-roaders, vans and SUVs.The all-rounder has a particularly balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) protects in winter conditions as well as in everyday or work use.    Diameter : 20    Width : 9    OFFSET : 43    Bolt circle / PCD : 5/120    Finish : Glossy black (3-coat paint)    Weight : 16,5kg    incl. parts certificateAlso available as complete wheel sets with different tyres: Radar Renegade or BF Goodrich All Terrain KO2

Complete wheel set for Land Rover New Defender - Radar Renegade R/T+ on aluminum rim Dezent TV Black Available as set of 4 or 5 complete wheels.   Alloy wheel Dezent TV black for New Defender MY 2020 With load capacities of up to 1050 kg per wheel, the Dezent TV black wheel is ideal for off-roaders, vans and SUVs. The all-rounder has a particularly well-balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) provides protection in winter conditions as well as for everyday or work use.   Rim size: 9x20" OFFSET : 43 Bolt circle / PCD : 5/120 Surface : glossy black (3-layer paint) incl. parts certificate Summer tires Radar Renegade R/T+ 275/55R20 120Q P.O.R. The Renegade R/T+ is the new Rugged Terrain tire range in the Radar Tyres Renegade family. This range is designed to offer exceptional off-road performance with on-road comfort and refinement. On the road, this tire offers the driver superior handling with a smooth and steady ride, while off-road it has the necessary handling of an MT tire. The Renegade R/T+ offers both an aggressive and rugged look with excellent on-road and off-road performance, making it a combination of all-terrain and mud-terrain, offering only the best of both worlds. Vehicle type: SUV/ Offroader Wet grip: B Noise emission: 75 dB Load index: 121/117 (load capacity: 1,450 kg) Speed index: Q (160 km/h) Use: Summer Off-road: yes M+S marking: yes POR marking: yes 3PMSF / snowflake symbol: no Features: Computer-optimized tread block sizes and shapes with multiple lateral grooves and angled sipes provide excellent traction on all terrains. The robust, 3-ply construction reduces the risk of punctures and ensures safe handling on all surfaces. The wide, central tread blocks help balance the weight distribution and ensure that the tread wears evenly. Unique, state-of-the-art stone ejection technology that prevents stones from digging into the tread and becoming lodged there.   The price refers to 4 or 5 complete wheels including fitting and balancing. This item is bulky goods.    

Complete wheel set BF Goodrich All Terrain T/A KO2 275/55R20 115S on Dezent TV black 9x20” ET43 for New Defender Available as a set of 4 or 5 complete wheels.   Dezent TV black alloy wheel for New Defender MY 2020 With load capacities of up to 1050 kg per wheel, the Dezent TV black wheel 20 inch is ideal for off-roaders, vans and SUVs. The all-rounder has a particularly well-balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) provides protection in winter conditions as well as for everyday or work use.       Rim size : 9x20"     OFFSET : 43     Bolt circle / PCD : 5/120     Surface : glossy black (3-layer paint)     incl. parts certificate Tires BF Goodrich All-Terrain T/A KO2 275/55R20 115S BF Goodrich tires meet the expectations of passionate drivers. With BF Goodrich tires, you can easily overcome obstacles and master challenges with ease. This brand is perfect for all road surfaces and weather conditions. BF Goodrich tires offer you good grip and control of the vehicle both on and off-road.   Tire model: ALL TERRAIN T/A KO2 Tire width: 275 Tire cross-section: 55 Tire diameter: 20" Load index: 115 Speed index: S Fuel efficiency: F Wet grip: B Volume: 75 3PMSF: Yes The price refers to 4 or 5 complete wheels incl. fitting and balancing. This article is bulky goods.

Robust complete wheel set for New Defender – Mono-Twin Project AT rims Available as 4 or 5 complete wheel set with different tyre sizes.Alloy wheel Mono-Twin-Project ATFor the Landrover New Defender as an authentic NO FAKE Allterrain rim, which is second to none. This means, beside the real exchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts expertise especially for New Defender, suitable for orig. 20 inch works AT series tyres. For New Defender models with standard brakes no further parts are necessary, only for models with large brakes (Brembo) wheel spacers have to be fitted. Furthermore, optimum offsets to avoid grinding contact on brakes or wheel housing/bodywork and to avoid rework in this respect and to offer a perfect appearance and function even without spacers.The rims are available in satin black or terra.Alloy wheel Twin Monotube Projekt-AT 20 9x20", concave             for front and rear             Offset 40 5x120/72.6             Wheel connection M14x1.5 tapered 60 degrees             Wheel load: 1000 kg             For tyres: 20" series new Defender             Suitable for winter: Yes             incl. parts certificate and wheel nuts Summer tyres Radar Renegade R/T+The Renegade R/T+ is the new rugged terrain tyre series of the Radar Tyres Renegade family. This range is designed to offer exceptional off-road performance while maintaining comfort and refinement on the road. On the road, this tyre offers drivers superior handling with a smooth and even ride, while off-road it has the necessary handling of an MT tyre.The Renegade R/T+ offers a look that is both aggressive and rugged with excellent on-road and off-road performance, making it a combination of all-terrain and mud-terrain, offering only the best of both worlds. This range also features a dual sidewall design, offering riders the design choice of mud-penetrating sidewall with dagger-shaped "Side Biters" or the "Skull & Piston" look sidewall with wedge-shaped "Side Biters". These "Side Biters" provide additional traction and sidewall protection.Tyre data: Vehicle type: SUV Wet grip: B Noise emission: 75 dB Use: summer Off-road: yes M+S marking: yes POR marking: yes 3PMSF / snowflake symbol: no Features: Computer-optimised tread block sizes and shapes with multiple lateral grooves and angled sipes provide excellent traction on all terrains. The robust 3-ply construction reduces the risk of punctures and ensures safe handling on all surfaces. The wide, centre tread blocks help balance weight distribution and ensure that the tread wears evenly. Unique, state-of-the-art stone ejection technology that prevents stones from drilling into and lodging in the tread. The price refers to 4 or 5 complete wheels incl. mounting and balancing. This item is bulky goods.Note: For large brake systems from 363mm ø (D) a track widening of 20mm per side must be used.

Slot nut for gutter/rail for New Defender Slot nut for NewDefender 1x M8 thread Stainless steel suitable for NewDefender Rail

Nakatanenga CargoBear 2.0 system roof rack for Land Rover New Defender from 2020 onwards 110 CargoBear, meet the New Defender! New Defender, meet the CargoBear! Two legends are coming together for the first time: the new Land Rover Defender, arguably the most complete 4x4 off-road vehicle at present, and our tried and tested, very successful modular roof rack system CargoBear. The bear crowns every new Landy, whether it’s a 90 or a 110. At Nakatanenga, we took our time to finetune the CargoBear for every design detail, technical specification and user requirement the Defender L663 (from MY 2020) challenged us with. At its full length of 2.41 m, our rack consists of 3 crossbars, two platform elements as well as front and rear modules. The overall width of 1.20 m gives you almost 3 square meters of fully usable cargo space. The entire surface can be loaded and walked upon – a decisive advantage over many competing products. The CargoBear is screwed into the original mounting points of the roof rails which have to be removed, of course. Another great advantage over the competition is the fact that you can configure the CargoBear rack in two heights: At 100 mm, the glass roof – if you have one –remains fully functional. If your Defender doesn’t have a glass roof or if you prefer a lower, more streamlined profile, the rack can be mounted at only 80mm above the roof. Whether you’re choosing the high or low mount, aerodynamics was always our main concern in the CargoBear’s development. There are no legally required speed limits when driving with the rack, but we recommend a top speed of 160 km/h when empty and 130 km/h when loaded. For the overall load capacity please refer to your owner’s manual and the specific version or configuration of your vehicle. The roof rack’s weight of up to 50 kg has to be deducted from the dynamic load capacity. The new Defender’s overall look is perfectly complimented by the matte black powder coating of both aluminum and stainless steel elements. While the V-shaped rear module accommodates the antenna and the rear view camera and guarantees full functionality, the front element is specifically designed to easily integrate an Osram VX1000-CB or other light bars. New Defender and CargoBear – the ultimate combo for work, holiday or expedition! Material:Crossbars and Platform sheets: aluminum, matte black powder coatingMounting rails: stainless steel, matte black powder coating Further keywords for this item: cargo-bear, cargobear, CargoBear, roof-rack, roof rack

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

GDW hitch bracket with 13-pin Erich Jaeger E set The New Defender L663 (from MY 2019) is not only an extraordinary off-road vehicle, it also packs a remarkable punch. The wide variety of engines from Diesel and petrol to PHEV deliver between 200 and 525 HP and 400 to 650 Nm torque. Its power makes the new Landy the ultimate towing vehicle up to 3.5t towing capacity. And the fact, that the trailer hitch –  whether detachable or electrically deployable –  has to be ordered as an extra, is not really a disadvantage. When configuring your New Defender it’s probably best to skip this feature and get a heavy duty towbar like the one from GDW with its 13-pin electric connector kit by Erich Jaeger. The advantages of the GDW trailer hitch are obvious: A 4-bolt mounting plate will fit the included towball hitch but also any other type of coupling, the GDW coupling block comes at a much more competitive price than the OEM parts. Installation and road use do not need to be technically certified, by the way. The GDW towbar was custom-designed specifically for the New Defender. It comes with detailed assembly instructions and a complete electrics kit. Installing the towbar will take approximately 3 hours. Please note:The GDW towbar may interfere with the sensors of the vehicle’s parking aid. If you rely on this system, you should use the original tow bar. Maximum towing:   3,5 t Maximum vertical load:   210 kg (the maximum drawbar load is specified by the vehicle manufacturer and can be found in the vehicle documents)

Wheel nut for steel rims suitable for New Defender, Discovery 3 / 4. The hard and extremely durable surface finish of these wheel nuts comes from a designated specialist company. The wheel nuts have a double Zintek 300B and Zintek Top treatment and a final black passivation with Techseal Black SL28. Scope of delivery: 23, 5 or 1 pcs

Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.

Sun visors in your car offer few functions beyond the obvious: make-up mirrors for female passengers, maybe, or flimsy card holders for permits, IDs and similar items. We’ve been offering our popular and very successful universal visor organizers for quite some time now and they are the perfect solution to stack the humble visors with additional functions. If you are looking for great, custom-made organizers for both visors in a New Defender, look no further. Simply slip them on, fasten the Velcro straps, done! MOLLE mesh enables you to attach any MOLLE cases or similar compatible accessories. The bands can also hold sun glasses, pens or small flashlights. Two zipper pouches are perfect for all smaller items that are easily lost: coins, keys, remotes, swipe cards and a lot more. A great place to keep your vehicle documents, parking permits etc. is the dedicated slot on the side of the visor. And to top it all off, our textile studio has worked a lot of Velcro fleece into the organizer so that you can attach all kinds of smaller items. The trusted Nakatanenga sun visor organizer is tidy, versatile and allows for quick access to everything that’s important inside a New Defender! Available in the colors black, gray and coyote. Delivery in pairs for driver and passenger side.

Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, LHD The open dashboard design in the New Defender is no coincidence, of course. This is where the impeccably modern cockpit by design director Gerry McGovern and colleagues pays homage to the interior of the classic Defender, the original Landy. Good for us, because we immediately spotted an opportunity to improve storage capabilities: with our nifty dashboard bag for the New Defender. The open dashboard shelf is where you put all the odds and ends in your car. It was like that in the old Landy, it will probably be the same in the new one. But once you’re testing the L663’s tilt angle or maximum gradient, our new dashboard bag, made from easy-to-clean, robust nylon, will keep your stuff from actually flying around. Installing the bag firmly in the dash takes only a few minutes. The zipper has two sliders so that the bag can be opened and shut from both sides. On the inside, mesh compartments and Velcro fleece allow for organized and secure storage of all kinds of items. The front features MOLLE fleece to attach patches and other little things. Since the New Landy sports a designer cockpit, we used transparent plastic material on top of the bag. This allows for the ambient LEDs in the dashboard and the day light from the opening above to filter through into the bag’s interior. The dashboard bag comes in New Landy compatible colors black, gray and coyote. Installation does NOT require drilling, glueing or other damaging methods. It is completely reversible. We include a detailed installation guide. LHD

Dotz Kalahari 8x18" steel rim New Defender, available in 2 colour options A powerful look and great performance make Dotz rims the wheels of choice for many off-roaders. The stunning 8x18 inch aluminum Dotz Kalahari features 8 spokes and – with its all-black or black/polished bi-color design – it gives every New Defender an even stronger stance. And we mean that quite literally: the maximum wheel load of 1.15 tons will serve workhorses, expedition vehicles, camping conversions and other heavy duty 4x4s alike.  Please note: This version of the Kalahari will exclusively fit New Defender L663 with its minimum wheel size of 18 inches. The offset is 30 mm and the tire sizes range from 255/70R18 to 285/60/R18 Delivery includes an EU part certificate.  

Wheel spacers TREKFINDER for LAND ROVER New Defender LE 90/110 ATTENTION: NOT FOR STEEL RIMS - USE ONLY FOR ALUMINIUM RIMS Material made of aluminium, black, hard anodised SCOPE OF DELIVERY: Widening per axle +60 mm / +50 mm / +44 mm / 40 mm millimetres 2 pieces wheel spacers incl. mounting material 1 piece TÜV® parts certificate Assembly instructions Care and cleaning instructions Scope of delivery for 1 axle AREA OF APPLICATION: Vehicle manufacturer: Jaguar Landrover (GB) / 1590 Vehicle type: LE Trade name: Defender ABE-EG number: - e5*2007/46*0092* . . - e5*2007/46*0125* . . The use of wheel spacers is permitted for the following wheel sizes/rims/references: NOTES and REQUIREMENTS: A1) The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are of sufficient length.The screwed-on spacer rings are fastened to the vehicle with the fastening elements supplied by the manufacturer of the spacer rings (taper collar wheel nuts).The standard wheels are fastened with the standard fastening elements.It is particularly important to ensure that the length of the stud bolts in the spacer rings (free thread length above the wheel contact surface) corresponds to the length of the standard stud bolts, in this case approx. 28 mm (VA/HA). H1)The usability of snow chains was not checked. H2)There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met:Separate suitable certificates for the wheel/tyre combinations are available and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.If other wheel/tyre combinations are used, their suitability (clearance, handling, etc.) must be checked or proven separately.Use of the spacer rings on the front and rear axle or only on the rear axle.There are no technical objections to the additional use of tested chassis lowering or raising (with parts certificate or ABE).In the case of chassis lowering with non-standard end stops, the suitability of the conversion must be checked or proven separately.Use of the spacer rings on the front and rear axle or only on the rear axle. Furthermore, it is possible to combine spacer rings with different widths on the front and rear axle. For example:Axle 1 spacer rings with 20 mm width and axle 2 spacer rings with 30 mm width.Always use wider spacer rings on axle 2 than on axle 1. H3)All fastening elements must be checked with a suitable torque spanner after approx. 100 km of driving. H4)The instructions in the manufacturer's installation manual for the spacer rings must be observed.The installation of spacer rings is not permitted if the diameter of the spacer rings is smaller than the diameter of the wheel contact surface of the wheels.The spacer rings are not permitted in conjunction with steel wheels. H5)With regard to the track width change of more than + 2%, a laboratory report on the sufficient operational stability is available and deposited ( you do not need to bother ):No. 21-00075-AS-MUC-00 / 10.08.2021 / TÜV SÜD Auto Service GmbH. H6)The bolted 20 to 30 mm wide spacer rings are tested up to a wheel load of 1000 kg. H7)Also permissible with standard wheel/tyre combinations with tyre code LT. H8)Only in conjunction with LM wheels with corresponding "casting pockets" which can accommodate standard stud bolts or nut heads protruding beyond the wheel contact surface.The standard stud bolts may have to be shortened.The minimum screw-in length of all fastening elements of 7.5 turns must be maintained.  

Coupling rod/ Rods for height adjustment Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride height of the New Landy by 1 or 1,6 inches takes very little in terms of effort or budget. The principle is very simple and has been employed with Discovery 5 and Range Rover Sport models for quite some time. Simply replace the original rods on all four wheel suspensions with our replacements. The new rod’s different dimensions will trick the self-regulating suspension to permanently lift the ride by 1” or 1,6”, respectively, in all drive modes. Once the new lift rods are installed, the vehicle’s sensor system will adjust itself automatically to the new ride height after the first restarting of your car. Resetting the ride to original factory settings is just as easy and only a question of minutes. We produce these 1“ and 1,6“ lift rods for the New Defender in our own workshop. The rods are laser machined from extremely robust high-quality plastics and the bushings are created in an additive process. This makes both components highly resistant to degradation by weather or chemicals, like fuel, oils etc. The custom-designed bushings are flexible and extend to both sides of the rods’ connections. In terms of quality, this is a far superior solution over many other products on the market, specifically aluminum rods with cheap off-the-shelf cable grommets. Available as +1“ or + 1,6“. Caution: these products are without part certification and are not road legal. They¬¬ may not be used on public roads.

Switch panel for New Defender from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.