EXTREMEspec release bearing strong and reliable The EXTREMEspec release bearing has been made not only strong and reliable, but also durable by adding a simple feature that allows grease to be used on the surface of the guide tube. Oil rings keep the grease in place and protect it from contamination. This grease barrier not only protects the release bearing, but also the guide tube itself. It also minimises clutch release bearing rattling, a common problem that causes a loud rattling noise at idle due to lack of grease and poor design tolerances. Fits 2.5NA Millitary transmissions and Stumpy R380 from Ashcroft Transmissions

Heavy Duty Clutch Kit for Land Rover Defender TD4 Especially with switching operations under higher load, such. in trailer operation or in performance-enhanced vehicles, enormous forces must be transmitted by the clutch. A common problem with the Defender's original clutch is the failure of the insufficiently sized torsion springs. The torsion springs, which are specially adapted to the Defender Td4, eliminate the familiar problems with clattering or jamming couplings. Another, but less common problem is the ingress of oil from the engine or transmission into the clutch bell. This oil is absorbed by the porous friction linings and occurs during driving by the resulting frictional heat repeatedly to the friction lining. Due to the reduced traction it comes in the episode to a higher heat development and vitrification of the coverings. The heat is a measure of the converted energy that is no longer available to the drive!The organic coating used in this coupling can not absorb oil and therefore does not vitrify. It convinces with specially adapted friction modifiers with a soft response and enables a 100% adhesion. Of course, the pads are asbestos- and lead-free, free of other toxic heavy metals and heavy metal compounds. Complete set consisting of automatic clutch, friction disc and release bearing. Clutch kit with clutch slave cylinder for Defender TD4 from year of construction 2007-2016 We recommend replacing the pilot bearing when replacing the coupling.Please note:  Before installing the clutch, the following dimension must be measured on the flywheel If the dimension is 25.4 mm, the clutch can be installed. If the measurement is 22.2 mm, a Ford flywheel is installed. The clutch is not compatible with this and will malfunction sooner or later. If a Ford flywheel with a measurement of 22.2 mm is installed, you will also need the following Land Rover flywheel.

Snorkel for Defender 300 Tdi, Td5 and Td4 Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, fitted to right-hand side. Material: aluminium, black powder coatedDiametre: 80 mmComes with cyclonic head and stainless fitting material for snorkel. Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.

Tuning Bundle - Land Rover Defender TD4 2.4 Successful performance tuning is always achieved by an interplay of various parts - at least air intake, engine and exhaust system. Thus we've assembled a tuning-bundle for Land Rover Defender TD4 2.4 MY2007-2011 at a price advantage - it consits of: K&N performance air filter TD4 with fitting Chiptuning to 175 PS deactivation of speed limiter deactivation of EGR (engine gas recirculation) high-performance intercooler with fitting de-cat pipe with fitting Please note that these products have no TUV approval for Germany and thus can not be used on public roads in Germany. Fitting takes place by appointment at our premises. Your vehicle should be at our workshop by 10am and is usually ready by 5pm. For the fitting period we can supply a courtesy car. Due to the special package price you will save up to EUR 180,- compared to the individual prices! After placing the order our staff will contact you to make an appointment. Please give your telephone number when ordering. Please place your order in time, we have a lead time of four weeks for workshop appointments. Fitting only possible at our premises at Berg bei Neumarkt (post code: 92348).