Driving Lamp
Nakatanenga Lamp Bracket for Land Rover Defender with 4 LED Spotlights Round
Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted suspended) - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting. The one-piece bracket is made entirely of stainless steel and powder-coated in black. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details. The bracket is equipped with four round Vision-X Cannon 25 W LED spotlights, which have an E-mark. A total luminous flux of 10,000 lumens is generated from one 25 W Luminus LED per lamp (raw), the power consumption is only 2.1 A (at 12 V), the lights are multi-voltage capable (9-32 V). All luminaires have a narrow, far-reaching illumination to the front. If you require a different light characteristic (e.g. wide beam) or a different light colour (e.g. yellow for fog or blue for snow), please order the optional add-on filters. Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation, we recommend the Aquasignal cable gland for the roof (so that the light bar remains easily removable) as well as our power distributor with fuse holder. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:
Prices incl. VAT;
Osram LED Lightbar MX250-CB with PL, auxiliary headlamp
Osram LED Lightbar MX250-CB with PL, auxiliary headlamp with approval Remarkable visibility on dark country roads, forest tracks and off-road, on-road and off-road - this is what you can achieve with the OSRAM LEDriving Lightbar MX250-CB. With 26 long-life high-performance LEDs, the OSRAM LEDriving Lightbar MX250-CB achieves a range of up to 320 metres and can thus help the driver to achieve impressive far-sightedness on the road and off-road. Even in twilight and with reduced visibility due to external environmental influences, the OSRAM LEDriving Lightbar MX250-CB with up to 6.000 Kelvin for conditions similar to daylight. The powerhouse with up to 2.700 lumen luminosity scores with highest optical efficiency and homogeneous light distribution. This results in improved visibility for you and improved visibility of your vehicle by other road users, consequently also increased safety on-road and off-road.Whether on-road or off-road - the OSRAM LEDriving Lightbar MX250-CB impresses with its performance and a service life of up to 5.000 hours. Combo Beam - Designed for both far-field and near-field illumination PL - Position light approval ECE Certification - ECE R112 (driving lamp approval) ECE certification - ECE R7 (position light approval) up to 320 m long beam ECE reference number: 30 must be installed in pairs as approved driving lamp (two-lane vehicles) combined illumination for near and far field Application noteFor further application information, please see the product data sheet
Prices incl. VAT;
New Defender integration kit for the roof - carbon cover with 2x Vision-X XPL LED Light Bars.
XPL Carbon Roof Cap Kit is a high performance lightbar solution for the roof Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The XPL Carbon Roof Cap Kit by Vision X is an elegant and extremely powerful LED lightbar solution for the roof of new Defenders from MY 2021. The aerodynamically shaped carbon element holds two Vision X XPL Lo Pro light bars. The array of CREE LEDs produces 45 W per bar and a beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL light bar also features backlighting that can be used as daytime running lights. The installation on the roof is minimally invasive. The mounting kit contains a drill template, all required fastening and sealing materials as well as the electric connections. Specifications XPL Lo Pro Lightbars: LEDs: 5W per LED Housing material: Aluminum Light color temperature: 6000 Kelvin Voltage: 9-32V DC Current: 0.75A~7.5A@24V DC - 1.25A~15A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Dual mounting standard Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, E mark IRIS reflector technology The XPL is equipped with a backlit halo that can be used as a daytime running light. (SAE compliant for 20" and below). Scope of delivery: Complete carbon element with two XPL-H9 light strips, brackets and wiring harness including precise fitting drilling template.
Prices incl. VAT;
Vison-X Cannon GEN2 6.7 inch Single LED 50W
Vision-X GEN2 Cannon 6.7 inch 50W LED headlamp, selectable individually or as a pair with cable set. Multi LED for maximum light output! This headlight scores with a powerful and wide main beam pattern and extreme range. THERMAL MANAGEMENT SYSTEM Advanced circuitry and an aluminium heat sink ensure maximum light output during extended use. WEATHERPROOF PLUG The Deutsch plug ensures the functionality of every Light Cannon even in the harshest conditions. ADJUSTABLE AIMING SYSTEM The steel trunnion mount offers 45° light adjustment and is secured by a robust 4-bolt locking system. Technical data: Range approx. 550m ECE R112 approval as a driving lamp LEDs: 50 W Housing material: hybrid Colour temperature: 6000 Kelvin Dimensions: 167 / 180 / 136 mm Weight of one headlamp: 1.3 kg Voltage: 9-32 V DC Current rating: 2.92A@24V DC - 5.83A@12V DC Vibration Rating: 21.2 Grms Lens material: Acrylic Certifications: CE, RoHS, IEC 62471 IP68 / IP69K
Prices incl. VAT;
Osram LED MX180-CB 7'' round with PL, auxiliary headlamp
Osram LED MX180-CB 7'' round with PL, auxiliary headlight with approval Remarkable visibility on dark country roads, forest tracks and off-road, on-road and off-road - this can be achieved with the OSRAM LEDriving Round MX180-CB. With 12 long-life high-performance LEDs, the OSRAM LEDriving Round MX180-CB headlamp achieves a range of up to 300 metres and can thus help the driver to achieve impressive far-sightedness on the road and off-road. Even in twilight and with reduced visibility due to external environmental influences, the OSRAM LEDriving Round MX180CB headlight can provide conditions similar to daylight with up to 6.000 Kelvin. The power pack with up to 3.000 lumen luminosity scores with highest optical efficiency and homogeneous light distribution. This results in improved visibility for you and improved visibility of your vehicle by other road users, consequently also increased safety on-road and off-road. Whether on-road or off-road - the OSRAM LEDriving Round MX180-CB headlight impresses with its powerful performance and a long service life of up to 5.000 hours. Combo Beam - Designed for both far-field and near-field lighting. ECE Certification - ECE R112 (driving lamp approval) ECE certification - ECE R7 (position light approval) Up to 300 m long beam ECE reference number: 25 must be installed in pairs as approved driving lamp (two-lane vehicles) combined illumination for near and far field Application note For further application information, please see the product data sheet
Prices incl. VAT;
Vision-X GEN2 Cannon 6.7 inch 126W Multi LED, driving lamp
Multi LED headlights for maximum light output! Technical data: LEDs: 18 x 7 W (126 Watt) Light colour temperature: 6,000 Kelvin Voltage: 9-32 V DC Current: 5.25 A @ 24 V DC - 10.5 A @ 12 V DC Dimensions: 167/180 / 136.3 mm Housing material: hybrid Lens material: Acrylic IP-68 Certification: CE, RoHS, IEC 62471
Prices incl. VAT;
Vision-X Explorer Xtreme Prime LED worklight
Vision-X Explorer Xtreme Prime LED worklight If the question is for a lot of light in a compact design, the Explorer Xtreme Prime range is the answer - in square 4" design or classic 6" round design, a single spotlight emits up to 5,423 lumens - or less if required, as they are adjustable via an optiional dimmer. Depending on the lighting requirements, there is a choice of 9 (square design) or 11 (round design) LEDs, as well as 10°/25°/40°/60° or 30/65° illumination. In the NACTL-EPX-910 version (i.e. 4" square with 10° illumination), the Explorer Xtreme Prime has an E-mark when used in pairs as a driving lamp.Product features: robust die-cast aluminium housing scratch-resistant polycarbonate lens 105° adjustable bracket Vertically arranged ribs for optimised heat dissipation low power consumption (only 45 or 55 watts) waterproof according to IP68 standard 9-32V multi-voltage capability Integrated thermal management Prime Drive technology adjustable via optional dimmerTechnical data:Article number Number of LEDs Lumen Illumination Dimensions Power consumptionNACTL-EPX-910, with E-mark 9 4,437 lm 10° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-925 9 4,437 lm 25° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-940 9 4,437 lm 40° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-960 9 4,437 lm 60° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-93065 9 4,437 lm 30/65° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-1110 11 5,916 lm 10° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1125 11 5,916 lm 25° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1140 11 5,916 lm 40° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1160 11 5,916 lm 60° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-113065 11 5,916 lm 30/65° 182x174x81 mm 4.6 A / 12 V The price refers to one piece. For operation according to StVZO, two copies of the NACTL-EPX-910 must be installed. Please select the desired configuration.
Prices incl. VAT;
J.W.Speaker TS3000V LED spotlight
Powerful spotlight for maximum visibility With the TS3000V LED spotlight, J.W.Speaker has launched a high-end LED spotlight in an oval design that can be used both on the road (spotlight) and in rally applications (spotlight). The price refers to one unit. Technical data: suitable for 12V and 24V Scratch-resistant polycarbonate or glass lens Extremely robust housing made of die-cast aluminium Available with black or silver housing integrated socket for German plug spotlight with E-mark (ECE 112) Spotlights without E-mark Waterproof to IP67 standard Dimensions: 167 mm (width) x 160 mm (height) x 106 mm (depth) Supplied with black cover and wiring harness Transparent or coloured covers optionally available
Prices incl. VAT;
Driving Lights: Maximum Visibility for Off-Road & Demanding Routes
When your vehicle's standard high beams reach their limits, that's where driving lights come into their own. Especially during night drives in off-road terrain, on remote country roads, or during expeditions into unfamiliar territory, superior visibility is not just convenient, but a crucial safety factor. At Nakatanenga, discover a selection of powerful auxiliary lights, specifically chosen for the robust demands of 4x4 use, that turn night into day.
Why Driving Lights (Auxiliary Lights) Are a Must:
- Extreme Range: Compared to standard high beams, high-quality driving lights often illuminate the path hundreds of meters further. Spot obstacles, wildlife crossings, or the course of the track significantly earlier.
- Increased Safety: More visibility means more reaction time. Driving at night becomes safer and more relaxed, especially on unclear paths or at higher speeds (where permitted).
- Optimized Light Distribution: Many modern LED driving lights offer a focused light cone (spot beam) that targets the distance, often supplemented by some side spill for broader peripheral awareness.
- Robust Construction: Our driving lights are built for tough use: shockproof, vibration-resistant, waterproof, and dustproof (according to IP ratings) with durable housings and lenses.
- Modern LED Technology: Benefit from the high efficiency, enormous light output, long lifespan, and daylight-like white light of LED driving lights.
- Versatile Options: Choose from classic round driving lights or modern LED light bars in various sizes and power levels – the perfect solution for your vehicle and needs.
Important Note on Use and Approval:
The use of driving lights on public roads is legally regulated. They can typically only be switched on together with the vehicle's main high beams, and the maximum permissible total light intensity must not be exceeded. Many of our models carry an E-mark, confirming their basic suitability as automotive lighting equipment (see product description for details). However, the primary application for maximum performance is often in the off-road sector or outside public road traffic regulations.
Nakatanenga Quality: Light Performance That Convinces
We at Nakatanenga know what matters when it comes to off-road lighting. That's why we only carry driving lights from reputable manufacturers that have proven themselves through outstanding performance, quality, and durability. Trust our careful selection for your safety and driving experience.
Expand your horizons at night! Discover our selection of powerful driving lights now and equip your vehicle for maximum visibility.