Efficient wiring: Control up to 8 consumers centrally and wirelessly Converting your 4x4 into a camper van or a utility vehicle is a tricky job, nearly impossible to plan in all its details from the outset. Only with time you’ll realize where switches should have gone or that an additional lamp or ancillary device could have been put somewhere else instead. Or there are safety regulations that prevent you from wiring certain switches into your dashboard, e.g. work or camping lights that mustn’t be switched on inadvertently while driving. And that’s when you simply decide to live with the compromises and inferior solutions because you simply dread the thought of having to re-wire everything. If you know this situation, the Wireless Connect RSU60 by Ring is for you. It lets you wire up to 8 devices easily and quickly into the tech hub, a centrally located connector panel, without the need for separate wiring of switches. All connected devices like lamps, gadgets and mechanisms are operated wireless by one remote control, wherever it is convenient. This comfortable and efficient system saves you time and materials and spares your nerves as well when something goes wrong or stops working. Faulty connections or other glitches can be easily traced from the one central tech hub, eliminating the need to take half the car apart as with hardwired solutions fitted behind dashboards and paneling or inside struts or conduits. The 12 V tech hub boasts a maximum ampage of 60 A and is designed for parallel operation of several devices. All connections are individually fused and a manual override guarantees additional safety. Moreover, battery protection ensures that battery voltage is constantly maintained and depletion is prevented. The remote switch buttons can be allocated as necessary and individually identified by an included set of stickers with different icons. The remote also features user-friendly backlit illumination, status lights and a sleep mode. Pairing the remote with the hub is as simple as pressing two buttons and unique signal pairing means that you can operate the same functions on the hub with two remote controls, one in the cabin and one in the back for example. This increases both comfort and safety. The remote is kept and charged in an included docking station.

This CB mobile antenna scores with good SWR values - the fine-tuning of the SWR values is done by rings. Technical data: CB mobile antenna 1/4 lambda 120 channels Power rating: 40 watts Material: Stainless steel SWR Adjustable YES Length: 115 cm Cable length: 4 metres For fixed mounting The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio, you still need a PL259/6 plug for RG58 coaxial cable.

Bracket for CB antenna / radio antenna for Nakatanenga CargoBear system roof rack This robust bracket was specially developed for mounting a CB or radio antenna on CargoBear system roof racks. It is made of high-quality stainless steel and is powder-coated in black for additional corrosion protection and an attractive appearance. Ideal for off-road enthusiasts, long-distance travellers or professional use - with this mount you can securely and stably attach your antenna to the vehicle.Product details:  Suitable for all CargoBear 1 and 2 roof rack systems  Made of rust-free stainless steel  Surface: black powder-coated  Resistant to weather and mechanical stress  Simple and secure attachment  Can be used universally for various CB or radio antenna models Scope of delivery:1x antenna holder (without antenna)Note:The delivery does not include the antenna. The indicated price refers to one piece.

Alan PL259/6 plug, for RG58 coaxial cable PL259/6 plug, double pack, for assembling RG58 antenna cables.Required for the Alan ML130 and Alan ML145 magnetic antenna.

Permanently good reception with the CB fixed mounting antenna The 1/4 lambda antenna is easy to mount and offers a wide bandwidth incl. DV connection. It consists of a stainless steel radiator with flux points and a wing nut. The standing wave ratio is preset and can be changed by changing the radiator length. Mounting instructions: Drill a hole with a diameter of 12 mm at a point on the vehicle body.Deburr the hole and ensure a good conductive connection of the antenna flux.Then insert the antenna base from the outside of the body into the hole so that the corrugated side of the antenna joint faces the outside of the vehicle. Fit the plastic washer and the metal trident washer the right way round. Fit the toothed washer and screw on the nut loosely After aligning the base, tighten the nut on the inside of the body with a spanner Screw on the angle plug with the antenna cable (tip: seal with silicone to permanently seal the mounting point against rust) Mount the radiator with the threaded bolt on the antenna base Technical data: Frequency: MHz 26-28 Type: 1/4 Lambda Power rating: 300 W Radiator length: 130 cm Steel material: Stainless steel SWR Adjustable - SWR adjustment via length change: SWR preset Special features: Plug type DV Total length with base: 138 cm The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.

Magnetic base antenna for CB radio, approx. 145 cm long. Technical data: Type: 5/8 LambdaPower rating: 200 WLength of steel: 148 cmRadiator material: stainless steelMagnetic base: 120 mm diameterThe antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.