Door Hinge Set, all Defender, front and rear

Retaining clip / bonnet bar Plastic clip bonnet bar for Land Rover Defender Td5 and Td4 up to year of construction 2016 suitable for bar diameter 8mm

Defender door hinge assembly kit, stainless steel (black) The classic Defender’s original door hinges usually become a nuisance sooner or later - they wear out, turn rusty and leave streaks down the paintwork. Our precision-manufactured replacement hinges made of black anodized aluminum provide a permanent remedy, especially in combination with our custom mounting kit. The complete set of screws, nuts, washers and retaining clips is made of stainless steel and is therefore guaranteed to stay rust-free. The fastening materials are specifically made to exactly fit these hinges, thereby preventing contact corrosion between steel and aluminum parts. The screws’ black coloring also ensures a seamless off-road look on your Landy. Please note: The mounting kit does not fit the original Land Rover hinges.  

Washer pump including grommet Suitable for Land Rover Defender MY 87-98 without air conditioning

Stainless steel screw set for Land Rover Defender 90 SW / 90 HT / 90 Softtop Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us. The screws' heads are identical to the original Defender screws!!! Fits all model years - TDi, TD5, TD4 2.4, TD4 2.2 Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

Stainless Steel Screw Set for Land Rover Defender 110 SW / 110 CC / 130 CC EXCLUSIVELY manufactured for us in ORIGINAL Land Rover style.The screw heads match the original Defender screws in shape and appearance! The complete set contains more than 440 parts. It allows the externally visible screws on the vehicle to be replaced with high-quality, corrosion-resistant V2A stainless steel screws. Especially on older Defenders, this gets rid of unsightly rusty screw heads while retaining the characteristic original appearance. Suitable for all model years – TDi, Td5, Td4 2.4 and Td4 2.2. A particular highlight: the screws for the side-door and rear-door hinges as well as the rear body mounting screws are manufactured specially for us and match the shape of the original Land Rover screws, including the Torx drive. Specially manufactured bonnet buffer screws are also included in the set. With more than 440 parts, organisation matters. That's why the screws are clearly sorted into 10 separate bags according to the relevant area of the vehicle. The set includes screws for the following areas: rear door hinges rear body mounting radiator grille load-area trim + reflectors bonnet hinges rear crossmember spare wheel carrier headlight surrounds + wing covers side door hinges inner door sills + A-pillar 2x bonnet buffer screws anti-seize paste Installation is generally straightforward and can also be carried out by competent DIY mechanics without specialist workshop equipment. The clearly sorted packaging makes it easy to identify which screws belong to which area of the vehicle. Anti-seize paste included:The set includes anti-seize paste for installation. When replacing such a large number of fasteners with stainless steel screws, this is simply part of a properly thought-out kit. Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB). Depending on the vehicle and installation situation, the door hinge screws may need to be shortened. The individual sub-sets contain some additional screws to cover different vehicle versions and accessories. It is therefore possible that some screws will remain unused after installation.

Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us The screws' heads are identical to the original Defender screws!!! Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads). In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

Robust hinge pins for ventilation flaps Suitable for all Defender up to MY 2007Material: Stainless steelThe set consists of 4 bolts and 10 nuts (incl. 2 spare nuts).Please note: This set is not included in our stainless steel bolt set!

Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3 Enhance the appearance of your Land Rover! Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III. These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.

Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.

Repair kit for tailgate hinges screwed version1 set, see pictureOnly suitable for hinges with screwed bolts.Does not fit hinges with pressed bolts.

Hinges for Defender bonnet Nakatanenga bonnet hinges for Land Rover Defender (all models, all model years) address two problems associated with the original hinges: for one they are more durable and have no play, additionally they greatly complicate bonnet theft. We have put emphasis on ease of fitting - this can be done by yourself. There are no holes that need drilling as only existing ones are used, all fixings, icluding the special safety-socket are supplied. The hinges are available in stainless steel or with black powder coating, please choose the desired finish.

Screw set bonnet Land Rover Defender optionally for Tdi /Td5 and for Td4   Defender bonnet screw set includes 2 front bumper screws, six stainless steel hinge screws with washers and nuts and two plastic hinge bushes   The screws are supplied as hex socket screws.