Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, various colors

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

CargoBear storage rack for Land Rover New Defender L663 The more space you have, the greater the temptation to simply deposit your gear all over the place. With a cargo giant like the new Defender 110 (from MY2020), this will inevitably lead to chaos. That's why we’re putting a bear in the cargo area, a small CargoBear. This additional shelf with its generous dimensions of about 860 x 525 mm takes a load of about 50 kg and is intended for heavier equipment, tools etc. As with the CargoBear roof rack, the cargo shelf is made of robust, powder-coated and perforated aluminum. Raised edges, anti-slip surface and a variety of lashing points make it very easy to ensure one hundred percent load security. By the way, the angled design of the supports leaves approx. 640 mm of loading height under the CargoBear rack. This means that even larger items such as boxes etc. can still be stowed without a problem. When mounting the shelf, all you need to do is fastening it to the existing attachement points of the trunk cover with the original screws. Only the hooks on the original trim have to be removed – making installation or removal a matter of minutes. - Material: aluminum, black powder-coated- Max. Load capacity: up to 50 kg Please note: The storage rack is NOT suitable for the  90, 110 Defender with 7 seats (as the belt system blocks the side panels), 130.

Switch panel for New Defender from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.

The new Defender combines modern technology with proven off-road capability. Good air circulation as if the windows were slightly open, but without the risk of rainwater or theft? Plus effective protection against insects? That's what our ventilation panels with mosquito nets offer, made to fit the New Defender perfectly from high-quality aluminum—no wobbly universal parts. Supplied in pairs and powder-coated in black, they complement the modern design discreetly and sensibly, especially when camping or on expeditions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Suitable for Defenders built from 2020 onwards. Length: 550 mm  

Seat cover for Land Rover New Defender 110/130, driver and passenger side This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop  – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture. To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls. As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently. Our seat protectors come in the colors Coyote or black with uni-colored mesh insets. Material: Nylon, PU-coated Not suitable for New Defender 90 or the version with a 4-way adjustable headrest! The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever.  This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Bumper protection in different colours What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper? Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects. Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee. The protective wrap is available in black, matt black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme. Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer. Available in Black, Matt Black, Anthracite, Silver or Matt Transparent*, the protective film perfectly matches the look of the new Defender, regardless of its paint finish or colour scheme. Please note:The transparent version differs from the other versions in terms of price and workmanship, as it uses a specially developed, UV-stabilised film. This film is specifically designed to minimise material yellowing caused by UV radiation and ensure long-term visual stability.The transparent film MUST be applied wet! For professional application, we provide detailed installation instructions and the necessary processing materials. Instructions for wet application: Fill a spray bottle with water and 1–2 drops of washing-up liquid (or mounting/application solution). Remove coarse dirt from the loading sill with a damp cloth and then clean thoroughly with the enclosed cleaning cloth – the surface must be clean and dust-free. Spray the loading sill evenly. Remove the protective film from the film and also spray the adhesive side lightly (so that it does not stick immediately). Apply the film and align it carefully. The moisture allows it to be moved around. Squeegee out the water, working from the centre outwards. Apply even pressure to remove the water and air bubbles. Remove any excess liquid with a cloth. The film is fixed after squeegeeing, but only reaches its final adhesion after 24–48 hours.   During this time: Do not wash, do not use a high-pressure cleaner. Keep as dry as possible and avoid mechanical stress.    

Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.