Das könnte Sie auch interessieren
Installation service for warm air ducts for ventilation plates for all models The installation of the warm air duct is carried out at the specified fixed price, regardless of the duration. Please note: The price refers only to the installation flat rate, including the required plastic conduit. The ventilation plates must be purchased separately. Depending on whether you want to conduct heat from an external mobile heating box into the interior of the vehicle or from the interior of the vehicle via a permanently installed auxiliary heating system into, for example, a roof tent, you can purchase the following items from us: Ventilation plates for a wide range of vehicles can be found here. Waluflex warm air pipe End piece for Waluflex warm air hose Permanently installed auxiliary heaters can be found here. Mobile auxiliary heater boxes can be found here. Please note that built-in wind deflectors may need to be removed when installing a warm air duct through a ventilation grille. When ordering, please provide your telephone number so that we can arrange an appointment. Installation is only possible on site in Berg near Neumarkt (postcode: 92348). If you order the flat rate together with the appropriate ventilation plate, the item can also be shipped. If you already have ventilation plates, we can perform the installation service by appointment.
Prices incl. VAT;
Wear kit with tank extraction and exhaust pipe for AUTOTERM Air 2D / 4D For our portable heater boxes, we only use AUTOTERM (previously Planar) Diesel heaters. After assembly, we are usually left with unused accessories and spare parts from the original AUTOTERM delivery, so we decided to bundle them as wear and tear replacement kits for only 20 € incl. VAT. That’s a massive price reduction of nearly 70% when compared to the individual value of these spare parts.The sets will fit AUTOTERM 2D and 4D air heaters and consist of one fuel pick-up tube, one fuel line, one exhaust pipe including heat insultation and various pieces of fastening materials. These are essential spare parts and replacements to keep handy in case of damage or wear and tear.
Prices incl. VAT;
Durable 90° Stainless Steel Heater Bracket for Parking Heaters This high-quality stainless steel heater holder with 90 ° angle fits the following auxiliary heaters: Planar 2D parking heater Planar 4D parking heater Planar 44D auxiliary heating only with the same flange pattern: Webasto & Eberspächer
Prices incl. VAT;
Exhaust silencer for AUTOTERM (=Planar), Binar, Eberspächer parking heaters This stainless steel exhaust silencer is suitable for all parking heaters (air heating and water heating) with a 24 mm exhaust pipe.Suitable for the following heaters: AUTOTERM Air 2D and AUTOTERM Air 4D (formerly Planar 2D, Planar 44D), AUTOTERM Flow 5D (formerly Binar 5D). Eberspächer AirtronicAs the Webasto heaters have a 22 mm exhaust pipe, this silencer does not fit.Dimensions: Outer diameter connection: 24 mm Total length: 18 cm Length of silencer without connections: 14 cm Diameter: 40 mm (additional 2 cm fastening device)
Prices incl. VAT;
Module for 12 Volt AUTOTERM parking heaters With this module and a suitable radio remote control, you can control AUTOTERM (Planar 2D12 and Planar 44D12) parking heaters. You need the module to assign the parking heater to a channel of a radio remote control. You can thus switch the parking heater on and off by remote control. A connection diagram is included in the scope of delivery.
Prices incl. VAT;
Vibration damper for parking heaters Vibration damper for additional decoupling of the feed pump of a parking heater. Ideally suited for our AUTOTERM 2D and 4D (formerly Planar 2D and Planar 44D) parking heaters.Technical data:Diameter: 25 mmHeight: 20 mmThreaded bolt: M6x18
Prices incl. VAT;
Warm air pipe 75mm for AUTOTERM Air 4D (=Planar 44D) parking heater Warm air pipe / flexible pipe / air pipe / warm air hose for effective distribution of warm air. The warm air pipe is optimised for the parking heater AUTOTERM Luft 4D (formerly Planar 44D). However, it is also suitable for Webasto, Eberspächer and Truma heaters.The warm air pipe is supplied according to current stock, so you could get one in black or in brown. Colours: inside silver and outside either black or brownInner diameter: Ø 75 mmPrice per running metre, delivery in whole metres only.
Prices incl. VAT;
Ähnliche Artikel
Spare part -> Attachment fuel pump for Autoterm air parking heaters 2D and 4D AUTOTERM Air 2D AUTOTERM Air 4D Material: solid rubber (with metal sleeve for attachment)
Prices incl. VAT;
Durable 90° Stainless Steel Heater Bracket for Parking Heaters This high-quality stainless steel heater holder with 90 ° angle fits the following auxiliary heaters: Planar 2D parking heater Planar 4D parking heater Planar 44D auxiliary heating only with the same flange pattern: Webasto & Eberspächer
Prices incl. VAT;
Adapter / Reducer 90-60 and 75-60 Warm Air Pipe for Parking Heaters With this adapter or reducer you can reduce the warm air duct of a parking heater from a 90 mm warm air pipe to a 60 mm warm air pipe.The 75-60 adapter is intended, for example, to connect a 75mm warm air pipe with a 60mm connection piece.
Prices incl. VAT;
Manifold T-piece for 75 mm hot air pipes - ideal for AUTOTERM & similar systems T-piece suitable for warm air ducts of Planar 2D auxiliary heaters and other independent vehicle heaters with 75 mm hoses.
Prices incl. VAT;
The temperature sensor / probe enables a more accurate measurement of the temperature. This temperature sensor can be mounted as a third sensor (in addition to the two temperature sensors built into the heating and control panel); for example, in the living or sleeping area. The cable is 5 m long and protected by a corrugated tube. Suitable for AUTOTERM Luft 2D / 4D (formerly Planar 2D, 4D and 44D) parking heaters. Note: 1 temperature sensor can be connected per heater.
Prices incl. VAT;
Planar 2D Auxiliary Vehicle Heater We offer the Planar 2D auxiliary vehicle heater as a well-priced, powerful alternative to our Webasto auxiliary vehicle heater kits. With their compact size and a heater output of 1.8 kW, the Planar 2D is well-suited for fitting to smaller vehicles, vans, off-roaders, camper vans, boats or in confined spaces. It is ideal for 'typical' off-road vehicles like the Land Rover Defender, Mercedes G oder Jeep Wrangler JK. The extensive fitting kit that is supplied with each heater make fitting easy. The Planar 2D can be easily controlled via its analogous control unit, with 8 settings available from 0,8 - 1,8 kW heat output. Available as both, 12 volts or 24 volts, this heater is European market approved (ECE label) and can thus be fitted independet of TUV approval. The parking heater has approval for the European market (ECE test mark) and can therefore be installed without registration. The hole pattern is the same as that of Eberspächer Airtronic and Webasto AirTop 2000 heaters, so that an old unit could easily be replaced without drilling additional holes.A space-saving version with a 90° angle can be found here. All Planar auxiliary vehicle heaters are extremely long-lasting and durable, as well as very frugal. The heater can also be used while driving. And extensive range of additional equipment is available in our online shop. Attention Defender drivers: Our extensive Planar full-set for Land Rover Defender not only includes everything needed to perfectly fit the heater to your Tdi, Td5 or Td4 Defender, but also offers considerable savings over the individual purchase of all included items. Comes with: - 12 V or 24 V heater- Optionally analogue PU-5 control panel with rotary control or digital Comfort Control control panel with timer- Thomas Magnet P327" dosing pump- Exhaust silencer- Dosing pump rubber holder- Dosing pump wiring harness- Heater wiring harness- Intake air hose with integrated silencer- Heat protection hose- Exhaust pipe end piece + clamp- Tank intake pipe- 5.5 m fuel line- 300 mm fuel line connector- 1 m corrugated metal exhaust pipe- Fastening material (screws, nuts, clamps, heat-shrink tubing, cable ties)- Operating instructions Technical details: · fuel: diesel· heat output: max. 1.8 kw, min. 0.8 kw· air volume: max. 75 m³/h, min. 34 m³/h· fuel consumption: max. 0.24 l/h, min. 0.1 l/h· power drain: max. 29 W, min. 10 W· manual start/stop→ On the Autoterm.cz website you will find a calculator for the correct dimensioning of the air heater The AUTOTERM Luft 2D (Planar 2D) is equipped with a height kit!This means that the heater automatically reduces the injection quantity according to the ambient air pressure. This reduces or prevents shooting of the combustion chamber when the atmospheric oxygen content drops. The max. Heating power drops in proportion to the amount of oxygen in the air. Roughly one can say: From 2.000 meters the loss of power per 500 m height is approx. 5%. Manufacturer tests up to 3.440 m were no problem. No difficulties are to be expected up to 4.000 m. The software itself calculates up to 5.000 m - however, this has not yet been tested in real height. The separately available control unit with timer (optional extra) features a larger OLED display and more intuitive operation. Temperature, ventilation and output can be configured via a display and various switches. An added timer clock allows you to set the heater to a specific time. OLED display provides maximum visibility with minimum power drain. Possible settings:- temperature and output- time and date- language (English or Russian) Features of the new timer clock:- daily: one fixed time at which the heater starts each day- individual: up to thee different settings with different days and times. To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate. The improved new control unit is also available separately. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment
Prices incl. VAT;
AUTOTERM air 4D (Planar 44D) diesel / air parking heater with additional tank
€619.00
Prices incl. VAT; / Parcel shipping
Delivery time 5-10 working days
AUTOTERM Air 4D (Planar 44D) parking heater
The parking heater has an approval for the European market (ECE mark) and can therefore be installed without registration. The hole pattern here corresponds to the familiar heaters of Eberspächer Airtronic and Webasto AirTop 2000, so that here can be easily replaced without having to drill new holes in the body.
All AUTOTERM parking heaters are characterized above all by their durability and reliability with economical consumption. In addition, the heater also has a switchable ventilation function.
The parking heater can also be operated while driving. Extensive accessories are available here in our store. The AUTOTERM 4D (prev. 44D) parking heater needs warm air pipes and outlets with 75 mm diameter.
Running time: The AUTOTERM parking heater switches off automatically after 2 hours of operation. However, once you press a button during operation, the parking heater will continue to run indefinitely until it is manually turned off.
Scope of delivery:
- Control element (either simple control Simple Control or Comfort Control depending on your selection.
- metering pump
- Rubber holder metering pump
- Wiring harness metering pump
- Wiring harness heater
- Intake air hose with integrated silencer
- Heat protection hose
- End piece exhaust pipe incl. clamp
- Tank intake pipe
- 5.5 m fuel line
- 7 l fuel tank plastic (width: 33 cm + 3 cm intake manifold; height: 26.5 cm + 3 cm bracket + 4.5 cm screw cap, depth: 10 cm)
- 300 mm fuel line connector
- 1 m corrugated metal exhaust pipe
- exhaust silencer
- screws, nuts, clamps, heat shrink tubing, cable ties
- Instruction manual
Technical data:
- Fuel type: diesel
- Heating power: max. 4 kw, min. 1 kw
- Volume of heated air: max. 120 m³/h, min. 70 m³/h
- Fuel consumption in operation: max. 0,514 l/h, min. 0,12 l/h
- Power consumption in operation: max. 62 W at 12 V operating voltage, max. 58 W at 24 V operating voltage, min. 10 W
- Manual start/stop
→ On the Autoterm.cz site you can find a calculator for correct air heater sizing,
You can choose between two control elements:
- PU-5 control element with rotary control: the old PU-10 control element had a relatively inaccessible control surface. Therefore, the reliable control element with rotary control is now the new improved standard of Planar parking heaters! With the rotary control you can adjust the heating power of the parking heater and regulate the power of the ventilation in the ventilation mode! The PU-5 control element with rotary control can also be purchased separately here.
- The digital control element Comfort Control with timer has an OLED display and an understandable and clear interface. Temperature, ventilation and power can be configured via the display and the various buttons. With the new timer, you simply set the start of the parking heater to a specific time. The organic light-emitting diodes of the display ensure a particularly high contrast and low power consumption. The digital control element with timer can also be purchased separately here.
Setting options (Comfort Control):
- Temperature and power (adjustable for the parking heater, the control panel and for an external heater)
- Time and date
- Operating language (English or Russian)
- Functions of the timer (Comfort Control):
- Memory function: save time so that the parking heater starts at this time every day
- Configurable memory locations: Up to 3 different days of the week with different times can be set and stored.
The AUTOTERM Luft 2D (Planar 2D) is equipped with a height kit!
This means that the heater independently reduces the injection quantity according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content drops. The maximum heating power decreases proportionally to the amount of oxygen in the air. Roughly one can say: From 2,000 meters the loss of power per 500m altitude is about 5%. Manufacturer tests up to 3.440 m were without problems. Up to 4,000 m, no difficulties are to be expected. Up to 5,000 m the software calculates itself - but this could not be tested in real altitude yet.
Please note:
Use this 4 kW heater only if this size is really erforgerlich! It is expressly not recommended to permanently turn down the heating. In case of less demand the AUTOTERM Luft 2D (former Planar 2D parking heater) is recommended. If the larger heater is used on a long-term basis on a lower load, the combustion chambers will quickly become sooty - which will cause the heater to fail.
To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate.
https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment