Water heater from Autoterm Engine preheater supplied with full installation kits, that includes: air intake hose with silencer, exhaust pipe with isolation, fuel pipe, mounting bracket, coolant pump and pipe, fuel pump and fuel stand pipe, control panel, muffler, tapered pipes, clamps, screws, wires etc. Advantages of the AUTOTERM Flow 5D (= Planar BINAR 5S): - Compact size (smaller size in comparison with other models);- The choice of installation options;- Exclusion of a cold start, which in turn extends the life of the engine;- Auxiliary function;- The reasonable price and high quality;- Low fuel consumption;- Self-diagnosis and outputting the display error. Technical data: Heating efficiency: 5 kWFuel consumption: 0.62 l/hHeater power consumption: 42 WFuel: DieselNominal supply voltage: 12 VWe are happy to advise you: ☎ +49 9181 / 466 644   https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

AUTOTERM Air 4D (Planar 44D) parking heater As a low-priced and powerful alternative to our complete Webasto parking heater kits, we offer the AUTOTERM 4D (formerly Planar 44D) parking heater. The particularly compact dimensions and its heating power of 4 kW allow installation even in small cars, vans off-roaders motor homes, construction machines, boats or under difficult installation situations. The extensive range of accessories supplied simplifies installation. The parking heater has an approval for the European market (ECE mark) and can therefore be installed without registration. The hole pattern here corresponds to the familiar heaters of Eberspächer Airtronic and Webasto AirTop 2000, so that here can be easily replaced without having to drill new holes in the body.All AUTOTERM parking heaters are characterized above all by their durability and reliability with economical consumption. In addition, the heater also has a switchable ventilation function.The parking heater can also be operated while driving. Extensive accessories are available here in our store. The AUTOTERM 4D (prev. 44D) parking heater needs warm air pipes and outlets with 75 mm diameter.Running time: The AUTOTERM parking heater switches off automatically after 2 hours of operation. However, once you press a button during operation, the parking heater will continue to run indefinitely until it is manually turned off.Scope of delivery:- Control element (either simple control Simple Control or Comfort Control depending on your selection.- metering pump- Rubber holder metering pump- Wiring harness metering pump- Wiring harness heater- Intake air hose with integrated silencer- Heat protection hose- End piece exhaust pipe incl. clamp- Tank intake pipe- 5.5 m fuel line- 7 l fuel tank plastic (width: 33 cm + 3 cm intake manifold; height: 26.5 cm + 3 cm bracket + 4.5 cm screw cap, depth: 10 cm)- 300 mm fuel line connector- 1 m corrugated metal exhaust pipe- exhaust silencer- screws, nuts, clamps, heat shrink tubing, cable ties- Instruction manualTechnical data:- Fuel type: diesel- Heating power: max. 4 kw, min. 1 kw- Volume of heated air: max. 120 m³/h, min. 70 m³/h- Fuel consumption in operation: max. 0,514 l/h, min. 0,12 l/h- Power consumption in operation: max. 62 W at 12 V operating voltage, max. 58 W at 24 V operating voltage, min. 10 W- Manual start/stop → On the Autoterm.cz site you can find a calculator for correct air heater sizing,You can choose between two control elements:- PU-5 control element with rotary control: the old PU-10 control element had a relatively inaccessible control surface. Therefore, the reliable control element with rotary control is now the new improved standard of Planar parking heaters! With the rotary control you can adjust the heating power of the parking heater and regulate the power of the ventilation in the ventilation mode! The PU-5 control element with rotary control can also be purchased separately here.- The digital control element Comfort Control with timer has an OLED display and an understandable and clear interface.  Temperature, ventilation and power can be configured via the display and the various buttons. With the new timer, you simply set the start of the parking heater to a specific time. The organic light-emitting diodes of the display ensure a particularly high contrast and low power consumption. The digital control element with timer can also be purchased separately here.Setting options (Comfort Control): Temperature and power (adjustable for the parking heater, the control panel and for an external heater) Time and date Operating language (English or Russian) Functions of the timer (Comfort Control): Memory function: save time so that the parking heater starts at this time every day Configurable memory locations: Up to 3 different days of the week with different times can be set and stored. The AUTOTERM Luft 2D (Planar 2D) is equipped with a height kit!This means that the heater independently reduces the injection quantity according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content drops. The maximum heating power decreases proportionally to the amount of oxygen in the air. Roughly one can say: From 2,000 meters the loss of power per 500m altitude is about 5%. Manufacturer tests up to 3.440 m were without problems. Up to 4,000 m, no difficulties are to be expected. Up to 5,000 m the software calculates itself - but this could not be tested in real altitude yet. Please note: Use this 4 kW heater only if this size is really erforgerlich! It is expressly not recommended to permanently turn down the heating. In case of less demand the AUTOTERM Luft 2D (former Planar 2D parking heater) is recommended. If the larger heater is used on a long-term basis on a lower load, the combustion chambers will quickly become sooty - which will cause the heater to fail. To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

AUTOTERM air 2D (Planar 2D) parking heater, space-saving design (90° angle) Proven heating technology for campers, off-roaders, boats and more.   Formerly known as the Planar 2D, the Autoterm Air 2D is one of the most popular diesel parking heaters for campers, motorhomes, boats and expedition vehicles. Robust, reliable and safe - with extremely low fuel and power consumption - it is perfect for anyone who needs reliable heat on the road.   Manufactured in Latvia, it is completely “Made in Europe”.   High quality, high flexibility and perfect for DIY installation. Thanks to its compact design and various operating elements, the Autoterm Air 2D is suitable for almost any touring vehicle - from panel vans to expedition trucks. It can also be used on the water.   Thanks to the E-mark, it can be installed without registration - without TÜV approval and without loss of warranty if you install it yourself.  It is available for 12V for most campers and vans. The heater is available with two different hot air outlets for different space conditions and installation situations. 1. with straight outlet (can be found here): Please note that the warm air must be directed away from the heater in as straight a line as possible. The hot air pipe should ideally only make slight bends and must not make a 90° angle or similar bends directly behind the heater. Otherwise, heat will build up in the heater, causing it to switch off for safety reasons.   2. with 90° angle: Here, the hot air is discharged from the heater at a specially flow-optimized 90° angle. The outlet can be installed facing upwards or to the side. When installing this version in particular, it is important to realize straight piping from the heating outlet. The maximum pipe length must not exceed 3-4m.Important: Even if the heaters are completely identical: If you use the straight version of the warm air pipe to create an angled outlet as with the space-saving housing, your heater will overheat. Therefore, please plan your installation with regard to the routing of the hot air pipe before ordering so that you know immediately whether the straight or the angled outlet is more suitable for your installation! High-altitude kit as standard - ready for any adventure Whether in Nepal or the Andes: The Air 2D is equipped with an altitude kit that automatically adjusts the combustion to the change in air pressure. This means it runs reliably even at high altitudes. Nevertheless important: At very high altitudes, the amount of oxygen decreases - and with it the maximum output of the heater. As a rule of thumb: from an altitude of approx. 2000 m, the heater loses approx. 5 % output per 500 meters of altitude. And: the higher the altitude, the more sensitive the heater is to resistance in the air flow. Therefore, especially for operation at high altitudes, use the shortest and simplest possible air ducting and above all avoid angles and kinks! You can also simply remove the pipework completely for this time. Maintenance: Don't forget to burn off Like any diesel engine, a diesel parking heater needs to reach a certain temperature from time to time to get rid of deposits. Therefore, when you leave the mountains, let it run at full load for an hour. The same applies if it is permanently operated at a low level. This is comparable to a proper highway trip to maintain a diesel car. Control and operating elements A control panel is included with the heater (simply select the appropriate one above). You have the choice between these models:   Simple control panel Rotary control with power control, optional temperature mode with separate sensor.   Comfort Control Panel Modern OLED display, menu navigation finally also in German, timer function, voltage display, thermostat mode, multifunctional rotary control - everything you need. Scope of delivery: Autoterm Air 2D heater Control element  Extra quiet fuel pump incl. rubber holder Exhaust silencer (17 × 9 × 5 cm) Intake air hose with integrated silencer Cable harnesses for pump and heater Exhaust pipe (1 m metal), end piece + clamp Heat protection hose Fuel line (5.5 m), connector, tank intake pipe Assembly material (screws, nuts, clamps, heat-shrink tubing, cable ties) Operating instructions Attention: Sufficient length of fuel hose is included (simply cut into pieces if necessary).  Dimensions of the Air 2D Length: 33 cm Height: 12 cm + 2.5 cm for connections Depth: 12 cm Weight: 2.86 kg (without accessories)   To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate.

Planar 2D Auxiliary Vehicle Heater We offer the Planar 2D auxiliary vehicle heater as a well-priced, powerful alternative to our Webasto auxiliary vehicle heater kits. With their compact size and a heater output of 1.8 kW, the Planar 2D is well-suited for fitting to smaller vehicles, vans, off-roaders, camper vans, boats or in confined spaces. It is ideal for 'typical' off-road vehicles like the Land Rover Defender, Mercedes G oder Jeep Wrangler JK. The extensive fitting kit that is supplied with each heater make fitting easy. The Planar 2D can be easily controlled via its analogous control unit, with 8 settings available from 0,8 - 1,8 kW heat output. Available as both, 12 volts or 24 volts, this heater is European market approved (ECE label) and can thus be fitted independet of TUV approval. The parking heater has approval for the European market (ECE test mark) and can therefore be installed without registration. The hole pattern is the same as that of Eberspächer Airtronic and Webasto AirTop 2000 heaters, so that an old unit could easily be replaced without drilling additional holes.A space-saving version with a 90° angle can be found here.  All Planar auxiliary vehicle heaters are extremely long-lasting and durable, as well as very frugal. The heater can also be used while driving. And extensive range of additional equipment is available in our online shop. Attention Defender drivers: Our extensive Planar full-set for Land Rover Defender not only includes everything needed to perfectly fit the heater to your Tdi, Td5 or Td4 Defender, but also offers considerable savings over the individual purchase of all included items. Comes with: - 12 V or 24 V heater- Optionally analogue PU-5 control panel with rotary control or digital Comfort Control control panel with timer- Thomas Magnet P327" dosing pump- Exhaust silencer- Dosing pump rubber holder- Dosing pump wiring harness- Heater wiring harness- Intake air hose with integrated silencer- Heat protection hose- Exhaust pipe end piece + clamp- Tank intake pipe- 5.5 m fuel line- 300 mm fuel line connector- 1 m corrugated metal exhaust pipe- Fastening material (screws, nuts, clamps, heat-shrink tubing, cable ties)- Operating instructions Technical details: ·         fuel: diesel·         heat output: max. 1.8 kw, min. 0.8 kw·         air volume: max. 75 m³/h, min. 34 m³/h·         fuel consumption: max. 0.24 l/h, min. 0.1 l/h·         power drain: max. 29 W, min. 10 W·         manual start/stop→ On the Autoterm.cz website you will find a calculator for the correct dimensioning of the air heater The AUTOTERM Luft 2D (Planar 2D) is equipped with a height kit!This means that the heater automatically reduces the injection quantity according to the ambient air pressure. This reduces or prevents shooting of the combustion chamber when the atmospheric oxygen content drops. The max. Heating power drops in proportion to the amount of oxygen in the air. Roughly one can say: From 2.000 meters the loss of power per 500 m height is approx. 5%. Manufacturer tests up to 3.440 m were no problem. No difficulties are to be expected up to 4.000 m. The software itself calculates up to 5.000 m - however, this has not yet been tested in real height. The separately available control unit with timer (optional extra) features a larger OLED display and more intuitive operation. Temperature, ventilation and output can be configured via a display and various switches. An added timer clock allows you to set the heater to a specific time. OLED display provides maximum visibility with minimum power drain.  Possible settings:- temperature and output- time and date- language (English or Russian) Features of the new timer clock:- daily: one fixed time at which the heater starts each day- individual: up to thee different settings with different days and times. To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate. The improved new control unit is also available separately.  https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

Control unit for the Planar 2D This board can be used as a spare part or to convert heaters without height kit.  For vehicles with 12V on-board voltageSuitable for heaters from serial number: 5561 ..... Please note : This control unit features an updated algorithm for the temperature mode. This means that, in temperature mode, the heating switches off once it has reached the set temperature, rather than reducing the output as in the previous version.If you carry out the conversion yourself, the warranty and the warranty expire. We advise against an independent conversion!The return of an electronic component is not possible. Have it carried out in a certified specialist company. If you have any questions please contact us via email or phone. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

Control element for Planar Autoterm air parking heater 12V 2D and 4D Comfort is when you don’t have to worry about life’s basics and feeling warm and cozy is definitely one of them, especially when camping, on a weekend trip or a 4x4 adventure. And since there is always too much on everyone’s to do list anyway, it’s a great relief when there’s at least one job you never have to worry about before you hit the sleeping bag or your bunk. That’s where the Comfort Control remote for Autoterm/Planar Diesel air heaters 2D and 4D comes in. Completely redesigned and greatly improved when compared to its predecessor, the Comfort Control activates and deactivates your heater based on timer and/or thermostat settings. Choose from three timer modes for recurring heating intervals, a power mode for constant output, ventilation-only modes e.g. for reducing air humidity inside your camper and last but not least the new thermostat mode. The latter was added due to popular request and allows for setting and maintaining comfortable temperatures by individual degrees centigrade. No more nights in the camper when it’s constantly either too cold or too hot. The new design is also much more comfortable and ergonomic. The OLED display, the multifunctional, non-slip rotary dial as well as two push buttons make selecting and setting the desired functions really easy. Navigating the menus is intuitive and straightforward and basic functions can be accessed directly with a shortcut button. Despite a bigger display and more functions, the  Comfort Control is actually smaller in size than its predecessor. With dimension of only 82 x 37 x 19 mm, you can hide it easily but you don’t have to because the new design is a lot more stylish and will make a nice feature in any camper. Concern for space is one thing in camping mobiles, the usage of electricity is another. In that respect, the remote control has also improved by minimizing its own power consumption. Moreover, the Comfort Control is capable of monitoring the voltage, effectively eliminating the danger of the heater deep discharging the battery. Another great feature is an alert function reminding you when to burn off soot deposits in the combustion chamber. Connecting the Comfort Control remote is as easy as plug & play.

Dropside bushing 24mm for exhaust of AUTOTERM (=Planar) parking heater, with screw holes Side wall bushing for all Planar parking heaters with an exhaust pipe diameter of 24 mm (AUTOTERM Luft 2D / 4 D = Planar 2D, 4D, 44D).There is the version with screw holes as well as the version with stud bolts where no screws are visible from the outside. The variant with stud bolts is particularly suitable for a wall thickness of up to 15 mm.If the wall thickness is thicker, the version with screw holes should be used. Please note:When installing the parking heater, you must take into account the general wading depth of the vehicle. Depending on the position of the parking heater intake, the wading depth may change individually for the vehicle. Please also be sure to observe the instructions of the parking heater manufacturer!

AUTOTERM fuel pump / fuel pump, extra quiet Due to the hydraulic end stop, the pump is about half as loud as a conventional fuel pump. Suitable for AUTOTERM 2D (= Planar 2D) and AUTOTERM Flow (= Binar).On-board voltage: 12 VFlow rate: 4.4 ml https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

Autoterm Push Control S and L The Autoterm Push Control is a compact and easy-to-use switch for controlling Autoterm parking heaters. It enables different operating modes and functions depending on the heater. It also fulfils a long-held customer wish to be able to connect two control units to one heater - so the heater can be started conveniently from the driver's cab, for example, while the standard control unit is installed in the living area. NEW: The Autoterm Push Control enables simple control of air and water level heaters and, for the first time, the option of connecting two control panels to one heater! FunctionsOperating modes for air heatersPower mode (standard mode): With a single or multiple click, you can choose between five fixed power levels. The colour of the LED ring indicates which power level the heater is currently inTemperature mode: In conjunction with an external temperature sensor, a temperature of 18, 21 or 25 degrees can be achieved and maintained. "Maximum power" can also be set as the highest level in temperature mode. Operating modes for water level heatersPreheating mode: The heater runs until a certain coolant temperature is reached, then switches off the burner and restarts when the temperature drops. Here you can choose between a heating time limited to two hours or continuous operation. Simple installationThe Push Control comes in a plug-and-play design with an included control module and connection cable for quick and easy integration. Dual controlfinally possible: The Push Control can be used as the sole control element for your heating system or combined with the Autoterm Comfort Control control panel to enable dual control for a single heating system. This makes it easy to operate your parking heater in different areas of the vehicle and ensures maximum user comfort. Robust and waterproofStainless steel housing with IP67 protection class, making the switch waterproof and safe and durable even under extreme conditions. CompatibilitySuitable for Autoterm Air heaters (2D, 4D, 8D, 9D) and Autoterm Flow heaters (5D, 5B, 14D). Available in two versions:Variant S: 6 mm thread with Molex plugVariant L: 12 mm thread with round plugDimensions for both switches:Diameter of the button surface 25 mm each.Thread diameter 22 mm each.  

For reliable ignition of your parking heater Glow plug as a spare part for AUTOTERM Planar 2D12 parking heater.

Exhaust silencer for AUTOTERM (=Planar), Binar, Eberspächer parking heaters This stainless steel exhaust silencer is suitable for all parking heaters (air heating and water heating) with a 24 mm exhaust pipe.Suitable for the following heaters:    AUTOTERM Air 2D and AUTOTERM Air 4D (formerly Planar 2D, Planar 44D), AUTOTERM Flow 5D (formerly Binar 5D).    Eberspächer AirtronicAs the Webasto heaters have a 22 mm exhaust pipe, this silencer does not fit.Dimensions:    Outer diameter connection: 24 mm    Total length: 18 cm    Length of silencer without connections: 14 cm    Diameter: 40 mm (additional 2 cm fastening device)

Simple control panel (PU-5) for Planar parking heaters The control panel offers easy operation of the Planar parking heaters. The heater can be switched on or off manually via the control elements. Furthermore, the heat output can be regulated via the control panel.Control elements: Planar-5M  1. switch ventilation off/on2. switch heating on/off3. LED light to indicate the status of the heater    - yellow light = heater running    - slow, red flashing = malfunction4. LED light for status display of ventilation    - Green light = ventilation running    - green flashing = ventilation off    - yellow light = heating and ventilation are on together5. rotary control

Additional tank 7.5 litres for parking heaters This additional tank can be placed anywhere on the vehicle.The tank can be filled with 7.5 litres of fuel, e.g. for the AUTOTERM Planar 2D parking heater. Suitable fastening material is included in the scope of delivery.

Autoterm Air 2D repair kit The set consists of the following components: Glow plug screen Gasket for the glow plug Gasket for the combustion chamber Seal for the fan motor Seal for the fuel line Caution: Opening the appliance yourself within the warranty period will invalidate the warranty. Repairs should therefore be carried out by specialised companies.

The temperature sensor / probe enables a more accurate measurement of the temperature. This temperature sensor can be mounted as a third sensor (in addition to the two temperature sensors built into the heating and control panel); for example, in the living or sleeping area. The cable is 5 m long and protected by a corrugated tube. Suitable for AUTOTERM Luft 2D / 4D (formerly Planar 2D, 4D and 44D) parking heaters. Note: 1 temperature sensor can be connected per heater.

Intake filter set for your Autoterm parking heater The Autoterm air intake filter set is the ideal addition for auxiliary heaters that are regularly used in demanding conditions. Whether in a camper van, expedition vehicle, off-roader or motorhome: on gravel tracks, dusty roads and in arid regions, dirt can quickly find its way into the combustion air intake system. The intake filter helps to trap dust, coarse particles and contaminants, keeping the heater’s air supply cleaner.   The set is suitable for the Autoterm Air 2D, Autoterm Air 4D and Autoterm Flow 5D / 5B, and is designed for heaters with a 24 mm intake diameter. The scope of delivery includes the air intake filter, an intake pipe or air hose, and the necessary fitting materials. The air hose is 380 mm long.   Particularly handy: the filter insert can be cleaned as required. Regular checks are recommended, as a heavily soiled filter can restrict the supply of combustion air and thus impair heating performance.   Advantages at a glance Genuine Autoterm accessories For Autoterm Air 2D, Air 4D and Flow 5D / 5B For a 24 mm intake diameter Protects against dust, dirt and coarse particles Ideal for off-road trips, desert tours and dusty routes Includes intake pipe, air filter and fitting kit Filter insert suitable for cleaning  

Wear kit with exhaust pipe for AUTOTERM Air 2D / 4D  For our portable heater boxes, we only use AUTOTERM (previously Planar) Diesel heaters. Since we always have a surplus of original AUTOTERM accessories left over after assembling the units, we’re offering these essential parts as wear kits at an unbeatable special price. This represents a whopping discount of nearly 70% compared to the retail value of the individual parts.The sets will fit AUTOTERM 2D and 4D air heaters and consist of one fuel line, one exhaust pipe including heat insultation and various pieces of fastening materials. These are essential spare parts and replacements to keep handy in case of damage or wear and tear.

Air vents for individual warm air regulation This vent can be used for all independent vehicle heaters with 60 mm piping, like the Planar 2D auxiliary heater. The vent can not be fitted to our auxiliary heater center console, in which case please use our Webasto vent.

Manifold T-piece for 75 mm hot air pipes - ideal for AUTOTERM & similar systems T-piece suitable for warm air ducts of Planar 2D auxiliary heaters and other independent vehicle heaters with 75 mm hoses.

Adapter / Reducer 90-60 and 75-60 Warm Air Pipe for Parking Heaters With this adapter or reducer you can reduce the warm air duct of a parking heater from a 90 mm warm air pipe to a 60 mm warm air pipe.The 75-60 adapter is intended, for example, to connect a 75mm warm air pipe with a 60mm connection piece.

The ideal connector for evenly distributing warm air in a 60 mm system across two strands e.g. in a camper van, van or expedition vehicle If you want to distribute the warm air from your parking heater evenly between two outlets, this Y-piece (60 × 60 × 60 mm) is the perfect solution. Its symmetrical design allows the air flow to be distributed evenly between two pipes – perfect for well-designed warm air distribution in 60 mm pipe systems.   Your advantages Symmetrical distribution for even warm air distribution Suitable for 60 mm warm air pipes/hoses Ideal for parking heater warm air systems (e.g. Autoterm/Planar and other 60 mm systems) Compact and lightweight – easy to install and lay the pipes   Technical data Design: Y-piece, symmetrical Connection size: 60 / 60 / 60 mm Manufacturer: Autoterm Tip: For a permanently secure connection, the warm air pipes should be pushed on cleanly and secured with suitable clamps if necessary.

Y-Piece 60-60-60 mm Asymmetrical Warm Air Distributor This asymmetrical Y-piece expands your 60 mm warm air ducting system and splits the airflow into two outlets – ideal for efficiently heating multiple areas in a camper, van or motorhome. Thanks to the 45° branch, warm air can be directed precisely where it is needed, while the main duct continues to be reliably supplied.   Key benefits at a glance:   Asymmetrical airflow distribution for targeted heat management – not a 50:50 split, but approx. 2/3 : 1/3, perfect when one area requires more heat than another   Compatible with all common 60 mm warm air hoses used with heaters such as Autoterm, Eberspächer and similar systems   Robust and practical solution for extending your auxiliary heater’s warm air distribution   Ideal for customizing heat distribution in your vehicle and supplying multiple warm air outlets.

Connector ring for Autoterm hot air systems – 60 mm A clean solution instead of improvisation: this connector ring connects the heating outlet directly and precisely to distribution elements such as Y- or T-pieces. There is no need for additional hot air pipes or hose clamps. Technical data: Diameter: 60 mm Colour: Black Advantages at a glance Easy installation: Direct connection of air duct and distribution elements Tight & efficient: Reduces heat loss through airtight connection Time-saving: Ideal for new installations and retrofits Universally applicable: Suitable for all components with a diameter of 60 mm

Spare part -> Attachment fuel pump for Autoterm air parking heaters 2D and 4D AUTOTERM Air 2D AUTOTERM Air 4D Material: solid rubber (with metal sleeve for attachment)