Land Rover

Parabolic springs for 88" and 109", Land Rover Series II, IIA and III, front (2-layer) and rear axle (3-layer); including Cellular Dynamic shock absorbers Basically, a parabolic spring is a spring that consists of two or more leaves. The leaves only touch in three places: In the centre, where they are attached to the axle, and at the outer ends, where they are attached to the vehicle. Between these points, the leaves do not touch, unlike conventional leaf springs.Since in the Parabolic spring a spring tapers from the wide centre to the outer ends, a single leaf acts like a complete spring - the thickness of the spring changes according to a parabola and provides a constant distribution of tension. Each leaf has more or less the shape of a complete multi-leaf spring and can therefore withstand a comparable force. The high quality OEM parabolic springs are paired with Cellular Dynamic shock absorbers. Also included in the kit are leaf spring correction wedges that can be used to correct caster or diff bolt angle by 3 degrees. The parabolic springs include u-bolts and nuts. Scope of supply: 2 x Parabolic Springs - 2 or 3 sheet 2 x Cellular Dynamic long travel shock absorbers 2 x Angle correction wedges

TREKFINDER suspension kit LAND ROVER Defender II 90/110 with steel suspension / coil springs +50 mm sporty tight tuning without being uncomfortable eliminates the standard spongy, indirect suspension and driving behaviour Height increase approx. 50 mm ( depending on type and version ) trailer operation is still permissible The length of the shock absorbers, brake lines and other lines is sufficient. Version: Defender 90: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Design: Defender 90 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1400 / 1775EC-TG no.:e5*2007/46*0092..e5*2007/46*0152.. Version: Defender 110: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Model: Defender 110 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1560 / 1800EC-TG no.:e5*2007/46*0092*..e5*2007/46*0125*.. Scope of delivery: 2 pieces TREKFINDER coil springs front axle / linear / black metallic 2 pieces TREKFINDER coil springs rear axle / progressive / black metallic 1 piece TÜV® parts certificate

Air Suspension Defender 90/110/130/Discovery I/ Range Rover Classic These auxiliary air springs provide a more stable ride and noticeably improve the handling of the vehicle. Lateral roll of the vehicle is noticeably reduced. The air springs are inflated using the supplied hoses which are routed to an accessible location. A hand pump can be used for this purpose, as can a compressor, or they can simply be filled at the petrol station. They are available for Defender 90, Disovery U and Range Rover Classic or Defender 110 / 130.Supplied in pairs, the auxiliary air springs can be adjusted to suit all conceivable load and off-road conditions. Simply increase the air volume for increased load, or deflate for driving without additional load.The springs are made from durable and dimensionally stable polyurethane.Please select the vehicle.

Comfort spring set TREKFINDER for LAND ROVER Defender 110 with VA +20 / HA +0 millimetres the lifting is +20 millimetres at the front axle, +0 millimetres at the rear axle matched to the TREKFINDER® shock absorbers Raid ( article no. 90-5470 + 905471 ) SCOPE OF DELIVERY: 4 pieces TREKFINDER® coil springs progressive 1 piece TÜV® parts certificate Suitable for Land Rover Defender 110 until BJ 2016  

Caster correction wedges If you raise your car’s suspension or exchange your original shocks, most of the time axle or wheel geometry, i.e. caster or camber angles, will get out of alignment. To correct aberrations on axles with leaf springs, especially our 3-leaf parabolic springs for the 88” rear axle Land Rover Series II, IIA und III, we are now carrying these caster correction wedges. The wedges provide 3° correction and have a 13 mm pin opening.

This set conists of: 1x TREKFINDER Coil Spring Set 2x Upper Supports 2x Lower Supports

Inside spring set by TREKFINDER, optional for the rear axel with installed liftkit. Scope of Delivery: 2x Progressively wound spring coils

The additional spring kit for the rear axle of the Land Rover Defender 110 and 130 increases the spring rate and thus minimises the effects of high payloads. The kit consists of 2 additional springs, 2 upper brackets and 2 lower brackets. This kit is intended for vehicles that are permanently or predominantly driven with a high load. For vehicles that are driven with varying loads, we recommend the Progressive additional spring kit. Delivery without expert opinion, registration by individual approval is possible.

Price per unit

Price per unit

Price per unit

Price per unit

Price per unit

Sportier Look and Optimized Handling: The TREKFINDER Lowering Spring Kit -40mm for Your Defender 110! You love your Land Rover Defender 110 for its robustness and character, but do you wish for a more direct driving feel on the road, improved road holding, and an even more striking, individual appearance? Then we have exactly what you need: the TREKFINDER lowering spring kit for your Defender 110, which lowers it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a significantly more dynamic and planted look but also noticeably optimize its handling on paved roads. Reducing the vehicle height lowers the center of gravity, which can lead to more agile handling and less body roll in corners. Why TREKFINDER Lowering for Your Defender 110? Improved Road Holding: Experience a more stable and precise driving feel, especially in corners and at higher speeds. Sporty, Striking Look: Give your Defender 110 an individual, lower look that makes it stand out from the crowd. More Direct Turn-in: Benefit from a more agile response of your vehicle to steering inputs. Easier Entry: The lower vehicle height can make getting in and out, as well as loading the roof, easier. High-Quality Springs: The specially developed springs are designed to offer an optimal balance between a sportier driving feel and good remaining comfort. Progressively Wound Springs: The lowering is approx. 45 mm on the front axle and approx. 40 mm on the rear axle. Standard Shock Absorbers Can Still Be Used: In most cases, the original shock absorbers can still be used. However, for maximum performance and to maintain optimal spring travel, we recommend combining them with suitably adapted, shorter sports shock absorbers. TÜV Parts Certificate Included: For hassle-free registration, a TÜV® parts certificate is, of course, included. Parts certificate made by H&R. What's Included in the Set? 4 TREKFINDER coil springsThe springs are made from high-strength material 54 CrSi6 - the surface has been solidified by shot peening, zinc phosphated, and polyester coated. 1 TÜV® parts certificate This lowering spring kit is suitable for various Land Rover Defender 110 models (please refer to the enclosed parts certificate for exact model compatibility). ATTENTION: The rear axle load must be reduced to 1,800 kg! Body roll is significantly reduced. Suspension comfort is not impaired. Agility during turn-in, etc., is significantly improved. Your Defender. Your Style. Your Performance. With the TREKFINDER lowering spring kit, you're investing in a more individual appearance and optimized handling for your Land Rover Defender 110. Redefine your Landy's presence and enjoy an extra boost of driving dynamics in everyday life and on journeys. Do you have questions about installation or the ideal combination with suitable shock absorbers? Just contact us – we at Nakatanenga are happy to advise you comprehensively!

More Ground Clearance and Off-Road Performance for Your Defender 90: The TREKFINDER Suspension Lift Kit +40mm! Do you want to take your Land Rover Defender 90 where others have to turn back? Are you looking for more ground clearance, better approach and departure angles, and an even more imposing look for your iconic vehicle? Then we have exactly what you need: the TREKFINDER suspension lift kit for your Defender 90, raising it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a more aggressive look, but also noticeably improve its off-road capability. Whether you're battling through deep ruts, mastering rocky passages, or just want to keep an overview in the urban jungle – the additional 40 millimetres make the difference. Why TREKFINDER for Your Defender 90? More Ground Clearance: Overcome obstacles more easily and ensure better underbody protection. Improved Approach and Departure Angles: Master steeper inclines and declines? No problem! Option for Larger Tires: Create space for larger tires and thus optimize traction and appearance. Progressive Spring Rate: The specially wound springs are designed to offer optimal performance both unladen and with additional equipment (up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle). For you, this means: comfort on the road and, at the same time, the necessary stability in off-road conditions. Standard Shock Absorbers Can Still Be Used: In most cases, you can keep your original shock absorbers, which makes the conversion straightforward. For the ultimate driving experience, however, we recommend combining them with suitable shock absorbers, such as the TREKFINDER Koni RAID dampers. TÜV Parts Certificate Included: For a hassle-free registration, a TÜV® parts certificate is naturally included in the delivery scope. What's Included in the Set? 4 TREKFINDER coil springs with progressive rate 1 TÜV® parts certificate This suspension lift kit is suitable for various Land Rover Defender 90 models (TDI, TD5, TD4 – please refer to the parts certificate for exact model compatibility). Due to the increased angle of the front propshaft caused by the lift, we recommend installing a propshaft with a double cardan joint: Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here. Your Defender. Your Adventure. Your Decision. With the TREKFINDER suspension lift kit, you're investing in more freedom and performance for your Land Rover Defender 90. Discover new paths and experience off-road adventures on a new level. Do you have questions about installation or combining it with other suspension components? Just contact us – we at Nakatanenga are happy to advise you!

Spring lift-kit for Land Rover Defender 110, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains: * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.