Side protection
Window guards for Land Rover Defender 90/110
Window grille for Land Rover Defender 90/110 Window grille, for Land Rover Defender 90/110, for the rear side windows, material: aluminium, anodized, black powder-coated, 1 piece, delivery incl. blind rivets Please also note our optional safety mounting set for these grilles. Suitable for the rear side window of the Land Rover Defender 90/110 or windows of the same size (108x45 cm) Dimensions for mounting: Hole spacing horizontal: 112 cm Hole spacing vertical: 49 cm
Prices incl. VAT;
Security Mounting Kit for Nakatanenga Window Grille
Optional safety mounting kit for the Nakatangena window grilles for the Land Rover Defender 90/110 Consisting of:Blind rivet insert nuts, safety torx screws and matching bit Kit for one window grille
Prices incl. VAT;
Window grille for Defender 90/110 SW for mounting on the inner lining, suitable for MOLLE system
Window grille for Defender 90/110 SW for mounting on the inner lining or door frame, suitable for MOLLE system If you plan to extend your off-road, work, expedition or camper vehicle’s storage capacities, you want to maximize on flexibility, economic use of space and safety. Every trip is different: snow on one day, sand or mud on another. Sometimes you’re out for a weekend, other times it’ll be months on and off the road. Always ready to quickly accommodate widely diverse tasks, a MOLLE-compatible storage system has the additional advantage that it’s never in the way, like chests, boxes or drawers so often are.To provide a great solution for your flexible storage needs, we have developed a perfectly fitting system of interior window grills made from powder-coated aluminum for Defenders 90 SW and 110 SW up to MY 2016. Using the included fastening materials, the grills are simply screwed into the interior trim of the cargo area windows and thereby function as an equally lightweight and sturdy MOLLE grid. MOLLE (MOdular Lightweight Load-carrying Equipment) is a system of bags, pouches, holders, holsters and all kinds of straps and other fasteners that can be tied or clipped into webbings or grids – in this case the window grill – ultimately creating a very flexible, lightweight and secure carrying system for all kinds of gear. In contrast to boxes, shelves or drawers nothing can fall, slide or fly around, you always have quick and easy access and the storage space required is only little more than the size of the equipment itself. It doesn’t get much more efficient than that.In addition, we also offer a wide variety of MOLLE-bags and pouches, MOLLE-compatible emergency and first aid kits, and all kinds of fasteners, from strap sets to quickfist clips for tools and other gear. In combination with the window grids, these accessories let you customize a safe, space-saving and lightweight storage system for all tasks and purposes. Material: Powder-coated aluminum, black. Available window grilles:1 x Rear Window (Fastening on door frame)2 x Rear Quarter Window (Fastening to interior trim)2x side window load compartment (Fastening to interior trim)Mounting material included Please note:The rear quarter windows are only suitable for Land Rover Defender TD4.MOLLE-bags, quickfists and other accessories depicted in the photos are NOT included in the delivery and must be ordered separately.
Prices incl. VAT;
Abenteuer4x4 - Rockslider - for Land Rover Defender
Abenteuer4x4 - Rockslider - for Land Rover Defender The stainless steel Rockslider by Abenteuer 4x4 for the Land Rover Defender 90/110/130CC convince by a completely new design, low weight (approx. 12 kg/piece) and an easy mounting without drilling.To increase rigidity, two webs are welded on the back and the slotted holes on the long side are turned inwards.The Rocksliders not only serve to protect the bodywork, but also provide a secure foothold thanks to their non-slip surface made of drawn knobs, and their shape also protects against excessive dirt in the field. There are several openings on the underside for rinsing out dirt that has been picked up.The Rocksliders - made in Germany - are powder-coated black. Delivery includes fixing material.This item is bulky goods.Material: stainless steel, black powder coatedMaterial thickness: 3mm Delivery: 1 set Rockslider stainless steel (left & right)Bracket and fixing materialSet of screws stainless steel As a useful add-on, there are matching anti-slip pads for the Rockslider.You can find a suitable crossbar here.
Prices incl. VAT;
Modular vehicle panel, for Ineos Grenadier rear side windows, outside
Modular vehicle panel, for Ineos Grenadier rear side windows, exterior Ineos intended the Grenadier to become the heir to the old Defender in terms of off-road capability and versatility. Many well-designed details show that this was no empty promise by Ineos. The standard airline rails above the rear mudguards, for example, are a feature that every proper 4x4 should have, because real off-roaders or overlanders want to transport important equipment on the outside of the vehicle without having to drill holes or making other destructive modifications. Our modular MOLLE vehicle panels for the Grenadier are very easy to attach to the airline rails mentioned above and the rain gutters via stainless steel brackets. The universal design allows mounting on both the left and right side of the vehicle. Dismantling possible without leaving a trace. The sturdy mount plate made of black powder-coated aluminum enables the safe transport of anything that is MOLLE-compatible and can be attached with straps, clamps or quickfists, for example. The maximum load capacity is 25 kg, roughly equivalent to a 20-liter canister of water or fuel. By the way: The panels are also available in a double pack at a discount price of € 699. All fastening materials are included. Dimensions: 49,5 x 90 cm Max. Load capacity: 25 kg Please note: with some roof racks, there may be problems during installation. The area in front of the grab rail must be free, please check beforehand. CGB-Ineos works 100%.
Prices incl. VAT;
Running board round tube, for Land Rover Defender 90/110
Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.
Prices incl. VAT;
Anti-slip pad for Adventure 4x4 Rockslider for Mercedes G, 1 pair
Precisely fitting anti-slip pads for skirt sliders on the Mercedes G-Class These self-adhesive anti-slip pads have been specially developed for the skirt sliders from Abenteuer 4x4 for the Mercedes G-Class. The cut-outs are precisely matched to the hole pattern of the G-Class skirt sliders. They significantly improve the already robust anti-slip properties of the side protection, especially in wet, muddy or snowy conditions. The pads are supplied in pairs and measure 5.5 x 50 cm - ideal for the entrance area at the doors. If required, additional pads can also be used to completely cover larger areas of the Rockslider. This not only enhances the function, but also the look.Supplied in pairs, one pad each for the left and right side.
Prices incl. VAT;
Nakatanenga Corner Protectors, Set, for Land Rover Defender 90/110
Nakatanenga corner protectors, set, for Land Rover Defender 90/110 The Nakatanenga corner protector protects the rear corners of the Land Rover Defender bodywork from damage during off-road use and everyday driving. Material: Stainless steel, ceramic blasted, black powder-coated Compatible with the Nakatanenga spare wheel carrier Not compatible with the rear step Delivery includes stainless steel mounting material As the original reflector on the vehicle is concealed, we supply two Hella reflectors which can be fitted instead. The corner protectors for the Defender 90 are not compatible with the original mud flaps. ATTENTION: The corner protectors are not compatible with normal mud flaps. Please also note that only one short rear ladder can be fitted at the same time as the corner protectors.
Prices incl. VAT;
Low-lying running board round tube for four-door Defender 110 from 2003 onwards
Low-lying running board round tube for two-door Defender 90/110 from 2003 onwards The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the bodywork.The running board is black powder-coated and provides a safe step thanks to checker plate supports - even with dirty pipes.Supplied in pairs.You can find a suitable crossbar here.
Prices incl. VAT;
Door protection strips TREKFINDER for SUZUKI Jimny II from 10/2018, typ GJ an HJ, right & left side
TREKFINDER door protection moulding set for Suzuki Jimny II (from 10/2018, type GJ/HJ) Robust protection for both sides of the vehicle: The door protection moulding set from TREKFINDER is a perfect fit for the Suzuki Jimny II from model year 10/2018 (type GJ and HJ). It reliably protects against scratches, dents and damage during off-road use or everyday driving - for the right and left side of the vehicle.
Prices incl. VAT;
Land Rover Defender Black U-POL RAPTOR Stainless Steel Running Board - Step
Running boards Land Rover Defender Why skimp on comfort and looks? These running boards for Land Rover Defender 110 not only look good, they also provide a safer and more comfortable entrance to your vehicle. The round tubes are black powder-coated and equipped with checker plates. The chequer plates on the entrance tubes have an anti-slip coating so that you can enter your vehicle safely.Fixing material is included in the delivery.Important note: These running boards are not compatible with the original splash flaps (front). You will find the matching mud flaps here as well as matching splash flaps here.They are delivered in pairs.Material thickness checker plate: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)You can find a suitable crossbar here.
Prices incl. VAT;
Running board round tube for Land Rover Defender, stainless steel
Running board round tube for Land Rover Defender, stainless steel The round tube running boards serve as an entry aid and vehicle protection. They are made of stainless steel and have an aluminium tread surface with rubber pads to minimise the risk of slipping.The running boards are available for various wheelbases, delivered in pairs, optionally in stainless steel look or with additional black powder coating. Please select below.Delivery is in pairs.The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the bodywork.You can find a suitable crossbar here.
Prices incl. VAT;
Rock slider for the Jimny GJ and HJ
The rock slider for the Jimny GJ and HJ Tight-fitting rock slider made of aluminum with steel holding structure. To increase the rigidity of the slider panel, "dimple the" beads are pressed into the front. Replaces the original plastic sill protection. The steel holding structure is replaced by pressing in threaded rivets in the sill (attention, drilling out the existing holes from 8.5 mm to 9 mm necessary). On the underside, the retaining structure is held in position by clamping the sill rebate. The slider panel can be replaced separately if damaged, provided the substructure has not been damaged Sill fold protected. Our Rockslider is made of high-quality aluminum and black matt powder-coated. We opted for the lightweight design, so our Rockslider is a functional aluminum cab protection, therefore not suitable for a jack, but in medium-difficult terrain it is more than sufficient protection. The GJ Rockslider has received a general operating license (ABE). Each individual side skirts will be different after welding. Test gauges inserted to ensure a 100% fit. Scope of delivery:Rockslider left & rightGeneral operating license Facts: Weight complete set (driver & passenger side): 9.kg
Prices incl. VAT;
Rock & Tree Slider Defender, hot-dip galvanized
Rock & Tree Slider Defender Available for Defender 90 and 110 - Please select the appropriate variant. The item is supplied hot-dip galvanized! Surface treatment with RAPTOR is possible. You can find matching products here.
Prices incl. VAT;
Low-lying running board round tube for four-door Defender 110 from 2003 onwards
Low running board round tube for four-door Defender 110 from 2003 onwards Low running board for four-door Defender 110 from 2003 onwards The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the body.The running board is black powder-coated and provides a safe step thanks to checker plate supports - even with dirty pipes.Supplied in pairs.You can find a suitable crossbar here.
Prices incl. VAT;
Rockslider for Ineos Grenadier, left and right side
The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.
Prices incl. VAT;
Protective moulding and protector kit from TREKFINDER
Protective strip kit from TREKFINDER with 5 m long, attractive rubber profile incl. end caps, suitable for cars, lorries, motorhomes, boats and trailers Multifunctional use: PROTECTION: The protective moulding set effectively protects contact surfaces on the vehicle from external mechanical impact. Successfully prevents scratches, dents and minor damage caused by impacts such as parking bumps, shopping trolleys, doors, etc. RETURNS: Existing scratches, paint damage and visual defects can be covered with the mouldings at a later date. OPTICS: The protective moulding set enhances the appearance of your vehicle. The elegant rubber profile, as a discreet application, sets striking accents and makes your vehicle appear more valuable.Material: high quality durable flexible Temperature-resistant UV-resistant high adhesive strength Shape: the curved shape prevents the adhesive tape from being visible, the moulding does not stick out but merges with the bodywork, an invaluable advantage over conventional profiles!!! Easy to fit: The protective moulding is flexible and can be easily cut to the desired length.Remove the backing film from the adhesive strip and press the protective moulding onto the planned body part.Then select the desired shape of the end cap (round or square). Remove the backing film here too and press it onto the end of the protective moulding.DONE :) Scope of delivery: 1 piece 5 m rubber profile 8 end caps 1 cleaning cloth
Prices incl. VAT;
Rock & Tree Sliders for New Defender 90 / 110
Rock sliders If you love the chic exterior of your New Defender 110 (from model year 2020), there's nothing better than giving it the rock sliders from Terrafirma. They not only provide reliable protection from sticks and stones off-road, but also from shopping cart hooligans and door bumpers in the supermarket parking lot. The installation of the protective tubes, which also serve as an entry aid, is extremely easy thanks to detailed instructions. The necessary holes in the frame and the cutting of the underbody covers are kept to a minimum. All fastening materials are included.
Prices incl. VAT;
Adventure 4x4 - rock slider for Mercedes G-Class, left and right side
The high-quality sliders made of 3mm stainless steel fit all Mercedes G-models 461 and 463 and can be easily attached to the original stopping points of the running boards. The stable design offers optimal protection for your vehicle from the side and from below. The fitted shape fits perfectly to the silhouette of the vehicle and the high seat of the "G-Silde" also ensures an unchanged ramp angle. The distinctive design of Abeneuer4x4 also applies to this product "Made in Germany": the drawn knobs. These also offer a non-slip surface and ensure a secure stand. Dirt can be rinsed out through openings on the underside of the slider. Material:Stainless steel, black powder-coated Important NOTE:The original screwing points of the running boards must be available for smooth installation of the G-Slide. Scope of delivery:1 set of rock sliders (left & right) including holder and fastening material. As a useful add-on, there are matching anti-slip pads for the Rockslider.
Prices incl. VAT;
Rock Slider für Suzuki Jimny GJ Aluminium, 2 Stk
Side skirts with aluminum steps The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg The aluminum slider is completely sufficient for light terrain. Scope of delivery: Rock slider left & right mounting material 2x step-installation instructions TÜV certificate ... and with an indescribable look for free
Prices incl. VAT;
Running boards for Land Rover New Defender 110 / 130 from MY2020
Side steps available for: Defender 110 & 110 Hard Top - from 2020 Defender 130 - from 2020 Side running boards and door sills, black powder-coated, with anti-slip tape and stainless steel filler plates. Designed for mounting on the existing brackets in the sill.The plastic sill covers need to be slightly modified to gain access to the fixing points. An adapter is supplied for use with the original jack.
Prices incl. VAT;
Adventure 4x4 - Rockslider for Ineos Quartermaster, left and right side, colour: black
Adventure 4x4 - Rockslider for Ineos Quartermaster, left and right side, colour: black The ABNTR4X4 Rockslider in black for the INEOS Quartermaster is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the rigidity under lateral loads in off-road use, the elongated holes on the sides are dimpled inwards. It is mounted on the original mounts without drilling. The Rockslider is mounted directly underneath the doors instead of the plastic panelling. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Quartermaster is not changed or impaired. The Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface of drawn studs. Thanks to its shape, the Rockslider also protects against excessive dirt in the field. The dirt picked up can be rinsed out again through openings on the underside. Technical data: Suitable for Quartermaster 25 kg per Rockslider incl. bracket Mounting on original fastening points Delivery: 1 set of Rockslider stainless steel, colour black (left & right) Bracket and fastening material (left & right) Set of galvanised screws Utility model protection: 20 2023 001 190.6 Shipped on a pallet. Registration by individual approval possible.
Prices incl. VAT;
Rockslider LAPIS aluminium from Horntools for various vehicles
Robust rock slider design made of aluminium The front plate is reinforced with ‘dimple die’ beading. The steps can be unscrewed or replaced if necessary. If the footboards are not used, the holes in the Rockslider can be sealed with the screws supplied. The connection to the vehicle is made using the existing threaded inserts on the underside of the body. The Rockslider is bolted to the bodywork with 6 M10 bolts. Our Rockslider has been issued with a parts certificate by TÜV Süd. We have opted for a lightweight construction, which is why our Rockslider is a functional aluminium cab guard, so it is not suitable for a jack, but it provides more than adequate protection in moderately difficult terrain. Scope of delivery: Rockslider left & right Mounting material 4x step Installation instructions TÜV certificate and an indescribable look for free Attention: The Rockslider is only suitable for double cabs.
Prices incl. VAT;
Rockslider LAPIS aluminum from Horntools for Ford Ranger from 2023 onwards
Off-road protection in aluminium: LAPIS rock sliders for Ford Ranger from 2023 onwards Robust aluminum construction:Lightweight yet extremely resistant to impacts and external influences Effective cab protection:Protects the underside of the vehicle from damage caused by stones, branches or other off-road obstacles Simple installation:Fitting to the original attachment points enable uncomplicated installation without complex adjustments such as drilling holes Easier access:Provides additional step surface for driver and passenger Weatherproof:High-quality powder coating for long-term protection against corrosion and environmental influences TÜV parts certificate included in the scope of delivery The popular running boards for the new Ford Ranger from model year 2023 are here: Robust Rockslider design made of aluminum, the front panel is reinforced with “dimple die” beading. The steps can be unscrewed or replaced if necessary. They are fitted to the vehicle using the existing threaded inserts on the underside of the bodywork. The decision was made to use a lightweight construction, which is why the Rockslider is a functional cabin guard made of aluminum. It is not suitable for a jack, but provides more than adequate protection in moderately difficult terrain. The running boards are compatible with the following models from model year 2023: Ford Ranger XL Ford Ranger XLT Ford Ranger Wildtrak Ford Ranger Wildtrak X Technical details: Weight: 35 kg (per pair) Material: Aluminum Color: Black (powder-coated) Scope of delivery: 2 x Rockslider (driver's side & passenger's side) mounting material installation instructions TÜV parts certificate
Prices incl. VAT;
Rockslider TUBE steel from Horntools for Suzuki Jimny GJ /HJ
Rockslider TUBE steel for Suzuki Jimny GJ & HJ The robust side skirt protects your Jimny off-road. The steps are angled so that you don't get stuck anywhere. The side steps are mounted on the original attachment points. Technical data: Material: steel Color: black powder-coated Size: 129 x 41 x 28 cm Weight: 22 kg Difference to the aluminum version: The aluminum side step is much lighter and not as robust as the steel version. We therefore recommend the steel slider for tough off-road use. The aluminum version is perfectly adequate for light terrain. Scope of delivery: Rockslider left & right Mounting material 2 x step Installation instructions TÜV certificate and an indescribable look for free
Prices incl. VAT;
Rocksliders for Suzuki Jimny FJ Side Step
Side skirts with aluminum steps or steel The robust side skirts protect your Jimny off-road. The kicks were chamfered so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum / or steelColor: black powder-coatedSize: 129x41x28 cmWeight: 7.60 kg / 22 kg
Prices incl. VAT;
Retrofit kit for Mercedes G Rockslider
Retrofit kit for Mercedes G Rockslider The original screw points of the running boards must be present for the G-Slide to be fitted smoothly. If these screw points are not present, this retrofit set is available. Set consists of: 6x counter plate (79x60x6 mm), 1x threaded rod (M3x10), 6x washer (6.4x25x1.25), 6x hexagon socket head (M6x20)
Prices incl. VAT;
Rockslider LAPIS aluminum
Aluminium Rock Slider LAPIS - for various vehicles The front panel of this Rockslider is reinforced with "dimple die" beads and the steps can be unscrewed or replaced if necessary.The holes in the Rockslider can, if the running boards are not used, be closed with the screws provided. The connection to the vehicle is via the existing threaded inserts on the underside of the body.For this, the Rockslider is bolted to the body with 6 M10 screws. Delivery: Rockslider left & right mounting hardware 4x tread installation instructions
Prices incl. VAT;