Interior
Seat cover for driver and passenger side Ineos Grenadier
Seat cover for driver and passenger side Ineos Grenadier The Ineos Grenadier is designed to be the successor to the old Land Rover Defender. You won’t find any gimmicks in the Grenadier but loads of functionality and robust simplicity. This principle also applies to the front seats by Recaro. While they provide a lot of support off-road, they are at the same time quite comfortable, both when driving and when getting in or out of the car. Regardless whether you choose the Recaros with leather or fabric upholstery, our tailor-made protective covers for the Grenadier’s front seats function as a sturdy and versatile "battle suit" for tough off-road missions, long overland trips and everyday life. Our textile designers opted for a three-part concept to achieve a perfect fit for the compact, straight-lined seats. Apart from the headrest, there are two separate covers for backrest and seat. This allows for a firm and precise fit without bulging or sliding. The covers are fastened with straps (or velcro) and tucked into the gaps for an even tighter fit, both at the outer edges and between the backrest and the seat. The materials - 1000D nylon 6.6 and breathable nylon mesh - are hard-wearing and, above all, easy to clean. MOLLE on the headrest, backrest and the front edge of the seat offers additional storage space to attach equipment and accessory pouches. Cut-outs in the covers guarantee that operation, functionality and safety technology (e.g. airbags) remain unrestricted. Our seat covers are available in black with plain-colored MESH inserts. Material: nylon, PU-coated This item was designed in our in-house textile workshop. A dedicated team and short distances guarantee constant quality control and continuous development of our textile products. Thanks to our in-house workshop, we can easily accommodate customer requests for changes, custom designs and ideas for improvement at short notice. We promise to implement your requirements whenever possible. An email or phone call is all it takes! And by the way: at Nakatanenga we exclusively use materials with a 100% nylon PU coating for textile products. In contrast to PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers and are even used in food and cosmetics. However, due to their molecular nature, they accumulate in the environment and are suspected of acting like endogenous hormones. From a toxicological point of view this is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically sound and health-friendly alternatives such as nylon PU.
Prices incl. VAT;
Ventilation plates rear side window Škoda Kodiaq MY 2017-2023
Ventilation plates rear side window for Skoda Kodiaq MY2017-2023 Škoda Kodiaq II abMY2023 The Škoda Kodiaq is a spacious family SUV that is highly suitable for everyday use. Good air circulation as if the windows were slightly open, but without any increased risk of rain or theft? Plus reliable protection against insects? Our ventilation panels with mosquito nets, which are tailor-made for the Kodiaq and made of high-quality aluminum, achieve just that—no rattling universal solutions. Supplied in pairs and powder-coated in black, they improve the interior climate on hot days and long journeys. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: approx. 675 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga ventilation panels side window - Toyota LandCruiser J8 and J9
Nakatanenga ventilation panels side window - Toyota LandCruiser J8, J9 and J10 The Land Cruiser J8-J9-J10 is a simple, extremely robust classic off-road vehicle. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito nets, made to fit the Toyota Land Cruiser J and manufactured from solid aluminium — no improvised universal parts — make this possible. Supplied in pairs and powder-coated in black, they make long off-road journeys more bearable. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 560 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Window vent for lateral rear window - Jeep Wrangler Unlimited and JLU Gladiator
Nakatanenga window vent for lateral rear window of the Jeep Wrangler Unlimited JL from 2018 and JLU Gladiator Nakatanenga ventilation panels for the rear side windows of the Jeep Wrangler Unlimited JL from 2018 onwards and JLU Gladiator The modern Jeep Wrangler JL combines off-road capability with contemporary comfort. Good air circulation, as with slightly open windows, but without the increased risk of rainwater or theft? Plus reliable insect protection? Our ventilation panels with mosquito netting, precisely tailored to the Wrangler JL and made of sturdy aluminum, deliver just that — no rickety universal accessories. Supplied in pairs and powder-coated in black, they provide greater comfort in hot weather and when camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. The ventilation panels are supplied in pairs. Dimensions: 442 x 126 mm NOTE: Only suitable for 4-door models! <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Rubber floor mats, rear, for Land Rover Defender 110, MY 1987 - 2016
Rubber floor mat rear, for Defender 110Rubber mat for the 2nd row of the Land Rover Defender 110 Station Wagon 5-door, fits models from 1987 to 2016. Protect the interior of your Land Rover Defender 110 Strong, durable and tailored for a perfect fit, these rubber floor mats will protect your Defender from dirty, muddy boots and shoes. Product Information: Material: RubberColour: BlackPlacement: 2nd rowWeight: 5.47 kgWidth: 480 mmHeight: 25 mmLength: 870 mmScope of delivery: 1 pair
Prices incl. VAT;
Cargo net incl. fixing material, Suzuki Jimny II type GJ/HJ
Cargo net incl. fixing material, Suzuki Jimny II The smaller the car, the bigger the challenge to make the best use of available space inside. Our cargo mesh for the Suzuki Jimny II (from MY2018) will generate a lot of storage room in a place that’s rarely used: under the roof in the cargo bay.To attach the 93 x 60 cm netting to the roof trim, all you need to do is mount two aluminum frame elements in the front and the back. They are the same color as the mesh for a seamless look. The elastic cargo mesh can then be attached to the frame and the interior grab handles with 12 adjustable straps. To make it easier for you to fill the mesh space, there are also two click buckles in the front for easy access.Light and flat pieces of equipment, sleeping bags, textiles and the like will find the perfect storage space inside the mesh, even in a fully loaded Jimny.If you do not have handles on the headlining, 2 ring nuts are supplied to attach the net. Additionally, you can thread an elastic string in a zigzag shape on the underside of the netting for all those lighter items you want quick access to: light blankets, towels, swimming or sports gear etc.The cargo mesh comes in the colors black, gray and coyote. Please note: When ordering, please be sure to state in which model (GJ or HJ) you would like to install the Cargo Net, and also whether you have an interior light (Comfort Plus equipment) in the GJ model. Pictures may vary.
Prices incl. VAT;
Cargo Net Mesh for Land Rover Defender until BJ 2016
Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery: 1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here
Prices incl. VAT;
Dashboard Console for switches and additional instruments
Versatile console for installing 3 or 5 round instruments, switches, displays and sockets Console for installing either up to 3 or 5 round instruments (52 mm) or various switches, displays, sockets etc. Supplied unequipped! Whether rev counter, exhaust gas temperature display, our useful second-zone thermometer or a socket - over time, the need for flat surfaces in the vehicle cockpit that allow clean installation increases. With the two dashboard consoles, this problem is solved regardless of the vehicle - only a flat surface is required. The plastic front panel of the consoles can be easily cut out or drilled so that a variety of different displays, switches and instruments can be mounted. The console can be mounted vertically or suspended on any flat surface. It is ideal for accommodating the Carlingtech Contura switches, the VDO 52 mm round instruments or the BlueSea 12 V and double USB sockets. Dimensions DSBU-3: 230x105x80 mm Dimensions DSBU-5: 344x105x80 mm Please select the desired size of the console.
Prices incl. VAT;
Nakatanenga LED Interior Light Hunter, Universal (not Defender), warm white
Nakatanenga LED interior light Hunter, universal (not Defender), warm white In response to enquiries about how our Nakatanenga interior light for the Land Rover Defender can also be used in other vehicles, we have put together this set. It contains everything you need to use the light in cars, 4x4s, motorhomes etc. that do not have the original Land Rover interior light. Technical data: Light colour (warm white): 4,500 KelvinWavelength (red light): 625 nmVehicle voltage: 12 V (not suitable for 24 V vehicles!)Voltage range: 11-18 VPower consumption (at 12.8 V): 0.15 A (white light)Power consumption (at 12.8 V): 0.05 A (red light)
Prices incl. VAT;
Nakatanenga Sun Visor Wallet Card Holder black
Map Holder for Sun Visor Organiser Here you will find the ideal supplement for our sun visor organizers Version 2.0. The card holder offers various slots so you always have their parking and fuel cards and the most important debit cards at hand. Thanks to the simple Velcro attachment, you can always easily attach the holder to the sun visor organizer and remove it again.
Prices incl. VAT;
Nakatanenga Ventilation Panels Side Windows - Jeep Cherokee XJ (1984-2001), Nissan Navara D40
Nakatanenga ventilation panels side window - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 Suitable for: Jeep Cherokee XJ (1984-2001) Nissan Navara Double Cab D40 The Jeep Cherokee XJ and Nissan Navara are classics for off-road enthusiasts and individualists. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made of durable aluminum and tailored to fit the Cherokee XJ, make this possible — no comparison to rattling universal solutions. Powder-coated in black and supplied in pairs, they blend discreetly into the classic look and increase comfort on tours and excursions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 410 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Black Mesh" upholstery set for Land Rover Defender TD5
Black Mesh" upholstery kit for Land Rover Defender Included in delivery are all foam moulded parts, covers for seat and headrest, required fixing material and upholstery spray adhesive. Suitable for all front seats up to 2007 for Land Rover Defender TD5 (NOT suitable for TD4!!)
Prices incl. VAT;
Seat cover for Suzuki Jimny2 type GJ/HJ
Seat covers for Suzuki Jimny II (model: GJ, from year of manufacture: 2018 / model: HJ) Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. available in these variants: Driver's side Passenger side Rear seat Driver and passenger side Driver's side, front passenger's side and rear seat Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Prices incl. VAT;
Nakatanenga Valuables Case - cubby box raise
Nakatanenga Valuables Case - cubby box raise Nakatanenga valuables case and cubby box raiser for all Land Rover Defender 90/110/130 (all MY), mounted beneath the cubby box / centre console, with hidden lock, optinally with switches, 12 V and USB sockets. Provides additional storage space for all the odds and ends, like sun glasses, mobile phones, purses or other valuables. As it is mounted underneath the cubby box and features a hidden lock, this storage safe is hard to notice and thus gives additional security. Other such cases often only offer space for a few documents, while our safe is large enough to hold items of larger size, cameras, mobile, navigation devices, money, glasses, etc. Usable interior space 43x26x14 cm. In this is the new and improved version of our popular CUSADE the sockets have been replaced by waterproof heavy-duty items. You can optionally have double-sockets (for USB-A and USB-C) to allow for more than one device to be connected simultaneously, or have three 20 A rocker switches pre-installed to operate in-car electronic devices such as air supply, fride, LED worklights etc. The different front panels are available individually, so that you can change your configuraiton at a later time. When using the suitable twist-lock plugs, the 12 V sockets securely lock the plug in place, which is an additional advantage e.g. in severe off-road conditions. In vehicles with interior bulkhead the case can only be opened a few centimetres as the cubby box will then foul the bulkhead. This case can still be used for shallow items. Comes with two keys (which can be reordered).
Prices incl. VAT;
Nakatanenga seat console for sports seats
Nakatanenga Seat Bracket for Sports Seats Mounting bracket, non-folding, for sports seats, for Land Rover Defender 90/110/130, for seats with 405 mm seat rail distance, is attached to the original mounting points. Material: stainless steel, ceramic-blasted, optionally with additional black powder coating. The bracket is at the same time a seat rail extension by approx. 35mm, a combination with our seat rail extensions does not make sense (although technically feasible). The height of the console is 31 mm at the front and 61 mm at the rear.
Prices incl. VAT;
Door handle shells TREKFINDER for SUZUKI Jimny II from 10/2018, Typ GJ and HJ right & left side
TREKFINDER door protection - door handle shells for Suzuki Jimny II (GJ/HJ) The robust door handle moulding set from TREKFINDER reliably protects the sensitive areas around the door handles from scratches and damage - ideal for everyday and off-road use. Made from black plastic, suitable for the right and left side of the Suzuki Jimny II (model GJ from 10/2018 and model HJ).
Prices incl. VAT;
Seat cover for Land Rover New Defender 110/130, driver and passenger side, different colors
Seat cover for Land Rover New Defender 110/130, driver and passenger side This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture. To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls. As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently. Our seat protectors come in the colors Coyote or black with uni-colored mesh insets. Material: Nylon, PU-coated Not suitable for New Defender 90The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Prices incl. VAT;
Gearbox tunnel shelf R380 LHD
Transmission tunnel tray R380 LHD This transmission tunnel tray only fits Defender equipped with an R380 transmission, such as 300TDI or Td5.Moulded can holders, fitted with a neoprene insert, provide secure support for a wide range of standard drinks cans and bottles. No more pens and loose change disappearing into the depths of the dashboard. All these little things now find a safe place in this tray made of ABS plastic, which, thanks to its precisely fitting shape and the rubber lip all around, finds a stable hold on the gearstick lever base without any complicated assembly. This cardan tunnel tray ensures that you always have loose change, pens, mobile phone or torch to hand.
Prices incl. VAT;
MOMO TUNER STEERING WHEEL - BLACK, incl TREKFINDER steering wheel hub
MOMO steering wheel Model "Tuner" with TREKFINDER steering wheel hub - only available at Nakatanenga! ABE steering wheel and hub with TÜV parts certificate enclosed. A TÜV inspection is required. You need a steering wheel hub for the MOMO steering wheels. Horn: Black MOMO ItalyScrew: BlackSpoke Finish: BlackStitch: RedStyle: TuningDiameter: 350mm (13.78 in)Material: LeatherColour: Black
Prices incl. VAT;
MOMO TUNER STEERING WHEEL - SILVER, incl TREKFINDER steering wheel hub
Stylish MOMO TREK R steering wheel with chrome spoke and TREKFINDER hub MOMO steering wheel Model "Tuner" with TREKFINDER steering wheel hub - only available at Nakatanenga! ABE steering wheel and hub with TÜV parts certificate enclosed. A TÜV inspection is required. You need a steering wheel hub for the MOMO steering wheels. Horn: Black MOMO ItalyScrew: BlackSpoke Finish: BlackStyle: TuningDiameter: 350mm (13.78 in)Material: LeatherColour: Black
Prices incl. VAT;
Door Handle Exchange set Defender until MY2002
Door Handle Exchange set Defender until MY2002 In 2002, the Defender’s doors were re-designed to accommodate the first-ever introduction of electric power windows to the line-up. In the overhaul, the door-handles were updated, too. This complete door handle repair kit makes the replacement of broken or worn-out looking door handles in pre-2002 Defenders dead easy. The kit consists of two handles, all required fastening materials and seals, as well as three lock barrels including two keys each. The handles fit front and rear doors.
Prices incl. VAT;
Nakatanenga Seat Frame for Land Rover Series II / III
Secure seat installation in the Defender The seat console corresponds to the Land Rover part number 349996. Measurements: 450x465 mmMaterial: Steel, black powder coated You can contact us by E-Mail or telephone, if you want the deluxe seat with back rest and head rest or the deluxe seat with the back rest only.
Prices incl. VAT;
Nakatanenga Ventilation Panels Rear Side Window - Land Rover Freelander 2 (MY2006-2014)
Ventilation plates rear side windows - Land Rover Freelander 2 (MY2006-2014) Ventilation panels for rear side windows - Land Rover Freelander 2 (MY2006-2014) The Freelander 2 is the compact four-wheel drive vehicle for everyday use and leisure. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, precision-manufactured for the Freelander 2 from robust aluminum instead of rattling universal parts, make this possible. Supplied in pairs, powder-coated in black, they ensure pleasant air in the interior — practical when parking in the sun and on weekend trips. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Control panel PROFI 2 for Cubbybox
Switchboard PROFI 2 for Cubbybox New control panel Cubbybox Land Rover Defender made of high quality aluminium with 3 Profi switches with green LED lighting, circuit breaker and voltmeter for independent testing of 2 different batteries, cigarette lighter with socket, rubber cover and fuse, 190 x 132 mm.
Prices incl. VAT;
Retrofit seat heater Deluxe 12V
Retrofittable seat heating Deluxe 12V The high-quality carbon seat heating system was developed for retrofitting in individual seats.You can switch off the heat supply of the carbon surface heating elements via a switch (0% power) or set it to one of 3 different heating modes: Mode 1: 25% power Mode 2: 50% power Mode 3: 75% power This three-stage system provides pleasant warmth within a few minutes. When a level is set, the heater heats up to 100% power in just two minutes and then adjusts down to the desired mode (25%, 50% or 75%). This allows the carbon panel heating elements to reach the desired heat output much more quickly. The button or switch indicates the current level via three LEDs integrated into the button. The button can easily be stuck horizontally or vertically anywhere. Three adjustable levels and remarkably fast temperature regulation make this seat heater unique. Differences between carbon panel heating elements and heating elements using stranded wire technology: The carbon panel heating elements have considerable advantages over the previously widely used heating elements with stranded wire technology. For example, only carbon heating elements can be adapted and trimmed during installation. With conventional stranded wire technology, a heating wire runs inside the heating element in the form of a wave. If this is damaged at any point, e.g. due to mechanical stress or overheating, the entire heating element fails. Parallel technology is used in the new carbon surface heating elements. Many independent carbon heating fibers run inside the heating element, ensuring its reliability. The heat distribution is much more homogeneous and therefore more pleasant with carbon panel heating elements. Scope of delivery: 2 carbon heating mats (one for the seat and one for the back) 1 wiring harness 1 button incl. necessary installation material and installation instructions Technical data: Size of the heating mats: 645 x 250 mm (can be trimmed according to the installation instructions) Operating voltage: 9.6 V - 15 V Operating temperature range: -20 °C to +80 °C Power: up to 90W@13.8V Certification: ECE, EMC
Prices incl. VAT;
Switch Panel for New Defender from MY 2020 onwards
Switch panel for New Defender from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.
Prices incl. VAT;
Rear storage compartment for Cubbybox in Land Rover Defender 90/110/130
Rear storage compartment for Cubbybox in Land Rover Defender 90/110/130 Storage compartment for mounting on the rear of the cubbybox in the Land Rover Defender 90/110/130, dimensions: 265x232x133 mm (WxHxD), colour: blackThe storage compartment is screwed to the rear of the original or aftermarket cubbybox of the Land Rover Defender and offers space for maps, CDs, bottles and numerous other things that want to be stored in the cockpit of the vehicle.The product is compatible with our valuables compartment and parking heater console. Foot space for rear seat passengers is restricted in the Cubby Box area. Delivery without Cubby box.
Prices incl. VAT;
Nakatanenga window vent insert - Jeep Wrangler Unlimited JK
Ventilation plates for the rear side windows of the Jeep Wrangler Unlimited JK built up to 2018 The Jeep Wrangler JK is built for adventure and off-road use. Good air circulation, like with slightly open windows, but without a larger opening for rain or theft? And protection from insects at the same time? That's what our ventilation panels with mosquito nets offer, made specifically for the Wrangler JK and made of aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for camping, beach days, and longer breaks outdoors. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 475 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Seat cover for Suzuki Jimny 1
Seat covers for Suzuki Jimny I Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. Available for: Suzuki Jimny I Set consists of: Driver's side, passenger's side Colour: Coyote, Black, Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Prices incl. VAT;
Lever lock with lock and key, stainless steel set of 2 pcs
Secure Stainless Steel Toggle Latch in a Practical Set Versatile lever lock made of stainless steel.This closure is ideally suited e.g. for DIY projects, transport boxes and much more. Due to the quick and easy assembly, this closure is the absolute all-rounder. The robust lever lock is equipped with lock and matching key. Available in a set of 2, 5 or 10 pieces Basic information: spring-loaded stainless steel lockable
Prices incl. VAT;
Bulkhead Removal Bar for Land Rover Defender 90ST / 110HT
Maximize Comfort and Space in Your Land Rover Defender 90ST or 110HT with the Nakatanenga Bulkhead Removal Kit For many Land Rover Defender drivers, the legendary vehicle is more than just a means of transport – it's a statement, an adventure companion, and a loyal partner off-road. However, especially on longer tours or for taller individuals, the space in the cabin of the Defender 90ST (Station Wagon) and 110HT (Hardtop) models with the factory-fitted bulkhead can reach its limits. Nakatanenga, your specialist for high-quality off-road accessories, offers the ideal solution for this: a well-thought-out bulkhead removal kit. More Legroom and an Optimized Seating Position The main advantage of the Nakatanenga bulkhead removal kit is the significant gain in comfort. By modifying or partially removing the bulkhead, which is located directly behind the front seats, it becomes possible to recline and move the seats further palavras-chave. This results in noticeably more legroom and allows for a more relaxed and ergonomic seating position. Drivers and passengers over 1.80 m (approx. 5'11") tall will particularly appreciate this difference. An Airier Feel and Improved Access to the Cargo Area In addition to the extra legroom, the bulkhead modification also creates a more open and airy feel in the front of the vehicle. The separation between the driver's cabin and the cargo area, often perceived as somewhat restrictive, is opened up. This also facilitates quick access to items transported in the rear of the vehicle. Well-Engineered Design for Stability and Safety The Nakatanenga removal kit is designed to continue to ensure the necessary stability of the vehicle body. The kit includes a sturdy bar that partially takes over the original function of the bulkhead in terms of stiffening the body. This way, the structural integrity of your Defender is maintained even after the conversion. Delivery includes high-strength mounting hardware. Easy Installation and High-Quality Materials Nakatanenga places great emphasis on precisely fitting components and the simplest possible installation. The kit is designed to be mounted on existing attachment points, which reduces the installation effort. The components themselves are made of powder-coated steel to guarantee durability and resistance even under demanding off-road conditions. Nakatanenga – Your Partner for Defender Optimizations As a recognized specialist for Land Rover accessories, Nakatanenga offers a wide range of products designed to make your Defender even more capable, comfortable, and individual. The bulkhead removal kit for the Defender 90ST and 110HT fits seamlessly into this range and represents a sensible investment for any Defender owner who values more comfort and an optimized interior. Discover the possibilities of taking your Land Rover Defender to a new level with Nakatanenga accessories now. The conversion kit is suitable for vehicles manufactured up to 2015.
Prices incl. VAT;
Scheelmann Seat Configurator Traveller LR Edition
Configure your Scheelmann Traveller LR Edition seat (driver or passenger side) Comfort seat with folding seat cushion for Land Rover Defender, high lateral support in the back and comfort headrest, seat part with flat side bolsters, high backrest and with multiple configuration options! The Traveller LR Edition with folding seat allows access to the Land Rover Defender's on-board electrical system in no time. With the high design side bolsters in the back section, this model offers plenty of lateral support and perfect seat position. The adjustable fully upholstered headrest completes the seating comfort. Please note: On all seats our bear logo is discreetly embroidered in the backrest (below the headrest)!
Prices incl. VAT;
Interior Accessories for Off-Road Vehicles – Comfort and Functionality for Every Adventure
The interior of an off-road vehicle is more than just aesthetics – it provides comfort, protection, and practical functionality, even in the most demanding conditions. From durable floor mats to ergonomic seats and premium steering wheels, the right interior accessories let you customize your vehicle to your exact needs. Our off-road shop offers a comprehensive selection of interior components specifically designed for rugged use.
Key Interior Components and Their Benefits
High-quality interior accessories enhance your driving experience while protecting your vehicle from wear and tear.
Steering Wheels
-
Ergonomic Design: Ensures precise control on challenging trails
-
Durable Materials: Built to withstand intensive use
-
Custom Styles: Upgrade your cabin with personalized designs
Dash Panels & Consoles
-
Smart Storage: Extra space for gear, maps, and essentials
-
Perfect Fit: Vehicle-specific designs for seamless integration
-
Rugged Construction: Resists dirt, moisture, and daily abuse
Floor & Cargo Mats
-
Maximum Protection: Keeps mud, water, and debris contained
-
Anti-Slip Surface: Improves driving safety
-
Easy Cleanup: Simplifies interior maintenance
Seats & Seat Covers
-
Ergonomic Support: Comfort for long expeditions
-
Heavy-Duty Fabrics: Resists stains and wear
-
Removable & Washable: Hassle-free cleaning
-
Custom Looks: Personalize with colors and materials
Our Off-Road Interior Selection
We carry premium interior upgrades for 4x4s and adventure vehicles:
🔹 Steering Wheels: Sporty designs with enhanced grip
🔹 Dash Panels: Integrated features like cup holders and USB ports
🔹 Floor Protection: Custom-fit mats for complete coverage
🔹 Seat Solutions: Comfortable, durable, and easy to maintain
Selection & Care Tips
✔ Ensure perfect fitment for your vehicle model
✔ Choose materials that match your off-road needs
✔ Clean regularly to maintain appearance and function
✔ Tailor your setup for comfort, storage, or protection
Expert Advice
Our team will help you:
• Select the right interior upgrades
• Choose durable, easy-to-clean materials
• Create a personalized cabin space
Pro Tip: Quality interior accessories don't just improve comfort – they help preserve your vehicle's long-term value.
Explore our interior collection and transform your off-roader's cabin today!