Airline mounting rail accessorcy, screw fitting with M8 nut Steel galvanized

Airline mounting rail accessorcy, screw fitting with M8 nut Steel galvanized, blue passivated

High-quality airline/lashing rail made of aluminium.This is the angular slim version, which is ideally suited for lowering into the floor of your vehicle, for example. The lashing rail is ideal for securing fixtures in touring vehicles, for securing loads on roof racks or on the loading area of a pickup truck. Dimensions:Length: free choice of length in 10 cm increments.Length 1.975 mwidth: 25 mmHeight: 9.5 mm Please note:As there are so many different uses and we don't know your requirements, we need you to tell us what length and denomination of lashing rails you need. Please enter this in the free field at the end of the ordering process.

1x Anti seize paste for universal use, 250 g. heat resistant up to 1100 ° C, high pressure resistant and lead free prevents corrosion and galling resistant to alkalis and acids universally applicable for assembly, screwing and as lubricant against seizure and protection of screw threads, link tools, rotary axes, etc.

Saving Bundle! Here you get the perfect set for your load securing! Simply add additional attachment points to your vehicle.The lashing points and single studs are flexible and therefore always in the right place!Fast and safe installation. One bundle consists of:6 pieces lashing points (diameter 45 mm, thickness 10.3 mm)6 pieces Single Stud (load 300 kg, ring diameter 40 mm, anodized aluminum, UV and salt water resistant) 5 sets (30 pieces lashing points + 30 pieces single studs) cost only 100€! Only while supplies last!* Compared to single purchase

Cargo rail nut 2.0 available in size M8 and V4A precision casting and thus best suited for exterior use. The nut is held securel in place with the stainless clip and can stay in place all the time. This makes it interesting for interior use, too, e.g. when fixtures have to be removed temporarily from the vehicle and will be fitted to the same place again. There are no protruding bolts, the nut can stay at its place, fitting is facilitated as the clip can cope with lateral force before fully tightening down, too. Once torqued down, the ribbed outer of the nut tightly grabs into the cargo rail, preventing any twisting or movement under load. The cargo rail nut 2.0 allows flush fitting of optional equipment and fixtures as the nut sits level with the rail and does not protrude above it. Additionally the clip acts as a washer, thus increasing the contact area, expecially in the rounded version of the airline cargo rails, while also protecting painting/anodisation. Four markers facilitate to mark the drill centre. Advantages: rustfree - nut made of high-quality V4A precision casting, clip of stainless EN 1.4310 steel simple handling - fit nut, secure with clip, bolt on equipment innovative - can be fitted to ANY part of the cargo rail and doesn't have to be pushed in from the side nut sits level and does not protrude - equipment can be bolted on flush secure - sits securely in the rail and stays where it was fitted - does not get out of place, even with nothing bolted to it. Markers in the clip to facilitate drilling, clip acts as a washer.

End cap for airline cargo rail, rounded The end cap for airline cargo rails enhances the looks and protects from injuries. Material: plasticsColour: grey  

GMB watertight Mounting Adhesive for sand plate holder Defender 1x Watertight glue for sand plate holder, 70 mltemperature resistant -40°C to 90°C colour: white

High-tensile aluminium airline cargo rail with anodized outer, UV and saltwater resistant, length: 1.975 m, weight: 1.4 kg, price per metre: EUR 17,-; dimensions: 50x1,975x12 mm. Not approved for passenger transport or aviation. These airline cargo rails made to our specifications cater for the market niche between cheap low-cost offers of dubious quality and high-priced rails for passenger transportation or aviation use. Our cargo rails are best suited to secure loads and fixtures in expedition vehicles, on roof racks or load bays.

Lashing rail accessories, screw fitting M8x45 with nut and washer.

Lashing rail fitting, double stud Double stud fitting for airline cargo lashing rails, load capacity 1,100 kg, ring diameter 40 mm, manufactured according to ISO 9788, galvanised steel, UV and salt water resistant.Please note: The studs are delivered either in yellow passivated or silver passivated, depending on availability.

Lashing rails, Lashing rail accessories, lashing point round, silver Color: silver, diameter 45 mm, thickness 10.3 mm.

Clamp lock or also called lashing strap with clamp lock are ideal for securing loads in cars, trailers, vans or lorries. Quick and easy to use, they can be used to bundle wood, secure boxes on a pallet and much more. Scope of delivery: 1 piece 25mm wide 2m long for 400kg tensile force

Single Stud Fitting For airline cargo lashing rails, load capacity 300 kg, ring diameter 40 mm, manufactured according to ISO 9788, anodised aluminium, UV and salt water resistant. This single stud also fits our Cargobear. Please note: Depending on availability, the Single Stud is delivered in blue or grey.

Single stud fitting for airline cargo rails Working load: 300 kg Ring diametre: 40 mmMaterial: anodized aluminium Made according to ISO 9788, UV-light and saltwater resistant.

Sliding block for airline rails, galvanized steel M6, fitting 2xM6 Ideally suited for attachment to lashing rails. Galvanized, 2x M6 thread

Slot nut for gutter/rail for New Defender Slot nut for NewDefender 1x M8 thread Stainless steel suitable for NewDefender Rail

Practical and high-quality tensioning and fastening belt set for many different applications. The set is not only suitable for tensing or fastening of many things, but can also be used ideally together with our Tailgate Organizer. The 25mm width is perfect for all Molle loops. Thus, for example, Fix jackets, blankets and much more simply, quickly and comfortably. The set consists of:2 straps with 50 cm2 straps with 75 cm2 straps with 125 cm The straps are all 25 mm wide. Material: 100% nylon blackBuckles: Duraflex

Available in: 1 m or 10 cm steps (free choice of length) - max. 25m in one piece Please note:Since there are so many different possible uses and we do not know your requirements, we need the information from you about the length and denomination of the profiles you need. Please enter this in the free field at the end of the ordering process. One thing is certain: airline lashing rails would have to be invented if they didn’t exist already. Few systems for securing cargo are simultaneously as flexible, robust and safe. If you ever had to tie down large, unwieldy or sensitive objects in your cargo hold or on the roof rack, you’ll know what we mean. So how do you actually improve lashing rails? By clicking rubber covers by Trekfinder into unused tracks. A simple, fast and secure solution. The rubber strips add little height with 3.5 mm and prevent dirt and dust from clogging fully or partially unused rails. This is particularly important in cargo holds or on open trailers, because dirt clogged rails make it harder to attach fittings and studs. The same goes for winter weather when snow and ice can render exposed rails next to useless. The rubber strips feature a ribbed surface to improve load safety. Loads that are positioned on top of the rubbers won’t slip or slide as easily. On roof racks, wind noises are being reduced and if you have mounted airline rails sideways on the rack or the vehicle itself, the rubbers prevent vegetation from getting trapped when off-roading. That’s a lot of bang for your buck. The rubber covers can be ordered in widths of 23 mm or 30 mm