TLC PRO Air Compressor Kit P/N 42046 – 150 PSI / 2.62 CFM The TLC PRO was made for the adventure enthusiast who wants the best equipment for on-the-go bike maintenance and vehicle tire inflation. The kit features a 30ft coil hose, a shop-style inflator with rotating Presta and Schrader attachments and a blow gun. The compressor charges the air reservoir to 150PSI, storing enough air to provide a blast for seating tubeless bicycle tires, performing blowing tasks, running certain air tools and it is capable of inflating RV and truck tires up to 35”. The TLC PRO comes in a deluxe carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it.SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 150 PSI Max. Amp Draw: 30-Amps Ingress Protection Rating: IP54 Dimensions: 10.87″L x 5.83″W x 7.48″H Net Weight: 11.80 lbs. Power Cord Length: 8 ft. Air Hose Length: 30 ft. * For 12V Only. FEATURES: Shop-Style Inflator with 160 PSI Gauge Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose Blow Gun Extruded Aluminum Air Tank 2-Pin SAE Connection with Battery Terminal and Clamp Options 40-Amp Inline Fuse Holder Vibration-Resistant Diamond-Plate Sand Tray Deluxe Carry Bag  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2 Bar – 0-50 PSI/ 0-3,4 Bar  0-20 PSI/0-1,3 Bar – 0-40 PSI/0-2,7 Bar  25mm - 5 sec. 10 sec.  35mm - 3 sec. 6 sec.  2.0″  - 5 sec. 12 sec.  28mm - 7 sec 12 sec.  38mm - 3 sec. 7 sec.  2.3″  - 6 sec. 15 sec.  30mm - 8 sec. 14 sec.  42mm - 4 sec. 9 sec.  2.6″  - 7 sec. 17 sec.  32mm - 10 sec. K.A.  45mm - 4 sec. 10 sec  3.0″  - 9 sec. 19 sec. FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 00 sec. (± 10 sec.)15 to 30 PSI 1 min. 35 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 4 min. 20 sec. (± 10 sec.)15 to 30 PSI 2 min. 05 sec. (± 05 sec.)35″ X 12.5″ 0 to 30 PSI 5 min. 20 sec. (± 15 sec.)15 to 30 PSI 2 min. 45 sec. (± 05 sec.)* Tolerances (±) define a range within which actual performance may fall. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 400P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 400P does not work with the VIAIR Winterization Kit.  

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.