VIAIR Tire pressure tester with drain function

TLC PLUS Automatic Portable Compresso Viair Part No. 00190 – 120 PSI / 1.61 CFM The TLC PLUS is a high-performance ultra compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges to 120PSI and it is capable of inflating vehicle tires up to 31”. The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. The TLC series is designed not only for off-road riders but also for cyclists. Thanks to the valve adapters supplied and the small integrated pressure reservoirs on the compressors, it is particularly well suited for fitting tubeless bicycle tyres. Technical data: 12-volt Permanent-magnet motor Duty cycle: 30 min. @ 30 PSI / 2.07 Bar Max. Working pressure: 120 PSI / 8.27 Bar Max. Current consumption: 23-Amp Protection class: IP54 Dimensions (LxWxH): 17.27cm x 9.4cm x 16.5cm Net weight: 5.75 lbs Power Cord Length: 12 ft. Scope of delivery: Thermal Overload Protector Shop-Style lnflator with 120 PSI Gauge 120 PSI / 8.27 Bar pressure gauge with rubber boot Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose 2-Pin SAE Connection with Battery Terminal and Clamp Options Deluxe carry bag BICYCLE TYRE INFLATION RATES:  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2,7 Bar – 0-50 PSI/0-3,4 Bar  0-20 PSI/0-1,38 Bar – 0-40 PSI/0-2,7 Bar  25mm 10 sec. 18 sec.  35mm 6 sec. 13 sec.  2.0″  11 sec. 22 sec.  28mm 13 sec. 21 sec.  38mm 7 sec. 15 sec.  2.3″  14 sec. 26 sec.  30mm 16 sec. 25 sec.  42mm 8 sec. 17 sec.  2.6″  16 sec. 30 sec.  32mm 18 sec. K.A.  45mm 9 sec. 19 sec.  3.0″  18 sec. 35 sec. Inflation times vehicle tyre size: 0-20 PSI/195/70R14 :20 to 30 PSI / 1.4 to 2.1 BAR - 35 sec (± 05 sec).30 to 40 PSI / 2 to 2.7 BAR - 40 sec (± 05 sec)225/60R1820 to 30 PSI / 1.4 to 2.1 BAR - 50 sec (± 05 sec)30 to 40 PSI / 2.1 to 2.7 BAR - 1 min. 05 sec. (± 05 sec.)31″x10.5″0 to 30 PSI / 0 to 2.1 BAR - 5 min. 10 sec. (±15 sec.)15 to 30 PSI / 1 to 2.1 BAR 2 min. 45 sec. (±10 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering.  

VIAIR replacement metal filter housing Suitable for the following VIAIR compressors: 420C Compressor460C Compressor480C Compressor300P Portable Compressor300P-RVS Portable Compressor400P Portable Compressor400P Automatic Portable Compressor400P-RV Automatic Portable Compressor400P-RVS Automatic Portable Compressor440P Portable Compressor450P Automatic Portable Compressor450P-RV Automatic Portable Compressor450P-RVS Automatic Portable Compressor

VIAIR tyre inflator gun with integrated bleed valve Reads pressure up to 200 PSI and 14 BAR. This useful tool has a normally closed air chuck that can be opened by pressing the lever on the tyre inflator gun. Since the air chuck is normally closed, the tyre inflator gun is a perfect complement to on-board air systems and VIAIR's line of automatic shut-off portable compressors.Please note: Only compatible with VIAR portable compressors with automatic shut-off.- Integrated bleed valve for pressure regulation.- Air chuck with locking lever- 1/4″ quick connector- Closed release valve

VIAIR 89P-RVS – Portable 12V Compressor for 4x4, Off-Road & Motorhomes The VIAIR 89P-RVS is a powerful portable 12V compressor for demanding mobile use. With a maximum working pressure of 120 PSI / 8.2 bar, high air flow and a long 6 m air hose, it is particularly suitable for larger 4x4 vehicles, SUVs, campervans and motorhomes with large or high-pressure tyre combinations. Its strengths become especially apparent during off-road use. Reducing tyre pressure for improved traction and comfort on sand, gravel or rough terrain is common practice – but the tyres then need to be brought back to road pressure before continuing on paved roads. The 89P-RVS provides a compact and reliable solution for repeated airing down and airing up without depending on a petrol station or workshop compressor. The compressor is suitable for tyre sizes up to 245/70 R19.5 and can therefore also handle the higher tyre pressures typically found on heavier vehicles. Most Class B motorhome tyres, for example, can be inflated from 80 to 90 PSI / 5.5 to 6.2 bar in less than two minutes. Power is supplied directly from the vehicle battery via the supplied battery clamps. Combined with the 6 m air hose, this allows convenient access to front and rear tyres even on larger vehicles. Original VIAIR Part Number (P/N): 00089Model: VIAIR 89P-RVS Technical specifications: Operating voltage: 12 V Supply voltage: up to 13.8 V Maximum tyre size: 245/70 R19.5 Air flow at 0 bar: 41.7 l/min Air flow at 3 bar: 31.5 l/min Air flow at 5 bar: 23.6 l/min Air flow at 7 bar: 14.9 l/min Maximum working pressure: 120 PSI / 8.2 bar Maximum current draw: 20 A Duty cycle: 25 minutes at 30 PSI / approx. 2 bar Operating temperature: -20 °C to +70 °C Protection rating: IP53 Dimensions: approx. 25 × 8.1 × 14.2 cm Net weight: approx. 2.15 kg Power cable length: approx. 3 m Air hose length: approx. 6 m Integrated on/off switch Designed for demanding 4x4 and off-road use: Suitable for larger 4x4, SUV, campervan and motorhome tyre combinations Ideal for restoring road pressure after deliberately airing down tyres off-road High maximum pressure of 120 PSI / 8.2 bar Long 6 m air hose for easy access to all four wheels Direct connection to the vehicle battery for reliable power supply Solid brass screw-on tyre chuck Pressure gauge integrated into the compressor Stainless-steel valves for durability and consistent performance Anodised cylinder surface for increased wear resistance PTFE piston ring for low-friction operation and long service life Large cooling fins for efficient heat dissipation Integrated thermal overload protection Typical inflation times: 50 to 60 PSI / 3.4 to 4.1 bar: approx. 1 min. 11 sec. (± 5 sec.) 60 to 80 PSI / 4.1 to 5.5 bar: approx. 3 min. 28 sec. (± 10 sec.) 80 to 90 PSI / 5.5 to 6.2 bar: approx. 1 min. 40 sec. (± 5 sec.) Scope of delivery: 1 × VIAIR 89P-RVS 12V compressor 1 × approx. 6 m air hose 1 × approx. 3 m power cable with battery clamps 1 × solid brass screw-on tyre chuck 1 × integrated pressure gauge 3 × inflation adapters 1 × Presta valve adapter 1 × deluxe carry bag For 4x4 travel, expeditions and heavier vehicles Large tyre volumes and higher vehicle weights place considerably greater demands on a portable compressor than occasional pressure correction on a passenger car. The VIAIR 89P-RVS is designed for applications where tyre pressure needs to be adjusted reliably and repeatedly while travelling. This is particularly relevant for off-road driving: lowering tyre pressure can increase the tyre footprint and improve traction and ride comfort on loose or uneven surfaces. Before returning to normal road use, the tyres must be inflated to the pressure specified for the vehicle. A portable compressor such as the 89P-RVS makes this possible independently of external compressed-air supplies. The combination of compact dimensions, direct battery connection, high working pressure and a 6 m hose makes the compressor particularly practical for 4x4 touring, overlanding, campervans and motorhomes. Note on off-road use: When operating the compressor in dusty or sandy environments, it should be positioned away from loose dust and dirt whenever possible. Operation directly on sandy or dusty ground should be avoided. An elevated and preferably protected position, for example inside the vehicle or on the load area, helps to minimise the intake of fine particles. For particularly intensive continuous operation, very large tyre volumes or extreme off-road applications, a larger VIAIR compressor may be the more suitable choice. Suitable alternatives from the VIAIR range: VIAIR 400P-A portable 12V compressor with automatic shut-off VIAIR 450P-A portable 12V compressor with automatic shut-off

When it counts: 2.5 litre stainless steel compressed air tank for travel & off-road use An air pressure tank with 2.5L capacity, but only 77 mm in diameter, for all the difficult mounting spots. Stackable and completely manufactured from stainless steel, this tank is pressure checked and available by itself and as a bundle. When you're out on an adventure there is never a gasstation when you need one, especially when you desperately need petrol or air. But since you won't get around airing down on rough trails or in the desert sand, you will need a compressor either way. A compressor is certainly the easyest way to handle this frequent change in tirepressure, depending on the terrain, but a compressor always needs an air pressure tank, which is always either too small or when appropriate too big to be mounted anywhere efficiently. This problem can now be solved by this tank, because with a diameter of only 77 mm this tank can be squeezed in various different spots all around the car. Thanks to this the stackability of the tank allows you to easyly reach a capacity that enables the use of air pressure tools. While welding the tank it's impinged with forming gas to make the tank completely corrosion free and the pressure test guatantees incredible longevity. As a source for the pressurized air we recomend one of the highly sought after VIAIR compressors. Beware: none of the necessary hoses are come with the tank since the hose-lenght varies depending on the desired mounting point. Dimensions:Length: about 63 cmTube outside diameter: 76 mmHeight incl base feet: 88 mm

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.

VIAIR 5-in-1 Inflator/Air Deflator Spiral Hose Fabric Reinforced 120 PSI MANOMETER - fabric reinforced spiral hose- Continuous inflation/deflation- Internally braided with quick release couplings- Intermittent deflation- 1/4" quick release coupling with male thread- 3-piece set of inflation nozzles- Air chuck with locking lever- incl. storage bagPlease store the hose in the supplied bag when not in use.Make sure that the hose does not come into contact with the head of the compressor during use (risk of melting).

Compressor connection kit with 4 nozzles - suitable for many inflatables Connection kit for all compressors. The kit consists of 5 parts - 1 adapter + 4 pcs nozzle versions. Use a compressor or tyre pump to reach the recommended PSI within minutes. The adapter with its variable nozzle guides is also suitable for most paddle boards (SUP), canoes, rubber boats, swim rings,inflatable beds,kayaks etc.