Retaining clip bonnet support Land Rover Defender Td5 / Td4 up to MY2016

Lockable wheel nut set in black for Land Rover New Defender L663 & Discovery 3/4 Black alloy wheels deserve a sleek finish – and that’s exactly what this high-quality wheel nut set is designed for. The lockable OEM wheel nuts complement dark alloy wheels perfectly whilst also enhancing the vehicle’s security. The Satin Black finish with a gloss black plastic insert blends discreetly and elegantly into the overall look. Ideal for anyone who values a harmonious appearance, precisely fitting components and reliable performance in their Land Rover. The wheel nut set is specifically designed for the Land Rover New Defender L663 and Discovery 3 and 4, and is suitable for original Land Rover alloy wheels with flush-fitting nuts.   Advantages at a glance Lockable wheel nuts for greater protection against unauthorised removal Suitable for Land Rover New Defender L663 and Discovery 3/4 Satin Black with glossy black plastic insert Discreet appearance, ideal for black or dark alloy wheels Available as individual wheel nuts or as a lockable set Important note: These wheel nuts are suitable exclusively for original Land Rover wheels with flat-seated nuts. Please check the fit for your rims before ordering. IF YOU HAVE ANY QUESTIONS ABOUT FITMENT, PLEASE CONTACT US.  

Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style Give your Land Rover Defender an upgrade that combines style, robustness and durability in equal measure! With our galvanised doors in the iconic Land Rover series style, you can transform your Defender from 1983 to 2016 not only visually, but also functionally. The advantage of galvanising - your protection against rust: You know the problem: rust is the arch enemy of every Defender. Our doors put an end to this problem! Thanks to the high-quality hot-dip galvanisation of the frames and internal components, these doors are extremely resistant to corrosion and moisture. That means for you: Less worries about rust, more enjoyment of your vehicle - for many years to come. Style series: classic look meets modern benefits: These two-part doors in retro design are a real statement. The special feature: The upper door section with sliding window is removable - ideal for all soft-top variants or simply to be even closer to nature when travelling off-road. The pre-assembled, pre-glazed upper sections come complete with all seals and running rails, so you can get started straight away. Sophisticated design for maximum performance: No hassle with window regulators: The simple sliding windows do not require vulnerable cranks, which prevents jamming or catching. More security: The improved lock design of the handles is much more stable and tamper-proof, which increases the security of your Defender. Slim & practical: The absence of massive interior panelling gives you valuable legroom, and the slimmer door (without protruding handles) is a clear advantage off-road. Ready for your colour: The doors can be painted directly in the colour of your car to perfectly match your individual look. Our galvanised doors are not only more durable and robust than conventional doors, but also a more cost-effective alternative to current push-button doors. They are manufactured to the highest quality standards and guarantee an excellent fit. The scope of delivery includes everything you need for the conversion: two fully glazed upper door sections, hot-dip galvanised cappings, hot-dip galvanised lower door sections, handle units, locking devices for the sliding windows, locking cylinders with keys as well as lock latches and seals. Detailed description: What are the advantages of the two-part doors compared to the original doors? In addition to the significantly lower price for the series-style doors, it is primarily the design and construction. Instead of the push-button handles on the standard doors, there are recessed lever handles as on the rear. Due to their design, these handles are significantly more resistant to break-ins because they are fitted with a stronger latch mechanism. They also do not protrude, which can make all the difference when driving off-road or through narrow passages. The retro doors also save space in the interior, which will be appreciated by any tall driver who otherwise has to make do with seat rails and small steering wheels. The window section with sliding panes made of high-quality glass is completely removable, which is particularly attractive for soft-top owners. What's more, you never have to worry about the window lifting mechanism again. No compromises are made in terms of quality and installation with these installation kits. The frames of the doors and window sections are hot-dip galvanised and the sheet metal corresponds to the factory specifications of the original parts. The two-piece retro doors fit all Defender models from 90 to 130 from 1983 to 2016 and are supplied with all the necessary fixings, handles, locks, strikers and seals. They are designed so that standard door functions such as alarm system contacts and automatic interior light switch-on continue to work. Two holes only need to be drilled in the door frame for the strikers, as these are located in a different position on the door frame due to the design. A drilling template is included. The series-style conversion kits can be ordered in pairs for the front and/or rear. Upgrade your Land Rover Defender with these indestructible and stylish doors and be ready for any adventure - with Nakatanenga!

AIR INTAKE / AIR INTAKE WOLF XD STYLE, year of construction 1994-2016 „Wolf“ Military Defenders see action in all climate zones and all kinds of environmental conditions. From the wet and cold in the north to the mud of the tropics and the sand and dust of the deserts. One specific modification for these extreme challenges can be spotted with the naked eye: the air intakes. When not equipped with snorkels, XD Landy-wolves feature raised air intakes, often on both sides, to keep water, mud and dust out of the intake system. If you want to give your civilian Landy (with intake on the right) this military Wolf look, you can replace the standard grill with our Wolf XD Style Air Intake. This is not only a great visual upgrade to your Defender, but also protects your intake system from splash water, mud and dust. Due to its design, the Wolf Style intakes will already pre-filter a lot of unwanted stuff getting near your intake, especially when compared to the standard grills. So, if you’re aiming at an upgrade in design and performance, but don’t want to spend the 600 € or more for the hard-to-get original parts (ESR4570), the Wolf XD Style Air Intakes are the ones for you. For off-roaders with truly amphibious ambitions, who rather have water in the footwells than the intakes, we recommend our SN4 or SNX snorkels, of course. Installing the Wolf Style Air Intake is really easy. The frame can be attached to the pre-existing screw holes. The intake itself and the gasket are then in turn attached to the frame. All fastening materials are included. Delivery: Frame, intake case, gasket, fastening material. Will only fit Defenders with air intake on the RIGHT. Please note: Depending on the year of manufacture, the hole pattern on the fender may not match the hole pattern of the retaining frame exactly and adjustment work may be necessary.

Hinge solutions for front, centre and rear doors - Defender & Series Door hinge set for front doors for all Defender / Series III Door hinge set for rear door for all Defender, Series II & III Door Hinge Set for Middle (2nd) Door Row for all Defender Steel fixing bolt set included in delivery

Defender Brake Caliper Bundle with Stainless Steel Pistons – High-Quality Components for Long-Lasting Repairs Matching brake calipers, high-quality stainless steel pistons and everything in one package. Corroded or seized brake pistons are a familiar problem on Land Rover Defenders, particularly on vehicles regularly used off-road, during winter or on salt-treated roads. Our brake caliper bundle provides a practical, carefully considered solution for repairing the braking system. The bundle combines brake calipers of original equipment quality with our specially manufactured stainless steel brake pistons. We have selected the matching components for each vehicle version, saving you the trouble of sourcing and ordering all the required parts individually. High-Quality Stainless Steel Pistons Instead of Conventional Steel Pistons Not all stainless steel is created equal. We have our brake pistons manufactured to our specifications by a specialised European precision engineering company. We deliberately use high-quality, particularly hard stainless steel combined with a carefully engineered surface finish. Many inexpensive stainless steel brake pistons are made from comparatively soft material. Our pistons, by contrast, feature significantly greater material hardness. This makes them more resistant to mechanical damage and ensures a robust surface even after years of demanding use. Functionally Optimised Surface Instead of a Mirror Polish The surface of our stainless steel brake pistons is carefully machined and deliberately not polished to a mirror finish. There is a technical reason for this: When the brakes are applied, the piston moves outwards, slightly deforming the sealing ring inside the brake caliper. When brake pressure is released, the elastic recovery of the sealing ring helps retract the piston. The interaction between the piston surface and the seal is crucial. A suitable surface texture contributes to controlled friction characteristics and therefore to reliable piston retraction. Our surface treatment is therefore not a cosmetic compromise, but an integral part of the technical design. Corrosion Resistant and Designed for Long-Term Use Corroded brake pistons are a familiar problem, particularly on Defenders used off-road, during winter or on salt-treated roads. Rust on the piston surface can damage the seals and cause the pistons to become stiff or seize. Our stainless steel pistons offer a significant advantage over conventional steel pistons. Their high corrosion resistance reduces the risk of corrosion-related damage and provides a solid foundation for reliable, long-term brake caliper operation. The Bundle: All the Matching Components in One Package Anyone wishing to equip their Defender brake calipers with high-quality stainless steel pistons needs the correct calipers and matching pistons. To save you the trouble of sourcing and ordering each component individually, we have put together a carefully matched bundle containing the required parts. The package combines brake calipers of original equipment quality with our specially manufactured stainless steel brake pistons. All components are supplied separately and assembled, ready for professional installation as part of the repair. This saves you the time and effort of sourcing individual parts and provides the matching components conveniently in a single order. Key Benefits at a Glance Carefully matched bundle of brake calipers and stainless steel brake pistons Brake calipers of original equipment quality High-quality stainless steel brake pistons manufactured in Europe Particularly hard stainless steel with excellent resistance to mechanical damage Carefully engineered, functionally optimised piston surface finish No purely cosmetic mirror polishing High corrosion resistance compared with conventional steel pistons Matching components selected for the respective vehicle version No need to source individual parts separately Designed for long-lasting repairs to the Defender braking system Available Versions Defender 110 / 130 – rear axle from model year 2002 onwards Defender 90 – rear axle from model year 1994 onwards Defender 110 / 130 from model year 1994 onwards and Defender 90 – front axle with ventilated brake discs Scope of Delivery: A bundle of brake calipers and matching stainless steel brake pistons, selected to suit the chosen vehicle and brake caliper version. All components are supplied unassembled. Note: Please check the correct version against your vehicle and existing braking system before ordering. Installation must be carried out professionally.