USB socket for Land Rover Defender Td5, Td4, Tdci

Terrafirma Multi-function 8-way switch panel system If you are looking to fit LED lights to your vehicle but are put off with all the wiring? This 8-way switch panel allows you to wire up eight different lights or accessories while only having one switch panel mounted in the cab of the vehicle. No more drilling lots of holes with separate switches and relays. Simply connect your lights to the main fused control board and run one control wire through to the cab area. This then allows you to control all eight devices separately. A  Sheet with 50 switch symbol stickers is also included so you can customise your touch screen panel to match your lights. Product information: Maximum Power - 600 w - 1200 w Maximum Current - 60 A Input 12 v to 24 v Outlets - 2 x 30 amp, 2 x 20 amp, 2 x 10 amp and 2 x 5 amp IP67 rated What's included: Touch Screen Panel (115 mm x 66 mm x 15 mm) Circuit Control Box (162 mm x 110 mm x 34 mm) Fuses Switch Panel Brackets Voltage Protection Breaker Circuit Box Brackets Sheet with 50 switch symbol stickers Battery Cables & Wire harness Screws & Mounting Hardware

MUD Retrofit Switches for Land Rover Defender Td4/Td5 – Fits Original Switch Mountings Looking to retrofit additional work lights, a winch or other electrical functions to your Defender? The MUD switches for Land Rover Defender Td4 and Td5 make it easier to integrate additional electrical accessories into the vehicle's wiring and fit directly into the original switch openings in the Defender dashboard. The switches have the same installation dimensions as the corresponding original Land Rover switches and can be fitted into existing unused switch positions. The original switch mounting frame remains in place, so no additional switch holder is required where a suitable opening is available. Easier Wiring Compared with Many Original Switches Original Land Rover switches are designed for the factory electrical system. When retrofitting additional electrical functions, MUD switches offer several practical advantages: Fits original switch mountings: The switches fit directly into the existing switch positions in the Defender Td4/Td5 dashboard. Straightforward electrical connection: MUD switches use conventional positive switching. Many original Land Rover switches use negative switching, which requires consideration when installing additional accessories. No special Land Rover connectors required: Electrical connections are made using four standard 2.8 mm blade terminals. Flexible positioning: MUD switches do not have position-specific mechanical locating tabs and can therefore be installed in any suitable unused switch opening. Appearance matching the original switches: The colour, shape and soft-touch operation are designed to match the factory switches. Green symbol illumination and an orange switch-on indicator complement the existing dashboard lighting. Available Switch Versions The switches are available with different function symbols for various electrical applications: Blanking plug Dipped beam Front differential lock LED Low beam POD 2, black matt POD 2, glossy matt Worklight Rear worklight Interior lighting Seat heating Spot USB-C socket USB extension socket Heated mirrors Cable Winch Rear differential lock Blank with light (Without symbol) Matching switch mounts: Precisely fitting switch housings and mounting brackets (available HERE in our shop) can be combined with the switches in various configurations. This provides a suitable mounting solution for different installation positions in the cockpit. Technical Specifications Vehicle compatibility: Land Rover Defender Td5 and Td4 (Tdci/Puma) Operating voltage: 12 V Maximum switching load: 3 A Switch function: Latching on/off switch Switching type: Positive switching Connections: 4 × 2.8 mm blade terminals Background illumination: Green Switch-on indicator: Orange Operation: Soft-touch Terminal Connections Pin 1: Positive power supply Pin 2: Dashboard illumination input Pin 3: Switched positive output Pin 4 (silver terminal): Earth Scope of delivery: 1 MUD switch in the selected version. Important note: The switches are rated for a maximum of 3 A and must be used with a relay, as specified by the manufacturer. They are designed for custom electrical retrofits and are not direct plug-and-play replacements for factory-wired Land Rover switches.

Switch for indicators, high beam and horn for Land Rover Defender suitable for Land Rover Defende from VIN ...WA138480 (Defender TD5 from MY1998) to FIN ...EA999999 (Defender TD4 up to MY2014)

Highflow racing air filter for Land Rover Defender Td5 2.5, Land Rover Discovery Td5 2.5, Land Rover Discovery II 4.0, Range Rover I and II 3.9/4.0/4.6. The engine needs air for its combustion process. This air is sucked in via the air filter. As it is best to optimize all steps of the combustion process, like chip tuning which modifies combustion on the engine level, the air intake system should also be optimized for maximum performance. The first and most cost-effective step should be to swap the standard OE air filter for one with higher air flow. K&N are the inventors and producers of the original when it comes to washable, reusable high-performance filters. Each filter has been optimized for more performance and lifelong service. The filter effect stays the same throughout all its use, and apart from the legally required warranty, K&N gives a 1,600,000 km warranty on any of their filters. Cleaning is usually not necessary during the first 80,000 km. Trust the 35-year-long experience of the market leader for high-performance air filters! We offer K&N filters for most passenger vehicles and 4x4. Buy K&N and experience the difference: 1,600,000 km warranty in addition to the normal liability claims. improves performance - higher air throughput means higher speed-up cost-efficient; one K&N filter for the whole lifetime of your car, motorbike or 4x4 no TUV testing necessary used in racing - world number 1 in motoring cotton, washable up to 40% higher throughput saves maintenance costs - no new OE filter with each service Long-lasting and reusable – thanks to its long service life and washable design, the filter does not require regular replacement. usually only needs to be cleaned every 80.000 km No more filter changes - the oil proofed cotton gauze means maintenance free lifespan, the filter only needs to be washed occasionally and oil re-applied. The filer only needs to be cleaned if there is a  2-3 mm layer of dirt on the filter gauze. Please use only K&N cleaning kit for your K&N air filter.

Nakatanenga Double Socket USB and USB C Socket incl. Spacer USB socket type A and C, round, suitable for 12V and 24VInput: DC 12V-24V,Output: Type A (QC3.0 port): 3.6-12V / max. 36WOutput: Type C (QC4.0 port): 5V-20V / max. 60WWith the output type C can also charge laptops of any kind (slow charging)Hole diameter hole: 29mmPlease note the installation depth if you want to install the USB socket e.g. in a parking heater console or a valuables compartment. As the USB socket is slightly longer than a normal 12 volt socket due to the Quickcharge, please use the spacer supplied. Socket has an ON/OFF switch and PD technology.

High-quality light switch for Land Rover Defender Td5/Td4 Discover our high-quality light switch for the Land Rover Defender Td5/Td4. This suitable replacement is compatible with all models from VIN VA104806 to EA999999 and ensures reliable lighting control in your vehicle. Perfectly matched to your Defender, the switch offers easy installation and long-lasting quality. Rely on our solution to maintain and improve the functionality of your vehicle.    

Manifold mounting kit for Defender TD5 Complete kit for reliable sealing and mounting of the exhaust manifold on the Land Rover Defender TD5. Ideal for repair or replacement - all required components in one kit. incl. mounting material   The set contains 9 long stud bolts and 1 short stud bolt. The short stud bolt is fitted at the top left, as a long stud bolt in this position could get in the way or block the process of threading or fitting the manifold, thereby making the installation unnecessarily difficult.

Wiring harness injector Harness injector pump element suitable for Land Rover Defender Td5 and Discovery 2

Snorkel for Defender 300 Tdi, Td5 and Td4 Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, fitted to right-hand side. Material: aluminium, black powder coatedDiametre: 80 mmComes with cyclonic head and stainless fitting material for snorkel. Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.

Perfect fit & extremely hard-wearing Rubber floor mats for Land Rover Defender TD5 (front)  These rubber floor mats for the front footwell of your Land Rover Defender TD5 offer optimum protection against dirt, moisture and wear and tear - whether in everyday life, off-road or on long tours. Made from robust, durable material, they are precisely tailored to the contours of the TD5 and can withstand even the toughest conditions. For Land Rover Defender Td5, all models Scope of delivery: 2 piecesReplacement for LR original part number: STC50172

Universal console for Defender For radio, radio set, additional instruments etc., piece - delivery without instruments or switches.