Universal Air Vent (27 x 6 cm) with 60 mm Connection

Installation flange air heater for floors up to 48mm NEW: EVO version with even better thermal decoupling of the 4 fixing bolts!This flange allows the installation of an air heater in floors or walls with up to 48 mm wall thickness. Suitable for the Webasto and Eberspächer D2 parking heater.While an air heater is normally only suitable for installation in thin sheet metal walls or floors, with this flange an insulated floor construction with a wooden panel or directly a sandwich panel up to 48 mm thick can also be used. There is no need to scribe and drill the many different holes for combustion air, flue gas, fuel line and fixings - these are already integrated in the flange and allow the heater to be mounted directly in any direction. Only a rectangular cut-out of approx. 88x130 mm is required.Procedure:    Find a suitable flat installation location with max. 48 mm total thickness (e.g. floor panel+insulation+wood panel).    Cut a rectangular cut-out 88x130 mm.    Insert the installation flange with sealing compound and screw it in place.    Insert the heater from the inside into the flange and mount all hoses etc. from the outside.Stainless steel, laser-cut, welded, partially glass-bead blasted.Suitable for AUTOTERM air heaters (=Planar) 2D, 4D and 44D, as well as heaters with the same flange pattern from Eberspächer and possibly Webasto.

Planar 2D Auxiliary Vehicle Heater We offer the Planar 2D auxiliary vehicle heater as a well-priced, powerful alternative to our Webasto auxiliary vehicle heater kits. With their compact size and a heater output of 1.8 kW, the Planar 2D is well-suited for fitting to smaller vehicles, vans, off-roaders, camper vans, boats or in confined spaces. It is ideal for 'typical' off-road vehicles like the Land Rover Defender, Mercedes G oder Jeep Wrangler JK. The extensive fitting kit that is supplied with each heater make fitting easy. The Planar 2D can be easily controlled via its analogous control unit, with 8 settings available from 0,8 - 1,8 kW heat output. Available as both, 12 volts or 24 volts, this heater is European market approved (ECE label) and can thus be fitted independet of TUV approval. The parking heater has approval for the European market (ECE test mark) and can therefore be installed without registration. The hole pattern is the same as that of Eberspächer Airtronic and Webasto AirTop 2000 heaters, so that an old unit could easily be replaced without drilling additional holes.A space-saving version with a 90° angle can be found here.  All Planar auxiliary vehicle heaters are extremely long-lasting and durable, as well as very frugal. The heater can also be used while driving. And extensive range of additional equipment is available in our online shop. Attention Defender drivers: Our extensive Planar full-set for Land Rover Defender not only includes everything needed to perfectly fit the heater to your Tdi, Td5 or Td4 Defender, but also offers considerable savings over the individual purchase of all included items. Comes with: - 12 V or 24 V heater- Optionally analogue PU-5 control panel with rotary control or digital Comfort Control control panel with timer- Thomas Magnet P327" dosing pump- Exhaust silencer- Dosing pump rubber holder- Dosing pump wiring harness- Heater wiring harness- Intake air hose with integrated silencer- Heat protection hose- Exhaust pipe end piece + clamp- Tank intake pipe- 5.5 m fuel line- 300 mm fuel line connector- 1 m corrugated metal exhaust pipe- Fastening material (screws, nuts, clamps, heat-shrink tubing, cable ties)- Operating instructions Technical details: ·         fuel: diesel·         heat output: max. 1.8 kw, min. 0.8 kw·         air volume: max. 75 m³/h, min. 34 m³/h·         fuel consumption: max. 0.24 l/h, min. 0.1 l/h·         power drain: max. 29 W, min. 10 W·         manual start/stop→ On the Autoterm.cz website you will find a calculator for the correct dimensioning of the air heater The AUTOTERM Luft 2D (Planar 2D) is equipped with a height kit!This means that the heater automatically reduces the injection quantity according to the ambient air pressure. This reduces or prevents shooting of the combustion chamber when the atmospheric oxygen content drops. The max. Heating power drops in proportion to the amount of oxygen in the air. Roughly one can say: From 2.000 meters the loss of power per 500 m height is approx. 5%. Manufacturer tests up to 3.440 m were no problem. No difficulties are to be expected up to 4.000 m. The software itself calculates up to 5.000 m - however, this has not yet been tested in real height. The separately available control unit with timer (optional extra) features a larger OLED display and more intuitive operation. Temperature, ventilation and output can be configured via a display and various switches. An added timer clock allows you to set the heater to a specific time. OLED display provides maximum visibility with minimum power drain.  Possible settings:- temperature and output- time and date- language (English or Russian) Features of the new timer clock:- daily: one fixed time at which the heater starts each day- individual: up to thee different settings with different days and times. To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate. The improved new control unit is also available separately.  https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

Silencer for 60mm hot air hose This warm air silencer reduces the noise of incoming or heated air from the heating system. There are connections for the hot air pipes on both sides. Technical data: Connection dimension 60 mm Length of the silencer 300 mm Overall length 440 mm Silencer diameter 130 mm NOT for combustion air!

Magnetic Warm Air Connectors and Adapters – flexible, quick, and clean connection With our magnetic adapters for warm air hoses, connecting heating boxes, parking heaters, or other warm air systems is especially easy, quick, and convenient. The components are designed for a practical and clean connection and make coupling and uncoupling much easier – ideal wherever warm air needs to be routed flexibly or disconnected quickly when required. The system consists of the magnetic mounting flange 60 mm and the matching magnetic warm air connector 60 mm, or alternatively the magnetic warm air connector 60 mm, freely rotatable. Important: The mounting flange is the fixed receiving part and always requires a matching connector as its counterpart. Only this combination creates the complete magnetic connection. For additional flexibility, an adapter ring from 60 mm to 75 mm is available, allowing different hose diameters to be connected easily. The magnetic sealing cap fits exclusively on the mounting flange. It is used to close the mounting flange securely and cleanly when not in use. It is not intended for use on the magnetic connector or the freely rotatable connector. The magnetic connection allows quick installation and convenient handling in daily use. This makes the adapters ideal for mobile heating systems, camping conversions, workshop applications, or custom warm air routing in vehicles. Variants at a glance:• Magnetic mounting flange 60 mm• Magnetic warm air connector 60 mm• Magnetic warm air connector 60 mm, freely rotatable• Magnetic sealing cap for mounting flange• Adapter ring for warm air connector 60 mm to 75 mm Important notes:The mounting flange always requires a matching counterpart: magnetic warm air connector 60 mm or magnetic warm air connector 60 mm, freely rotatableThe sealing cap fits only on the mounting flange Advantages:• quick and easy connection of warm air systems• ideal for heating boxes, parking heaters, and custom solutions• convenient coupling and uncoupling thanks to the magnetic connection• clean and practical solution for mobile and fixed installations• flexibly expandable with matching connector and adapter solutions