Everything you need for maintenance: With the service kit, you can get your Jackall jack back into top shape - for reliable operation and maximum service life. Contains all the necessary wear parts for easy maintenance.

Safely stowed away, quickly to hand: The universal holder ensures that your Jackall trolley jack is held firmly in place - whether on the vehicle, in the workshop or on tour. Robust, practical and can be mounted anywhere

Top clamp for retrofitting: Suitable for the Jackall jack - ideal for replacing worn or damaged parts. Dimensions: 35 × 65 × 160 mm

Complete set: jack with accessories Car jack Bundle consisting of jack, yellow transport protection and protective cover. You can choose the bundle with different jacks: JackAll Jack, 60 inches / 152 cm JackAll jack, 48 inches / 122 cm

QUICK FIST Holder for Jack High Lifts & Stick Winches This Quickfist is suitable for round and square objects of 76-100 mm diameter (round up to 114 mm).Each holder has a payload of 23 kg. The holder can be easily attached with a 6mm screw (not included!). Tested according to AfPS GS 2014: 01 PAK Delivery:1 holderVisit our QUICKFIST product page to see more practical application examples of these ingenious holders. The Hi-Lift shown is not included in the scope of delivery.   Note: The holder can be positioned closer than shown in the picture. Nothing needs to be placed underneath. 

Protect the mechanics of your jack from contamination The protective cover is suitable for Hi-Lift X-treme jack, as well as for all similarly built jacks (JackAll / HiJack / HiLift / Farm Jack / High Lift / HiLift / High Jack). The highly water-repellent outdoor fabric is longitudinal and transverse elastic. The material is not only water-repellent but also extremely easy-care and quick-drying as well as washable at 30 ° CThe material is also used for outdoor clothing, sports, hiking and trekking clothing. Despite the elasticity of the shell is extremely resistant to abrasion. With the zipper we decided on a specially covered version, which prevents the zipper becoming dirty. The loop allows a practical hold when closing the shell. The closure does not have to be cumbersome hooked to the bottom, but can now be easily and conveniently closed from above. The big advantage, compared to the previous protective cover:The shell is higher The zipper is covered and hooked from the top. Material: 92% polyamide (nylon) / 8% spandexThe material is water repellent, quick drying, easy to clean and washable at 30 ° C Made in Germany!This item is made to high quality standards in our home tailor shop. ATTENTION:The cover covers the mechanics, not the whole jack!

Hi-Lift / JackAll Adapter for Land Rover Defender – Secure Hold for Heavy-Duty Tasks When the going gets tough off-road or maintenance work is due on your Land Rover Defender, a reliable jack like the Hi-Lift or JackAll is worth its weight in gold. However, to transfer its power safely and gently to the vehicle, the right adapter is required. The Nakatanenga Hi-Lift / JackAll Adapter has been specially developed for the original jacking points on the Land Rover Defender (90/110/130) and ensures safe and stable lifting of your vehicle. This robust adapter is simply attached to the lifting jaw of your Hi-Lift, JackAll, or a similarly constructed farm jack and inserted with a precise fit into the designated jacking points in the chassis or on appropriately equipped bumpers and sill protection tubes of your Defender. This effectively prevents the jack from slipping and minimises the risk of damage to the vehicle. Manufactured for demanding off-road use, this adapter impresses with its solid construction and durability – typical Nakatanenga quality. It is an indispensable accessory for every Defender owner who values maximum safety and efficiency when using their farm jack. The Advantages at a Glance: Safe Lifting: Provides a stable and secure connection between the jack and the vehicle. Perfect Fit for Defender: Designed for the original jacking points of the Land Rover Defender 90/110/130 as well as for many aftermarket bumpers and rock sliders with corresponding mounts. Protection for Your Vehicle: Reduces the risk of slipping and damage to the chassis or attachments. Robust Construction: Designed for tough off-road conditions and frequent use. Universally Applicable: Suitable for Hi-Lift, JackAll, Hilift, Jack-All, and similarly constructed farm jack models. Easy to Use: Quickly and easily attached to the jack and positioned on the vehicle. Technical Details : Material: High-strength steel Surface: Corrosion-resistant coating Scope of Delivery: 1x Hi-Lift / JackAll Adapter for Land Rover Defender Trust in proven Nakatanenga quality and equip your Land Rover Defender with this essential adapter for the safe use of your Hi-Lift or JackAll jack. Indispensable for every off-road tour and workshop. Note: The jack shown is not included in the scope of delivery.

HiLift jacking bracket for Defender 110 Station Wagon Whether off-road or in normal operation, a good ratchet jack like the Hi-Lift is unbeatable in many situations, not only for recovery, but as a mobile replacement winch, as a spreading tool and much more. The only disadvantage: Hi-Lift, JackAll and other identical jacks take up a lot of space with their non-dismountable length of usually 48"/122 cm and definitely do not fit under the driver's seat like the small OEM standard jacks. But fortunately there are also other seats in the Defender 110 Station Wagon. The cavity under the rear seat bench offers the perfect space for Hi-Lift, Hi-Lift X-treme, JackAll & Co with a length of 48"/122 cm. This means that the Jack can be reached quickly if necessary and doesn't get in the way in the slightest when you don't need it. Simply fold down the rear seat and you have easy access to the Hi-Lift. In addition, the interior of the van naturally also offers the best protection against rust and dirt. And to prevent the jack from slipping, hitting or rattling while riding, we have a genuine Nakatanenga solution: a high-quality stainless steel rail that is simply screwed onto the seat bench bearings and holds the jack firmly and rattle-free between two easy-grip knurled nuts and four rubber pads. Incidentally, we also include a yellow transport lock with every steel rail to ensure that the lever tube also fits securely and silently. Even though the bracket is designed to fit the Defender 110 rear bench perfectly, it can of course also be mounted on any other suitable surface, in the Defender, in other 4x4s, on the inside of the loading area or on the outside of the roof rack, for example.  Supplied without Hi-Lift Also suitable for JackAll 122 cm and other identical derivative products.