Terrafirma Multi-function 8-way switch panel system If you are looking to fit LED lights to your vehicle but are put off with all the wiring? This 8-way switch panel allows you to wire up eight different lights or accessories while only having one switch panel mounted in the cab of the vehicle. No more drilling lots of holes with separate switches and relays. Simply connect your lights to the main fused control board and run one control wire through to the cab area. This then allows you to control all eight devices separately. A  Sheet with 50 switch symbol stickers is also included so you can customise your touch screen panel to match your lights. Product information: Maximum Power - 600 w - 1200 w Maximum Current - 60 A Input 12 v to 24 v Outlets - 2 x 30 amp, 2 x 20 amp, 2 x 10 amp and 2 x 5 amp IP67 rated What's included: Touch Screen Panel (115 mm x 66 mm x 15 mm) Circuit Control Box (162 mm x 110 mm x 34 mm) Fuses Switch Panel Brackets Voltage Protection Breaker Circuit Box Brackets Sheet with 50 switch symbol stickers Battery Cables & Wire harness Screws & Mounting Hardware

BlueSea Dual USB built-in socket for Carling cut-outs USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12 V and 24 V on-board voltage and has a splash-proof cover.The socket in the form of the well-known Carlingtech Contura switches can be installed individually (please refer to the dimensioned drawing for the exact dimensions), in the Carling installation frames or in various consoles, such as:    on the A-pillar in the Jeep Wrangler JK    in the universal dashboard consoleSupplied without other accessories, if shown these are for illustration purposes only.

Carling Contura switch for winch, with mechanical protection. For controlling a winch relay, MOM/OFF/MOM switching,The switch offers the possibility to extend and retract the winch cable as well as a mechanical protection against accidental operation. The switch is used to control an existing relay box of the winch, this is not included!We recommend the additional combination with our switching relay, which switches the winch currentless. In this way, you can relaise a complete winch control with only two compact switches, combining comfort and safety.

On/Off switch, Carling Contura 2 switch positions; ON / OFF The green illumination fits the Defender dashboard lighting, the orange ON-position light is readily visible. This special colour coding of the switch positions is produced by MUD UK especially for us and is not available in this setting even at MUD.

Carling Contura On/Off/On switch The Carling Contura On/Off/On switch impresses with its robust finish made of thermoplastic polycarbonate and a non-slip soft-touch elastomer layer. The striking Contura II design with two rows of raised elements on the top and bottom of the rocker provides an appealing look and improved feel.Scope of delivery: 1 piece

Carling Contura switch, Momentary On/Off/Momentary On 3 switch positions; middle position = OFF, bottom/top = ON; after actuation, the switch automatically returns to the middle position.The green switch location lighting matches the defender-typical cockpit lighting, and the orange switch status indicator is particularly easy to recognise. This colour coding of the switch statuses is manufactured especially for us by MUD, UK, and is not available in this form from MUD.

Carling Contura switch, OFF/ON/ON The green illumination of the switches matches the typical defender cockpit lighting, the orange switch status indicator is particularly easy to recognise. This colour coding of the switch statuses is manufactured especially for us by MUD, UK, and is not available in this form from MUD.

Carling Contura Mounting Frame – Professional organization for your switches! Do you want to integrate additional switches for lights, a winch, or other accessories cleanly and professionally into your vehicle? Then our Carling Contura Mounting Frames are just the thing for you! With them, you create a tidy look and a stable mounting for your Carling Contura II, Contura V, and our Nakatanenga switches. Why these mounting frames? These frames are the perfect solution to elegantly and securely mount individual switches or entire switch groups in your cockpit or any other desired location. No more improvised solutions – achieve a professional result! Your advantages at a glance: Perfect Fit: Designed for switches with standard dimensions of 21 x 37 mm, as used with Carlingtech, ARB, and our Nakatanenga switches. Modular System: The frames are available as end pieces and middle pieces. This allows you to create switch groups of any size – from a single switch to an entire row. The end pieces are identical for both sides. Complete Frames Available: For even easier installation, complete frames for 1, 3, or 6 switches in one piece are also available. Clean Look: Integrate your switches seamlessly without visible screws or unsightly edges. Flexibility: With the optional blanking plugs, you can neatly close off unused spaces in your switch panel, giving you the option to retrofit at any time. Robust Quality: Manufactured for durable and stable mounting of your control elements. Design your cockpit individually and functionally! With these mounting frames, you not only give your vehicle interior a professional appearance but also ensure ergonomic and safe operation of your auxiliary consumers. Whether you only need a single switch for your new work lights or want to build a complete control center for your off-road equipment – with this system, you are well-equipped. Simply choose the appropriate end and middle pieces or one of the practical complete frames and bring order and style to your switch landscape!