Installation kit Suzuki Jimny GJ / HJ with Nolden 90mm combination fog light with daytime running light
Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life. With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light. Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play. If you only need the adapter cables, you can find them here. The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights. Scope of delivery: 1 x pair of Nolden 90 mm LED daytime running/fog lights chrome Adapter: 2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin. Note: The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard. Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).
Prices incl. VAT;
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.
Prices incl. VAT;