Nakatanenga ventilation sheets - Citroen Berlingo / Peugeot Rifter / Opel Combo / Toyota Proace City Verso
Nakatanenga ventilation panels, rear side window The precisely fitting ventilation panels are ideal for high-roof combi vans such as the Citroën Berlingo, Peugeot Rifter, Opel Combo and Toyota Proace City Verso. These vehicles in particular are often used as family cars, campers or transport vehicles for dogs – and benefit greatly from good air circulation in the interior. The robust, aluminium-made and black powder-coated panels can be inserted into the lowered side windows in just a few simple steps. They reliably provide fresh air without allowing rain or insects to enter the vehicle, while also reducing the risk of unauthorised access. This keeps the interior pleasant even on warm days, whether you are on the move or stationary. Installation is straightforward: lower the window, insert the panel and raise the window again – done. ⚠️ Important note: Even with ventilation panels in place, children and animals must not be left unattended in the vehicle. Suitable for: Citroën Berlingo K9 (2018 and later), Peugeot Rifter, including L2 seven-seater, Opel Combo and Toyota Proace City Verso (all from model year 2018 onwards) Note: only suitable for vehicles with optional equipment package (sliding doors in row 2 with lowerable side windows) Material: aluminium, black powder-coated Dimensions: 571 x 147 mm
Prices incl. VAT;
Nakatanenga Ventilation Panels Side Windows - Toyota LandCruiser J150 / J120
Ventilation panels side windows for Toyota LandCruiser J150 / J120 The J120 combines comfort with off-road capabilities for families and expeditions. The J150 is the modern flagship among Land Cruisers with high reliability. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection from insects? Our ventilation panels with mosquito nets, precision-manufactured for the J120 from high-quality aluminium — no rattling universal parts — offer just that. Supplied in pairs and powder-coated in black, they are ideal for long tours and periods of standing in the sun. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again — and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 610 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga side window ventilation panels rear - VW Passat, Estate B8 (BJ2014-2023)
Ventilation plates rear side window for VW Passat, Variant B8 (BJ2014-2023) The Passat Variant B8 is a spacious estate car suitable for everyday use by families and commuters. Good air circulation as if the windows were slightly open, but without any increased risk from rain or theft? Plus protection from insects? Our precisely manufactured ventilation panels with mosquito nets, tailored to the Passat Variant B8 and made of high-quality aluminium, achieve just that – no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure comfort when shopping, on holiday trips or when parking in the sun. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: approx. 675 mm
Prices incl. VAT;
Nakatanenga rear side window ventilation panels - Renault Kangoo, Nissan Townstar, Mercedes Citan / T-Class
Nakatanenga ventilation panels for rear side windows These are modern, compact city vans with practical interiors. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable insect protection? That's what our ventilation panels with mosquito nets offer, tailor-made for the Townstar and made of high-quality aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure fresh air during stops and when loading. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 505 mm. Suitable for: Renault Kangoo, Nissan Townstar, Mercedes Citan / T-Class from model year 2022 onwards. Note: Not suitable for versions with long wheelbase!
Prices incl. VAT;
Nakatanenga ventilation panels for side windows in front - Peugeot Boxer, Fiat Ducato, Citroen Jumper, Opel Movano
Nakatanenga ventilation panels side window in front As a spacious transporter and popular base for campers, these vehicles offer plenty of space. To keep the air inside fresh even when stationary, specially adapted ventilation panels ensure reliable ventilation without increasing the risk of rain or break-ins. The discreet design in black powder-coated aluminum also provides effective protection against insects and contributes to a pleasant climate – whether in everyday use or when camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 430 mm Suitable for: Citroën Jumper, Peugeot Boxer, and Fiat Ducato (all from model year 2006 onwards) as well as RAM Promaster (from model year 2013 onwards) and Opel Movano (from model year 2021 onwards) Material: Black powder-coated aluminum Ventilation plates on the driver and passenger sides must not be used while driving!
Prices incl. VAT;
Nakatanenga ventilation panels side windows - Nissan Pathfinder 3 MY 2008
ventilation panels side windows for Nissan Pathfinder 3 MY2008 The Nissan Pathfinder (3rd generation) is a versatile family and leisure SUV. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection from insects? Our custom-made ventilation panels with mosquito nets for the Pathfinder 3, made of sturdy aluminum, offer just that—no rattling universal accessories. Sold in pairs and powder-coated in black, they ensure pleasant air and comfort when traveling. Installation is easy: roll down the window, insert the ventilation panel, close the window again—and it's securely in place without rattling. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Ventilation plates rear side window Škoda Kodiaq MY 2017-2023
Ventilation plates rear side window for Skoda Kodiaq MY2017-2023 Škoda Kodiaq II abMY2023 The Škoda Kodiaq is a spacious family SUV that is highly suitable for everyday use. Good air circulation as if the windows were slightly open, but without any increased risk of rain or theft? Plus reliable protection against insects? Our ventilation panels with mosquito nets, which are tailor-made for the Kodiaq and made of high-quality aluminum, achieve just that—no rattling universal solutions. Supplied in pairs and powder-coated in black, they improve the interior climate on hot days and long journeys. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: approx. 675 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga ventilation panels side window - Toyota LandCruiser J8 and J9
Nakatanenga ventilation panels side window - Toyota LandCruiser J8, J9 and J10 The Land Cruiser J8-J9-J10 is a simple, extremely robust classic off-road vehicle. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito nets, made to fit the Toyota Land Cruiser J and manufactured from solid aluminium — no improvised universal parts — make this possible. Supplied in pairs and powder-coated in black, they make long off-road journeys more bearable. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 560 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga Ventilation Panels Rear Side Window - Land Rover Freelander 2 (MY2006-2014)
Ventilation plates rear side windows - Land Rover Freelander 2 (MY2006-2014) Ventilation panels for rear side windows - Land Rover Freelander 2 (MY2006-2014) The Freelander 2 is the compact four-wheel drive vehicle for everyday use and leisure. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, precision-manufactured for the Freelander 2 from robust aluminum instead of rattling universal parts, make this possible. Supplied in pairs, powder-coated in black, they ensure pleasant air in the interior — practical when parking in the sun and on weekend trips. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga ventilation plates front side windows - Mercedes Benz Sprinter
Nakatanenga ventilation plates for Mercedes Benz Sprinter and VW Crafter side windows front Sprinters are more versatile than vans, motorhome bases, or service vehicles. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus good protection from insects? That's what our ventilation panels with mosquito nets offer, precisely tailored to the front side windows of the Sprinter and made of sturdy aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure pleasant air in the cab, especially during longer periods of standing in the sun. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation plates in place. Length: 550 mm Material: Aluminum, black powder-coated Note: Ventilation plates on the driver's and passenger's side must not be used while driving! <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga Ventilation plates rear side window - Toyota Land Cruiser 76 and 79 Series
Nakatanenga window vent for lateral rear window of the Toyota Land Cruiser 76 and 79 Series The 76 Series is purist, robust and built for tough use. The 79 Series is a workhorse and at home in extreme conditions. Good air circulation as if the windows were slightly open, but without any increased risk of rain or theft? Plus reliable insect protection? That's what our ventilation panels with mosquito nets offer, specially manufactured for the 76/79 Series from solid aluminium — no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for emergency vehicles and expeditions. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. The ventilation panels are supplied in pairs. Dimensions: 442 x 126 mm Note: These ventilation plates were originally developed for the Jeep Wrangler. However, some of our customers use these ventilation plates for the Land Cruiser mentioned above. Due to the shape, there may be a small gap of 5-7 mm on the left or right between the plate and the window frame on the Land Cruiser. NOTE: Only suitable for 4-door models! <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga ventilation panels side window rear - Mercedes ML 270CDI W163
Ventilation plates rear side window for Mercedes ML 270CDI W163 / W164 The ML 270 (W163) was one of the early Mercedes SUVs and offers solid everyday practicality. Good air circulation as if the windows were slightly open, but without any major risk of rain or theft? Plus protection from insects? Our custom-fit ventilation panels with mosquito nets, made for the W163 from robust aluminum—no rattling universal parts—achieve just that. Sold in pairs and powder-coated in black, they improve comfort when stopping and camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 560 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga ventilation panels front side window- Peugeot Partner / Citroen Berlingo MY 2008-2018
Nakatanenga ventilation plates for Peugeot Partner / Citroen Berlingo MY 2008-2018 side windows front The Citroën Berlingo is a practical all-rounder that serves both families and tradespeople well. With the custom-fit ventilation panels for the front side windows, the interior remains pleasantly ventilated even on warm days, while rain, insects, and uninvited guests are reliably kept out. The robust, black powder-coated aluminum panels blend inconspicuously into the vehicle's appearance and ensure a pleasant climate – ideal for trips with dogs or longer breaks on the road. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 620 mm Material: Aluminum, black powder-coated Note: Ventilation panels on the driver's and passenger's side must not be used while driving! <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga Air Vents for side window rear - Range Rover Sport BJ 2006-2010
Air Vents for Range Rover Sport BJ 2006-2010 The Range Rover Sport combines sporty looks with luxurious comfort. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito nets, suitable for the Range Rover Sport and made of high-quality aluminum, deliver just that—no rattling universal parts. Supplied in pairs and powder-coated in black, they offer discreet functionality without detracting from the interior. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 505 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Cable winch system for Lada Niva
Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see table below! ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper!In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! Technical specifications: Engine:Motor power: 2,3 HPMotor type: permanent magnet (magnetic field is generated by means of a permanent magnet)Maximum power consumption: 180 ampsVoltage: 12 volts Transmission:3-stage planetary gearReduction: 166: 1 General data:Max pulling force: 2.300 kgMaximum train speed: 4 m / min (measured without load)Plastic rope (diameter x length): 6 mm x 25 mDrum (diameter x length): 63x139 mmOverall size (LxWxH): 465x158x215 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:- Cable remote control- rope window- fixing screws- Operation manual- hook TÜV for the following vehicle types: Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allMU2121 e2*KS07/46*0056* allMU2131 e2*KS07/46*0076* allM2131 e2 * KS07 / 46 * 0077 * .. all
Prices incl. VAT;
Expansion tank for Sankey Mark MK III
Equalising reservoir for Sankey Mark MK III Brake fluid reservoir for Sankey MK III / Mark III trailer7/16" connection, for hydraulic overrun brake, approx. 60mm diameter, reservoir with screw cap
Prices incl. VAT;
Nakatanenga ventilation plates side window - Dacia Duster Gen. 3 ab MY 2024
Ventilation grille rear side window - Dacia Duster Gen. 3 from model year 2024 The Dacia Duster Gen. 3 (from 2024 onwards) impresses with its robust design, versatility and high utility value – whether in everyday use, on trips or for outdoor activities. Our ventilation panels for the rear side windows, specially developed for this model, enable permanent, reliable ventilation of the vehicle without compromising on safety or comfort. They provide pleasant fresh air, reliably keep rain and insects out and at the same time offer effective protection against unauthorised access. Ideal not only for campers and dog owners, but also for preventing heat build-up when parking in direct sunlight. What's more, they are super easy to install: wind down the window, insert the ventilation panel, wind the window back up, and you're done! Supplied in pairs. Please note: In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!
Prices incl. VAT;
Nakatanenga ventilation panels, rear side windows – Škoda Octavia III estate, model year 2013–2020
Ventilation plates for rear side windows - Škoda Octavia III station wagon (2013-2020) The Škoda Octavia III estate car is a reliable companion for travelling and outdoor use. With the precisely manufactured ventilation panels for the rear side windows, you can noticeably improve the ventilation in your vehicle without compromising on safety or weather resistance. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again — and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 610 mm
Prices incl. VAT;
Cable winch set for Lada Niva / Taiga, including complete installation set
Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below! Technical specifications: Engine:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 166 : 13-stage planetary gear General data:Max pulling force: 3600 kgMaximum train speed: 5,5 m / min (measured without load)Plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:cable remote controlfairleadmounting screwsoperation manualhookBumpers spacers TÜV certificate for the following vehicles: Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allMU2121 e2*KS07/46*0056* allMU2121 e2*KS07/46*0076* all M2131 e2 * KS07 / 46 * 0077 * .. all
Prices incl. VAT;
Cable winch set for Lada Niva / Taiga including complete installation set
Cable winch set for Lada Niva / TaigaIncluding complete installation set The extremely robust bumper fits the original stops on the Lada. Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below.In the case of other vehicle types, the TÜV must be contacted in advance as to whether the part is entered as the equipment carrier. Technical data cable winch:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 210: 13-stage planetary gear Generally: Hornrope 7 to plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmNet weight: 32.8 kgGross weight: 35 kg Furnishing:Aluminum rope windowExtremely durable powder coatingStainless steel one-way clutch (decouple the gearbox to quickly unwind the rope by hand)Control box removable for mounting not directly on the winch Included accessories:Remote control with cableRope windowhookFixing screws 4xM10 We grant a 3-year guarantee on the gearbox and drum in compliance with the guarantee and service regulations. TÜV certificate is for the following vehicles: Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allM2131 e2 * KS07 / 46 * 0077 * .. all
Prices incl. VAT;
POWERspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012, clutch kit
POWERspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012 Clutch Kit The POWERspec is the next stage up, ideal if you use your Isuzu Rodeo as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Rodeo Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
LOF Clutches POWERspec Nissan X-Trail MKI 2.2 Di MY2001-2007 Clutch Kit
POWERspec Nissan X-Trail MKI 2.2 Di MY2001-2007 Clutch Kit The POWERspec is the next stage up, ideal if you use your Xtrail as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 9x Clutch cover bolts, coated in loctite 1x Nissan Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
Nakatanenga Ventilation plates rear side window for Mazda BT 50 MY 2012
Nakatanenga ventilation plates rear side windows - Mazda BT 50 MY 2012 The Mazda BT-50 is a reliable pickup truck for work and leisure. Good air circulation, as if the windows were slightly open, but without the risk of rain or theft? Plus protection from insects? That's what our specially designed ventilation panels with mosquito nets offer, made from aluminum specifically for the BT-50 — no wobbly universal parts. Supplied in pairs and powder-coated in black, they are ideal for tough jobs and leisure trips. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 660 mm
Prices incl. VAT;
POWERspec Suzuki Grand Vitara 1.6 4x4 MY1998-2006, Clutch kit
POWERspec Suzuki Grand Vitara 1.6 4x4 MY1998-2006, Clutch kit The POWERspec is the next stage up, ideal if you use your Trooper as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description: Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Vitara Pilot/ spigot bearing (6200-2RS-C3) 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
LOF Clutches POWERspec Suzuki SJ413 (Samurai) 1.3 4WD, MY1988-2004, clutch kit
POWERspec Suzuki SJ413 (Samurai) 1.3 4WD, MY1988-2004, Clutch kit The POWERspec is the next stage up, ideal if you use your Trooper as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description: Perfect for vehicles with Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD clutch plate, equipped with Woven organic 0.4μ high friction coefficient 1x LOF HD POWERspec clutch cover, +40% clamping force compared to original 1x LOF HD release bearing 6x clutch cover screws, coated with Loctite 1x SJ pilot/trunnion bearing (6200-2RS-C3) 1x LOF clutch alignment tool 10ml spline assembly grease 2 years LOF warranty
Prices incl. VAT;
LOF Clutches POWERspecNissan X-Trail MKII 2.0 dCi MY2007-2014 bis 172PS), Clutch kit for rigid flywheel
POWERspec Nissan Nissan X-Trail MKII 2.0 dCi MY2007-2014 bis 172PS *148/171 BHP* Solid mass flywheel clutch kit The POWERspec is the next stage up, ideal if you use your Xtrail as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF Solid mass flywheel 1x LOF HD release bearing 8x Flywheel bolts, coated in loctite 9x Clutch cover bolts, coated in loctite 1x Nissan Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty Legal notice: Due to technical changes, noise may be generated. This is technically harmless and therefore no reason for complaint! Installation at your own risk. Without guarantee for damage to gearbox and drive train.
Prices incl. VAT;
Heater resistor for Land Rover Series III and Triumph GT6 TR4 TR6
Heater Engine Resistor OEM Land Rover Series III Triumph GT6 TR4 TR6Reference number 7H6926.
Prices incl. VAT;
LOF Kupplungen ROADspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012, Kupplungssatz
ROADspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012, Clutch Kit The ROADspec is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard! (Pedal Weight not significantly Heavier than original) Description Perfect for vehicles with a Stage1 map/ Towing 1x LOF HD Drive plate, fitted with Woven organic friction 1x LOF HD ROADspec clutch cover, +20% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Isuzu Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
Air intake Bravo Snorkel, for Mercedes Sprinter W906 (MY 2006-2018) & VW Crafter (for MY 2006-2016)
Snorkel for Mercedes Sprinter & VW Crafter – Optimal Air Intake for Off-Road Use This increased air intake, Bravo Snorkel / Snorkel is suitable for Mercedes Sprinter W906 (MY 2006-2018) & VW Crafter (for MY 2006-2016) The snorkel / snorkel not only allows safe driving through deeper water points with reduced risk for the engine, it also brings advantages in dusty environments: The increased air intake ensures cleaner, less dusty air, the air filter must be replaced or cleaned less frequently.
Prices incl. VAT;
LOF CLutches POWERspec Isuzu Trooper 3.1 TD MY1991-1998, Clutch Kit
LOF CLutches POWERspec Isuzu Trooper 3.1 TD MY1991-1998, Clutch Kit The POWERspec is the next stage up, ideal if you use your Trooper as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Trooper Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;