CargoBear cross bars - Land Rover New Defender
Nakatanenga CargoBear cross bars There’s only one real alternative for the full CargoBear roof rack: the CargoBear cross bars on their own! If you don’t need the entire cargo platform on your New Defender, because you carry only long work equipment or sports gear like surfboards, skis or kayaks, the cross bars alone will do the job perfectly. The same applies for roof tent campers. For the new 110 Landy this means that the standard setup consists of 3 cross beams for the entire length of the roof. The sturdy bars will give you a roof rack that is significantly more robust than any off-the-shelf rooftop carrier. The cross bars are available single or as sets of 2 or 3. They are 100% identical to the ones we sell in the CargoBear kits, i.e. they are 1,450 mm wide (1,300 mm usable) and 120 mm long. The aluminum bars feature stainless steel bases that connect to the standard roof rail via inserted sliding blocks (included). As with the complete CargoBear platform, the bars can be mounted on two height levels, 80 or 100 mm respectively. Choosing the higher level will ensure that your roof window retains its full functionality. The crossbars feature a very wear and tear resistant matte black RAL 9005 powder-coating. A great number of recessed lashing slots allow you to attach lashing rings, brackets, hooks, stud fittings etc. You can also attach your lashing straps directly, of course. The standard CargoBear accessories will also fit the various lashing and mounting points. Thanks to the modular system, this makes a future upgrade to a full CargoBear platform absolutely hassle-free.
Prices incl. VAT;
CargoBear Awning Bracket for Land Rover New Defender from MY2020 onwards
Nakatanenga CargoBear - Awning holder for New Defender One of the best moments when car camping or at 4x4 meetings is unfolding the roof awning. It means you've arrived and the cozy part is about to begin. Once the awning is up, you can lounge in your camping chair, put your feet up and plan your next activities over a coffee or a cool drink. And since the CargoBear is also available for the New Defender, there is also the option of attaching numerous awnings and awnings. Our awning holders made of black powder-coated stainless steel are screwed onto the slope of at least two crossbars and are suitable for awnings such as the RoofLodge Awning, RhinoRack Foxwing and SunSeeker. The 3-piece set is supplied including the necessary mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included.
Prices incl. VAT;
CargoBear 2.0 system roof rack for Land Rover New Defender 110 from 2020 onwards
Nakatanenga CargoBear 2.0 system roof rack for Land Rover New Defender from 2020 onwards 110 CargoBear, meet the New Defender! New Defender, meet the CargoBear! Two legends are coming together for the first time: the new Land Rover Defender, arguably the most complete 4x4 off-road vehicle at present, and our tried and tested, very successful modular roof rack system CargoBear. The bear crowns every new Landy, whether it’s a 90 or a 110. At Nakatanenga, we took our time to finetune the CargoBear for every design detail, technical specification and user requirement the Defender L663 (from MY 2020) challenged us with. At its full length of 2.41 m, our rack consists of 3 crossbars, two platform elements as well as front and rear modules. The overall width of 1.20 m gives you almost 3 square meters of fully usable cargo space. The entire surface can be loaded and walked upon – a decisive advantage over many competing products. The CargoBear is screwed into the original mounting points of the roof rails which have to be removed, of course. Another great advantage over the competition is the fact that you can configure the CargoBear rack in two heights: At 100 mm, the glass roof – if you have one –remains fully functional. If your Defender doesn’t have a glass roof or if you prefer a lower, more streamlined profile, the rack can be mounted at only 80mm above the roof. Whether you’re choosing the high or low mount, aerodynamics was always our main concern in the CargoBear’s development. There are no legally required speed limits when driving with the rack, but we recommend a top speed of 160 km/h when empty and 130 km/h when loaded. For the overall load capacity please refer to your owner’s manual and the specific version or configuration of your vehicle. The roof rack’s weight of up to 50 kg has to be deducted from the dynamic load capacity. The new Defender’s overall look is perfectly complimented by the matte black powder coating of both aluminum and stainless steel elements. While the V-shaped rear module accommodates the antenna and the rear view camera and guarantees full functionality, the front element is specifically designed to easily integrate an Osram VX1000-CB or other light bars. New Defender and CargoBear – the ultimate combo for work, holiday or expedition! Material:Crossbars and Platform sheets: aluminum, matte black powder coatingMounting rails: stainless steel, matte black powder coating Further keywords for this item: cargo-bear, cargobear, CargoBear, roof-rack, roof rack
Prices incl. VAT;
Side Box for Land Rover New Defender from 2020, right side
Side Box for Land Rover New Defender from BJ 2020 With off-road vehicles like the New Defender, exterior cargo space is a great idea. After all, there are many pieces of gear and equipment that need to be quickly accessible but shouldn’t be kept on the inside, because they are either too filthy or they smell of gas, Diesel or other automotive chemicals. A perfect storage place for these things is our side-mounted storage box for the New Landy’s right side.* The side-mounted storage box is made from Plastic and offers a hefty 24 l of volume. It is mounted on the standard roof rail or on our CargoBear roof rack – adapters are included. Its size and the maximum load of 17 kg allow for a huge amount of equipment that can be stored here. Inside the box, there’s a built-in storage mesh for more safety and tidiness. The carrier can be locked and is also watertight, of course. For easier cleaning, there is a plughole with a rubber stopper in the bottom. The side-mounted cargo carrier is designed for maximum aerodynamics and the reduction of wind noise. Its color black compliments every New Defender and if you want to take customization even further, depressions on the lid are the perfect spot to attach one of our Land Rover logos. Please note:*The side-mounted carrier box can only be installed on the right and not together with the ladder. If you want both, the ladder must be mounted on the left side.The mounting screws should be regularly lubricated. Storage volume:24 lMaximum load:17 kg
Prices incl. VAT;