Additional reversing light for Land Rover New Defender from MY 2020-2025
Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.
Prices incl. VAT;
Additional interior light for Land Rover NEW DEFENDER from BJ 2020
Additional Interior Light for Land Rover NEW DEFENDER The new Defender is being marketed as a true workhorse, but – as always – there’s room for improvement when it comes to the practicalities of working with your L663 on a day-to-day basis. One such aspect is definitely the lighting for the load space in the back. The standard set-up is somewhat sparse but most of all it lacks proper roof lights. This is especially problematic since the cargo area is often filled up or modified by installed racks, boxes and the like. Our LED light bar solves this problem with more than sufficient 396 Lumens light intensity. The lightbar is easily installed on the trim above the cargo door and illuminates the entire load space – helping you to quickly find tools and equipment and ensuring safe working conditions day or night. Mounting the roughly 36 cm long and 2 cm wide LED lightbar is really easy. Simply click the two fastening clips into the edge of the upper door trim. The clips’ custom-shape will hold the lightbar firmly in position. Connecting the device to the Defender’s wiring is just as quick by simply pushing the LED bar’s wire behind the trim and pulling it along the D-pillar towards the standard lamp housing by the fuse box. In most cases, you won’t even have to remove the trim panels. Lastly, the LED bar’s connector is simply plugged into the standard lamp’s socket. The bar is activated and deactivated as required by its own touch button. Dimensions: 362mm x 25 mm x 11mm
Prices incl. VAT;
New Defender Integration Kit Bumper with Vision-X XPL curved LED Light Bar
The XPL Curved Lightbar is an extremely powerful installation solution for the slot of the standard radiator grille Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The XPL Curved Lightbar by Vision X is an elegant and powerful LED solution for the lower opening in the standard grille of the New Defender. The array of individual 5 W CREE LEDs delivers a light beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL Curved lightbar also features backlighting that can be used as daytime running lights. The installation is fairly simple and requires roughly 4 hrs. Both the grille’s plastic substructure and the lower opening need to be modified by sawing out specific areas. Detailed instructions, fastening materials and electric connections are included in the delivery. Mounting behind the radiator grille is also possible. Specifications for XPL Curved Lightbar: LEDs: 5W per LED Housing material: aluminium Light colour temperature: 6000 Kelvin Voltage: 9-32V DC Current: 3.12A~8.96A@24V DC - 6.25A~17.92A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Curved high power light bars Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, ECE R112 Thanks to our iris reflector technology and the unique curve of the bar, the XPL Curved series produces a wide spot beam pattern with a range of over 600 metres. Scope of delivery: Complete radiator grille set for New Defender with XPL-HC23 light bar, brackets and wiring harness including detailed installation instructions.
Prices incl. VAT;
Replacement circuit board for daytime running lights, New Defender – Headlight repair L663
Replacement circuit board for repairing daytime running lights – suitable for Land Rover New Defender headlights Get your daytime running lights working again: this high-quality replacement circuit board has been specially developed for repairing daytime running lights in the headlights of the Land Rover New Defender. Whether individual LED segments have failed or the lights have gone out completely, this circuit board enables reliable and cost-effective repair without having to replace the entire headlight. Please note: The headlight must be removed and opened for repair. This should only be carried out by qualified personnel. The headlight may no longer be watertight after this repair > condensation/droplets may form.
Prices incl. VAT;
Auxiliary Headlamp Holder for Land Rover New Defender
Universal Auxiliary Headlight Brackets for the New Defender Proper off-road vehicles aren’t really complete without additional front lights – on off-road tracks, in bad weather or on overland routes you simply can’t do without extra lighting. The new Defender has everything a heavy duty 4x4 needs, but the stylish body isn’t made for easily attaching extras like additional off-road lamps. Our versatile front light holders for the new Landy are specifically designed to easily mount off-road lights like our Vision-V GEN2 to the front of your L663 – most importantly, without any damage to the beautifully styled radiator grille. The holders are powder-coated in black and can be attached to the front grille in the exact position you require. The perfect fit is achieved by inserting the holder’s four lugs into the grille’s grid and fastening the unit by tightening the screw on the stainless-steel clamping plate. This creates a perfect fit and prevents the lights from moving or scratching the grille. Mounting the holders is a question of minutes and can be done entirely from the outside. The off-road light holders come in pairs.
Prices incl. VAT;
New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Single LED, MY 2021
New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Single LED Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The Cannon Light single-LED "light cannons" from Vision X are extremely powerful additional front headlights for uncomplicated installation in the slot of the standard radiator grille of the New Defender. The LEDs with 40 watts each guarantee excellent high beam illumination up to at least 1000 m and can be configured with different covers for up to 25 types of use - off-road as well as on the road, for sport or work. The lamp housing made of aluminium and polycarbonate is as light as it is robust and can be flexibly adjusted. The installation is fairly simple and requires roughly 4 hrs. Both the grille’s plastic substructure and the lower opening need to be modified by sawing out specific areas. Detailed instructions, fastening materials and electric connections are included in the delivery. Specifications for Cannon 4.7" Single LED: LEDs: Single LED 40W Housing material: Hybrid Light colour temperature: 6000 Kelvin Dimensions: 137/134/94mm Weight: 0,91 kg Voltage: 9-32V DC Current: 1.67A@24V DC - 3.33A@12V DC Vibration resistance: 21.2 Grms Lens material: Acrylic Certifications: CE, RoHS, IEC 62471 Weatherproof German plug The installation is minimally invasive. The installation kit is supplied with a ....contains all the necessary fixing materials and wiring. Scope of delivery: Complete radiator grille kit for New Defender with two CPZ110 GEN2 cannon headlights, brackets and wiring harness including detailed installation instructions.
Prices incl. VAT;
New Defender integration kit for the roof - carbon cover with 2x Vision-X XPL LED Light Bars.
XPL Carbon Roof Cap Kit is a high performance lightbar solution for the roof Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The XPL Carbon Roof Cap Kit by Vision X is an elegant and extremely powerful LED lightbar solution for the roof of new Defenders from MY 2021. The aerodynamically shaped carbon element holds two Vision X XPL Lo Pro light bars. The array of CREE LEDs produces 45 W per bar and a beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL light bar also features backlighting that can be used as daytime running lights. The installation on the roof is minimally invasive. The mounting kit contains a drill template, all required fastening and sealing materials as well as the electric connections. Specifications XPL Lo Pro Lightbars: LEDs: 5W per LED Housing material: Aluminum Light color temperature: 6000 Kelvin Voltage: 9-32V DC Current: 0.75A~7.5A@24V DC - 1.25A~15A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Dual mounting standard Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, E mark IRIS reflector technology The XPL is equipped with a backlit halo that can be used as a daytime running light. (SAE compliant for 20" and below). Scope of delivery: Complete carbon element with two XPL-H9 light strips, brackets and wiring harness including precise fitting drilling template.
Prices incl. VAT;
New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Multi LED, MY 2021
New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Multi LED Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The Cannon Light Multi-LED "light cannons" from Vision X are extremely powerful additional front headlights for uncomplicated installation in the slot of the standard radiator grille of the New Defender. The 7 Watt LEDs guarantee excellent high beam illumination up to at least 215 m and can be configured with different covers for up to 25 types of use - off-road as well as on-road, for sport or work. The aluminium and polycarbonate lamp housing is as light as it is robust and can be flexibly adjusted. Specifications for Cannon 4.7" MULTI LED: single LED: 7W Housing material: hybrid Light colour temperature: 6000 Kelvin Dimensions: 137/134/94mm Weight: 1,3 kg Voltage: 9-32V DC Current: 2.04A@24V DC - 4.08A@12V DC Vibration resistance: 21.2 Grms Lens material: Acrylic Certifications: CE, RoHS, IEC 62471 Weatherproof German plug The installation is minimally invasive. The installation kit is supplied with a ....contains all the necessary fixing materials and wiring. Scope of delivery: Complete radiator grille kit for New Defender with two CPZ710 GEN2 cannon headlights, brackets and wiring harness including detailed installation instructions.
Prices incl. VAT;