Re-usable Face Masks with Changeable Filters Made in Germany In the West, we can take a lot of inspiration from the East when it comes to preventing the spread of infections for oneself and others. In Asia, face masks are an integral part of everyday life. Often still frowned upon in our culture, the experience during the lockdown has made us more pragmatic, not the least due to recommendations by the Robert-Koch-Institute or various international medical associations. According to many experts, even simple home-made masks without FFP2/3 certification can significantly reduce the risk of becoming infected and, more importantly, to spread infections to others.The Nakatanenga face mask is extremely robust, reusable, made of mesh on the outside and a replaceable 3-layer filter layer on the inside. The mesh material of the mask wearer is normally used in rucksacks and many of our bags, so it is extremely resistant, but on its own without any protective effect. The fleece for the filter inserts comes from industry, but is free of chemical pollutants and does not put additional strain on the organism. The inner lining is made from original Coolmax®, usually applied in sports and outdoor clothes. Coolmax® is skin-friendly, fast drying and wicks away moisture. The anatomic fit and an adaptable rubber cord with a stopper make this mask very comfortable to wear, thereby increasing the protective effect.The mix of high-quality materials and the design based on expert recommendations lets us offer a long lived and robust mask for repeated use, made in EU. To ensure optimum efficiency, the mask should be worn for the maximum duration of one day. After that it should ideally be machine washed with regular detergent. Wash as often as possible. General opinion among medical professionals considers 60°C as sufficient, but you can also wash it at 90°C. Swap the changeable filters during the course of the day. CAUTION: do not use fabric softeners, as they can destroy the fleece’s filtering capacity. Do not tumble dry. We explicitly state that our face masks are NOT medical masks with certified protection against COVID19 and other pathogens. But since there is still a shortage of medical protection equipment and the proper personal protective equipment is best employed in hospitals and by first responders, we want to help wherever we can. That’s why we are producing our masks based on recommendations by scientists and the medical authorities, advising that fabric masks can reduce the risk of airborne infection. This is primarily aimed at the risk to transmit infections to others. Our Nakatanenga masks are available in sizes M and L. M generally fits women and smaller persons, L is for men. You can order the masks in the colors Coyote or Black. The lining can vary because we are using materials that are currently available or in stock. The red mask’s lining is turquois. Material mask: polyester / Coolmax ®Material filter: polypropylene / polyester Delivery includes the outer mask and one filter. Changeable filters can be ordered separately in sets of 3 or 5. Please stay healthy! PLEASE NOTE:Due to hygienic reasons, this product can’t be exchanged or returned.

The following values ​​are calculated and displayed under microprocessor control: - Current solar power 0 - 999 W (watt) - Current solar power 0 - 60.0 A (ampere) - The geographic and weather-dependent influences show up immediately and unmistakably. This also applies to the orientation of the sun, partial shading or soiling of the solar modules. - Current solar battery voltage 7 - 32.0 V (volts) Allows conclusions to be drawn about the battery status (flashing warning display at under or Overvoltage of the battery) - Invited solar capacity 0 - 9999 Ah (ampere hours) - Invited solar energy 0 - 9999 kWh (kilowatt hours) The energy generated by the solar modules (Wh and kWh) and that charged into the battery Capacity (Ah) are measured, added up and displayed, even over days and weeks. The display values ​​can be individually reset to "zero" at any time for your own statistical purposes: Are the solar modules shaded or dirty or is something wrong? How much energy does my solar system actually deliver?In order to be able to answer these questions, VOTRONIC offers the LCD solar computer S, which is simply connected to the VOTRONIC solar charge controller of the SR and MPP series and immediately provides the required information. It is also possible to connect the LCD solar computer S to the controller at a later date, since the VOTRONIC solar charge controller already has are ready to plug in and provide the required signals. The connection is therefore kept extremely simple. The measured values ​​are clear and easy to use at the push of a button for better control and use of the solar system shown on the display. The display is backlit (switchable) and also from greater distances and very easy to read under lighting conditions. The LCD solar computer S is designed as a panel version to match the VOTRONIC module system and is both optically and also mechanically (uniform height 85 mm) to the other display modules. Small front panel dimensions and the particularly small installation depth of just 22 mm allows installation at almost any point. If the device is not installed countersunk, stands a corresponding add-on housing is available in our range of accessories. The connection to the solar controller is ready to plug in with the supplied 5 m long connection cable, which can be extended by a further 5 m. Technical specifications: Nominal battery voltage (DC) in [V] 12 and 24 Current consumption max. in [mA] 3 - 30 LC display with specific segments Display function W, A, V, Ah, Wh Measuring range 20 - 990 Dimensions (WxHxD) in [mm] 80 x 85 x 25 Installation dimensions (WxHxD) in [mm] 66 x 72 x 22 Weight in [g] 55 Approval marks CE, E-approval (EMC / vehicle directive) Ambient conditions, humidity: max. 95% room humidity, non-condensing Scope of delivery: 5 m connection cable, fastening screws, operating instructions, drilling template

Product description The Monitor consist of a special Bluetooth connector (S-BC), which delivers, in combination with the Votronic solar charger (MY2013) with the LCD solar computer S, or with the smart Shunt with the LCD battery computer S or the VPC Jupiter, all the information from your monitor to your phone. The corresponding app for Android and IOS is available in both stores. Connecting the Bluetooth module S-BC is incredibly easy. Simply use the included cable to install it between Votronic solar charger and LCD solar computer S or between Smart Shut and the LCD battery computer s / VPC Jupiter. The device has two in- and out-puts, this way you can connect 1 solar charger with LCD solar computer and 1 Smart Shunt with LCD battery computer or VPC Jupiter simultaneously. This way you get all the information on charging, voltage, solar-status, etc. right on your phone without any trouble. Additionally, the app saves the most important data and displays it in the app for extended periods of time. You can even export these files for analysis purposes. This Bluetooth module can just as well be installed after the fact, so whenever you are ready! Technical specifications:  Typ Bluetooth Connector S-BC  Measuments (WxLxH) in [mm] 75 x 47 x 24  Weight in [g] 37  Certifications CE, E-Prüfung (EMV/Kfz-Richtlinie)  Surroundings: Humidity: max. 95%  Scope of delivery: Manual, 2x Cable 6-point connector 1 m long The Bluetooth-Connector S-BC is compatible with the following devices: VOTRONIC Solar-charger in SR- and MPP-technology from 2014 (serial number 14Vxx.xxxxx) Battery Charger, Typ VBCS-Triple LCD battery computer S with Smart-Shunt VPC Jupiter with Smart-Shunt Energy Monitor App via Bluetooth-Connector S-BC        Compatible with LCD-Batterie-Computer S and VPC Jupiter with Smart-Shunt    Compatible with Votronic Solar-charger(SR and MPP) from 2014 with LCD-Solar-Computer S    Solar- and battery-Information thanks to a shared module (Dual-Mode)    Plug & Play    Upgrade any time    Compact form-factor and minimal energy consumption    Connection via Bluetooth 4.0 (2,4 GHz)    Range up to 50 m    Free App (Android and IOS)    Export CSV.files for analysis Android from Android 5.0IOS from iOS 10: iPhone ( 5) or iPad (3. Generation)

OptiMATE solar kit, panels with intelligent charge/monitoring controller. The highly effective solar charger (solar impulse charging system), with which even deeply discharged batteries can still be saved and protected. It guarantees safe and intelligent charging, as the OptiMATE solar battery charging system independently switches between continuous charging or pulse charging depending on the sunshine. OptiMATE analyses the state of the battery the next day and optionally continues charging or - in the case of a defective battery - optimisation. Safe long-term maintenance without the risk of overcharging. Automatic shutdown in the event of a short circuit or as soon as the battery is disconnected. Excellent safety for battery and vehicle electronics Easy monitoring of the battery status with the help of the monitor display, which updates itself every 3 seconds. (current consumption < 0.5 mA). With this battery charging system you get an all-round package, mobile, portable, intelligent. The system is suitable for standard, AGM, LFP and gel batteries. It is supplied with battery terminals and ring eye connections and with German instructions. The solar systems are manufactured to a high standard in South Africa (made in South Africa). Product Information Solar Panels - Solar Charger Info about the solar panels: Power: 40 watts (max.)60 Watt (max.)80 watts (max.) Voltage: 12 V nominal, 22 V maximum Possible uses: Outdoor/indoor Design: High-quality aluminium frame (weatherproof) with 4 mounting brackets, output cable 200 cm with SAE connector Info about the OptiMATE charging/monitoring controller: Charging current:  3.3 A from 40 W panel (max. average current), 3-5 A pulse current. 5 A from 60 W panel (max. average current), 3-5 A pulse current 6.67 A from 80 W panel (max. average current), 3-5 A pulse current Usage: Indoor/outdoor (lowest temperature: -20 °C. Economy mode: start with low 1 V voltage Suitable for: STD, AGM and GEL 12 V batteries with 2 - 240 Ah. Input: 15 - 22 V Design: Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). SAE input connector for solar panel and output cable of 100 cm to be connected to the battery with the supplied weatherproof battery cable and standard battery clamp set. Dimensions (corner brackets included): 40 watt panel: width: 42.9 cm / 16 7/8 " height: 68.6 cm / 27 " depth: 3.3 cm / 1 1/4 "60 Watt panel: Width: 65.9 cm / 16 7/8 " Height: 68.6 cm / 27 " Depth: 3.3 cm / 1 1/4 "80 Watt panel: Width: 68.5 cm / 27 " Height: 78.1 cm / 30 3/4 " Depth: 3.3 cm / 1 1/4 " Optimum safety: there is no risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic cut-off in case of short circuit or disconnected battery. The panels are supplied with a 3 m cable as standard. A suitable extension cable can be found here. Additionally included in delivery are: suitable carrying bag adjustable stand (fixed to the panel) The panel is ideally suited for our parking heater, for example. Please note: When using the panel for a cool box, a buffer is necessary, as the starting current is too high.  Made in South Africa  

Battery box with various connections, AGM or LiFePo battery In the 21st Century modern technology is everywhere, even off-road and off the grid, but more often than not there is no power when you're out and about on some trail in some country.One option is the classic cigarret-lighter as a power source, but in using this frequently you risk decharging your battery to a point where it won't start your car anymore. Another option would be a generator, but those are loud, impractical and noisy. To solve this probem highly portable powerbanks were invented, but for a multiple day long trip a small powerbank just won't cut it.So, what if you had a lagre but portable power bank? One you could simply charge, even off the grid, maybe with a solar panel? And one that is heavy dut enough to endure week long trips and years of use ? Hold on, that's exactly what we did! This compact, but long-lasting Powerstation (33Ah / 35Ah) offers a cigaret lighter-output and two USB-ports (Typ A: QC3.0-Port - Typ C: QC4.0-Port, in a roubust shell. It can simply be charged using our solar panels by Optimate.LiFePo4 batteries – with their lithium iron phosphate cathode material – are perfect for running your camping or work utilities on the road, especially in conjunction with our mobile battery boxes. Unlike your conventional AGM lead-acid technology, the lithium battery combines vastly superior charging/discharging qualities with extremely low weight and small volume, respectively, and a long service life. LiFePo4 batteries tolerate deep discharging without problems, unlike AGM batteries which will suffer irreparable damage when repeatedly discharged beyond 50%. Unless you require the greater tolerance for extreme cold in AGM’s, you should definitely consider the higher initial costs of LiFePo4 batteries and compatible chargers. Enormous weight and space reductions, the long life-cycle and the hassle-free charging and discharging of the battery are strong arguments for the investment. And last but not least: LiFePo4-technology is extremely safe. •    robust shell•    portable design•    comfortable handle•    33 Ah (396Wh) AGM brand battery / 35 Ah LiFePo battery•    20 A car-fuse•    2x USB-plug (Typ A: QC3.0-Port - Typ C: QC4.0-Port)•    1x cigaret-lighter (out)•    1x SAE junction box for charger (charger not included) (in)•    1x On-/Off-switch •    simply plug in and off you go Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.

The most modern 12 V 10 A & 24 V 5 A battery charger in the world! OptiMate 7 12 V-24 V is perfect for 12 V and 24 V starter and deep-cycle batteries requiring accurate temperature-controlled charging and unmonitored, safe long-term expectancy. SPECIAL FEATURES: Tailored to sensitive electronics: The RETTUNGS program is designed to provide a SAFE, fully automatic, low voltage start (starting at 0.5 volts) and IMPULS rescues of deeply discharged batteries connected to very sensitive electronics, such as light aircraft, industrial equipment, etc , Protection against Wrong Voltage Selection: When 24V has been selected and a 12V battery is connected, OptiMate 7 12-24 V immediately warns that a lower voltage has been measured and will not continue charging. The USER must confirm that the rated voltage of the connected battery is 24 V before the RESCUE mode is activated. CHARGING POWER: 10A @ 12 V / 5 A @ 24 V (Ampmatic) USE: Indoor / outdoor (lowest temperature: -40 ° F / -40 ° C). RESCUE: Starting at low voltage of 0.5 V (12 V) + 1-stage desulphation rescue. IDEAL FOR: STD, AGM & GEL 12 V batteries from 3-400 Ah / 24 V batteries from 1-200 Ah. INPUT: Global (100-240 V 50-60 Hz), high efficiency (CEC listed), fully enclosed. DESIGN: Weather resistant housing with wall mount, with 6 ft / 180 cm power cable and 6 ft / 180 cm charging cable with SAE plug. Weather resistant battery lead & standard battery terminal set included. 6 different charging programs: 12 V: 14.4 V (for normal lead acid batteries) 12 V: 14.7 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)12 V: 15 V (for Ca/Ca batteries that need 15 V charge). 24 V: 28.8 V (for normal lead acid batteries) 24 V: 29.4 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)24 V: 30 V (for Ca/Ca batteries that need 15 V charge). SAFE: No risk of overcharging. Absolutely safe for the vehicle electronics. Radio suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery.  

High performance diagnostic charger with test function for LiFePO4 and LFP batteries. Ideal for charging 12.8 V-13.2 V LiFePO4 and LFP high performance batteries with a capacity of 2.5 to 120 Ah. Special advantages: The TUNE mode provides a stable power supply when reprogramming vehicle systems, in car showroom displays, and when saving settings when battery cables need to be disconnected to accommodate power-driven accessory systems or when replacing batteries. BMS Reset and Button Activation - for batteries with resettable low voltage / deep discharge protection. BMS Reset Battery SAV mode: starts at 0.5 V with continuous monitoring and checking of defective or shorted cells; also the charge acceptance can be verified. Unnecessary (and unsafe) charging of a defective battery is prevented. SafeTº: automatic adjustment of the charging current to the ambient temperature determined by the charger. Reduced charging below freezing. Do not charge at temperatures below -20 ° C (to avoid damage to lithium batteries). AmpMatic: Microprocessor-controlled adjustment of the charging current to the ideal charging curve for LiFePO4, matching the battery size / condition, to achieve the fastest possible and complete charge. Technical specifications: CHARGING POWER: 9.5 A (AmpMatic) USE: Indoor / outdoor (lowest temperature: -20 ° C. SAVING MODE: Low Voltage Start at 0.5 V + 3-step Low Voltage SPAR and TEST mode SUITABLE FOR: LiFePO4 (LFP) 4 batteries with 2 to 120 Ah INPUT: global (100 to 240 V, 50 to 60 Hz), high efficiency (CEC listed), fully sealed DESIGN: weatherproof housing with wall mount, with 152 cm power cord and 180 cm charging cable with SAE connector SAFE: No risk of overcharging. Absolutely safe for the vehicle electronics. Radio suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery. 3-year limited warranty.

Accessories for OptiMATE solar battery charging systems Product Informations Extension cable with a length of 4.6 m with SAE connection Length = 15 ft / 460 cm 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures SAE built-in socket Length = 100 cm / 40 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing SAE built-in socket (short cable) Length = 15 cm / 6 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing Plug with rotary adapter, fits on Ø 12 mm MOTORCYCLE / DIN or Ø 21 mm AUTO sockets, with 2-pin SAE connection according to industry standard Length = 20 ″ / 50 cm Industry standard 2-pin SAE connector 8 A fuse (in the plug) Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures With rubber cable gasket for OptiMate heavy-duty SAE connection. Y splitter, SAE IN to 2 x SAE OUTBranching your permanent battery supply line, creation of SAE outputs. Length = 12 ″ / 30 cm Industry standard 2-pin SAE connector. Max. Cable values: 5 Amp -20 ° C / -4 ° F use at very low temperatures With line seals and sealing end caps for OptiMATE heavy-duty SAE connections.  

CHARGE YOUR 12 V - 13.2 V BATTERY WITH ANOTHER 12 V BATTERY! NO ALTERNATING CURRENT REQUIRED Charge the battery of your motorbike, ATV or race boat on the trailer on the way to the event.    OptiMATE DC to DC draws power from your vehicle's battery or from an external 12V battery to save, charge and maintain another 12V-13.2V battery. OptiMATE DC to DC's highly efficient long-term maintenance mode protects the source battery and only draws power when the battery to be charged needs it. The OptiMATE maintenance mode keeps the battery fully charged, never overcharges it, extends its life and improves battery performance. OptiMATE DC to DC can save a deeply discharged, sulphated battery at 2 volts.   CHARGING CURRENT: 2 A APPLICATION: Indoor/outdoor (lowest temperature: -4°F/-20°C). SAVE: Start with low voltage of 1 V IDEAL FOR: STD, AGM & GEL 12V batteries and LFP (LiFEPO4) from 3 - 96 Ah. INPUT: 12-16 V, 2.7 A max DESIGN: Weatherproof housing with wall bracket, with 6 ft/180 cm mains cable and 6 ft/180 cm charging cable with SAE plug. Weatherproof battery lead, standard battery terminal kit and battery terminal kit with fuse included.   SAFE: No risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic switch-off in the event of a short circuit or disconnected battery. 3-year limited warranty (this warranty is independent of the existing free statutory warranty rights. The statutory warranty rights are not restricted by this warranty).