Portable Powerstation with LiFePo or AGM battery, with multiple out outlets

Full Control Over Your On-Board Voltage: The Nakatanenga Panel-Mount Voltmeter with Capacity Display! You're on tour, far from the nearest power outlet, and your electrical consumers like the cooler, auxiliary heater, or additional lighting are running at full blast. But how much longer will your battery last? A simple voltage display often gives an inaccurate picture and can be deceptive, especially when high currents are flowing or the battery is a bit older. With our compact panel-mount voltmeter including a percentage capacity display, you'll always have a precise and understandable overview of the state of charge of your starter or leisure battery(s)! This small but extremely useful instrument is a must-have for anyone who relies on a dependable power supply in their vehicle. Why this combination instrument is a gamechanger for you: No more nasty surprises: Recognize early on when your battery is running low. The intuitive percentage display of the remaining capacity is significantly more meaningful than a simple voltage reading and helps you avoid nasty surprises like an engine that won't start or a cooler that has switched off. Protect your valuable batteries: Deep discharges are a death sentence for many battery types! With the capacity display, you'll see in time when things are getting critical and can take action (e.g., start the engine, check solar input, reduce consumers) to protect your batteries and maximize their lifespan. Plan your energy consumption cleverly: See at a glance how much "juice" you really have left. This allows you to make informed decisions about whether the night lighting can stay on for another hour or if it's time to switch off energy-intensive devices. Compact and discreetly integrable: Thanks to its small installation dimensions (Ø 37 mm and installation depth 17 mm), this useful instrument finds a suitable place in almost any dashboard, center console, or custom-built panel. Clear and distinct display: The digits are designed to be easily readable even in varying light conditions, so you can quickly grasp the important information. The state of charge can be effortlessly read even in darkness or in deeply installed locations thanks to the large red illuminated display. Universally applicable: Ideal for your off-road vehicle, camper, expedition mobile, boat, or any other application where you want to reliably monitor the condition of batteries between 5 and 48V. The touch button switches the waterproof and reverse polarity protected device on or off and also toggles between the voltage display and capacity in percent functions. Simple installation for lasting benefit: This instrument is designed for fixed installation into your on-board electrical system. Connection is generally straightforward for anyone with basic electrical knowledge. (When in doubt, we always recommend having the installation carried out by a specialist workshop). Maintain full control over your on-board energy supply! With the Nakatanenga Voltmeter with Capacity Display, you are always well-informed and secure your independence on trips. A small component with great benefit that should not be missing in any well-equipped vehicle! By the way: We also install this LED voltmeter in our battery boxes.

OptiMate Solar DUO charges and maintains ChargeSaves dead batteries from 4 V with its unique pulse charge.The fastest charge is delivered as the "intelligent charge control" selects between pulse and continuous charging depending on sunlight strength. Intelligent maintenance continues the next day if the battery has maintained the charge overnight, otherwise the program returns to the OPTIMIZE step. MONITORINGBattery status is displayed every 3 seconds. Ready indicator for STD, Hi-Performance AGM and Lithium LEP batteries. Draws less than 0.5mA during monitor mode.Automatically switches to CHARGE when solar power is sufficient. MOUNTINGThe OptiMate DUO charge and monitor controller is separate from the solar module and can be mounted near the vehicle or battery for easy tracking of charge and maintenance progress. The solar panel must be mounted and angled to receive direct sunlight. The range / distance between the battery and the panel is 315 cm / 124″. To extend, use OptiMate cable extensions O-03, O-13 or O-23 and insert them between the solar panel and the OptiMate DUO charging monitor. Application noteFor further application information please refer to the product data sheet

Charging cable adapter: CTEK plug/socket to SAE If you are using CTEK-chargers or various peripherals with CTEK-connectors, we can recommend our SAE-to-CTEK adapter cables. You have a choice of SAE-plug to CTEK-socket or to CTEK-plug. The former variation with CTEK-socket is ideal for batteries in motor bikes, boats or camper vans. Very often they are difficult to access and the adapter makes them much easier to recharge with CTEK-chargers. You don’t need to remove the battery any longer or try to screw or clamp unwieldy jumper cables to the battery posts in tight spaces. Simply plug in the adapter and you have a permanent and safe charging point. This adapter is specifically recommended for anyone already owning a CTEK-charger and intending to use it with our mobile and highly versatile Nakatanenga battery boxes or our portable multi-purpose Diesel heaters. Correspondingly, any CTEK-peripherals you own or anything that has been built into your vehicles using CTEK-connections and requires charging from SAE-devices, can be connected using the SAE-to-CTEK-plug. If you’re ever contemplating switching your systems, you aren’t forced to replace the entire infrastructure, simply chose the appropriate adapter.

The most modern 12 V 10 A & 24 V 5 A battery charger in the world! OptiMate 7 12 V-24 V is perfect for 12 V and 24 V starter and deep-cycle batteries requiring accurate temperature-controlled charging and unmonitored, safe long-term expectancy. SPECIAL FEATURES: Tailored to sensitive electronics: The RETTUNGS program is designed to provide a SAFE, fully automatic, low voltage start (starting at 0.5 volts) and IMPULS rescues of deeply discharged batteries connected to very sensitive electronics, such as light aircraft, industrial equipment, etc , Protection against Wrong Voltage Selection: When 24V has been selected and a 12V battery is connected, OptiMate 7 12-24 V immediately warns that a lower voltage has been measured and will not continue charging. The USER must confirm that the rated voltage of the connected battery is 24 V before the RESCUE mode is activated. CHARGING POWER: 10A @ 12 V / 5 A @ 24 V (Ampmatic) USE: Indoor / outdoor (lowest temperature: -40 ° F / -40 ° C). RESCUE: Starting at low voltage of 0.5 V (12 V) + 1-stage desulphation rescue. IDEAL FOR: STD, AGM & GEL 12 V batteries from 3-400 Ah / 24 V batteries from 1-200 Ah. INPUT: Global (100-240 V 50-60 Hz), high efficiency (CEC listed), fully enclosed. DESIGN: Weather resistant housing with wall mount, with 6 ft / 180 cm power cable and 6 ft / 180 cm charging cable with SAE plug. Weather resistant battery lead & standard battery terminal set included. 6 different charging programs: 12 V: 14.4 V (for normal lead acid batteries) 12 V: 14.7 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)12 V: 15 V (for Ca/Ca batteries that need 15 V charge). 24 V: 28.8 V (for normal lead acid batteries) 24 V: 29.4 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)24 V: 30 V (for Ca/Ca batteries that need 15 V charge). SAFE: No risk of overcharging. Absolutely safe for the vehicle electronics. Radio suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery.  

Accessories for OptiMATE solar battery charging systems Product Informations Extension cable with a length of 4.6 m with SAE connection Length = 15 ft / 460 cm 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures SAE built-in socket Length = 100 cm / 40 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing SAE built-in socket (short cable) Length = 15 cm / 6 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing Plug with rotary adapter, fits on Ø 12 mm MOTORCYCLE / DIN or Ø 21 mm AUTO sockets, with 2-pin SAE connection according to industry standard Length = 20 ″ / 50 cm Industry standard 2-pin SAE connector 8 A fuse (in the plug) Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures With rubber cable gasket for OptiMate heavy-duty SAE connection. Y splitter, SAE IN to 2 x SAE OUTBranching your permanent battery supply line, creation of SAE outputs. Length = 12 ″ / 30 cm Industry standard 2-pin SAE connector. Max. Cable values: 5 Amp -20 ° C / -4 ° F use at very low temperatures With line seals and sealing end caps for OptiMATE heavy-duty SAE connections.  

CHARGE YOUR 12 V - 13.2 V BATTERY WITH ANOTHER 12 V BATTERY! NO ALTERNATING CURRENT REQUIRED Charge the battery of your motorbike, ATV or race boat on the trailer on the way to the event.    OptiMATE DC to DC draws power from your vehicle's battery or from an external 12V battery to save, charge and maintain another 12V-13.2V battery. OptiMATE DC to DC's highly efficient long-term maintenance mode protects the source battery and only draws power when the battery to be charged needs it. The OptiMATE maintenance mode keeps the battery fully charged, never overcharges it, extends its life and improves battery performance. OptiMATE DC to DC can save a deeply discharged, sulphated battery at 2 volts.   CHARGING CURRENT: 2 A APPLICATION: Indoor/outdoor (lowest temperature: -4°F/-20°C). SAVE: Start with low voltage of 1 V IDEAL FOR: STD, AGM & GEL 12V batteries and LFP (LiFEPO4) from 3 - 96 Ah. INPUT: 12-16 V, 2.7 A max DESIGN: Weatherproof housing with wall bracket, with 6 ft/180 cm mains cable and 6 ft/180 cm charging cable with SAE plug. Weatherproof battery lead, standard battery terminal kit and battery terminal kit with fuse included.   SAFE: No risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic switch-off in the event of a short circuit or disconnected battery. 3-year limited warranty (this warranty is independent of the existing free statutory warranty rights. The statutory warranty rights are not restricted by this warranty).