Das könnte Sie auch interessieren
Highflow sports air filter for Land Rover New Defender L663 Highflow sports air filter for Land Rover New Defender L663 You need 1 piece for: 2.0D (D200/D240) (200/240 hp) year 2/20-9/20; 2.0T (P300/P400e Hybrid) (300/404 hp) year from 2/20; 3.0D (D200/D250/D300) (200/249/300 hp) year from 9/20; 3.0T (P400) (400 hp) year from 2/20; You need 2 pieces for: 5.0T (P525) (525 hp) year from 2/21; Since the combustion engine is basically an air pump - air is sucked in at one end, then burned as a fuel mixture and expelled again at the other end - it benefits when not only individual components are optimized, but the entire system. In addition to chip tuning, which optimizes combustion, the air intake and exhaust system should also be optimized - i.e. tuned - as this is the only way to achieve optimum results and make the most of investments. As is so often the case, the whole is more than the sum of its parts. One of the simplest and cheapest options here is to replace the original air filter with a model with increased air flow. K&N is the inventor and manufacturer of the original when it comes to washable and reusable high-performance air filters. Each air filter is designed for increased performance and a lifetime of durability. The filtering effect remains intact over the entire period. K&N offers a 1,600,000 km warranty on every air filter (filter frame and filter media) in addition to the statutory warranty. Cleaning the K&N air filter is usually not necessary before 80,000 km. You too can rely on the 35 years of experience of the market leader in performance air filters! We offer air filters for almost all cars and off-road vehicles. Buy a K&N and experience the difference: 1,600,000 km warranty. This warranty is independent of the existing free statutory warranty rights. The statutory warranty rights are not restricted by this warranty. performance-enhancing - the higher air flow rate leads to improved acceleration/draft economical: a K&N air filter lasts for the entire service life of your car, motorcycle or off-road vehicle Registration-free Motorsport proven - number 1 in motorsport worldwide Cotton, washable Up to 40% more air flow Saves maintenance costs - no need to buy a new expensive factory paper filter at every inspection Environmentally friendly - its long service life reduces waste and protects trees Cleaning usually only necessary every 80,000 km No more filter changes - the oil-impregnated cotton fabric of the filter ensures a maintenance-free service life, during which the filter only needs to be cleaned and re-oiled from time to time. The filter only needs to be cleaned when a 2-3 mm thick layer of dirt has formed on the filter material. To clean your K&N sports air filter, please only use the K&N cleaning kit provided for this purpose.
Prices incl. VAT;
Robust complete wheel set for New Defender – Mono-Twin Project AT rims Available as 4 or 5 complete wheel set with different tyre sizes.Alloy wheel Mono-Twin-Project ATFor the Landrover New Defender as an authentic NO FAKE Allterrain rim, which is second to none. This means, beside the real exchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts expertise especially for New Defender, suitable for orig. 20 inch works AT series tyres. For New Defender models with standard brakes no further parts are necessary, only for models with large brakes (Brembo) wheel spacers have to be fitted. Furthermore, optimum offsets to avoid grinding contact on brakes or wheel housing/bodywork and to avoid rework in this respect and to offer a perfect appearance and function even without spacers.The rims are available in satin black or terra.Alloy wheel Twin Monotube Projekt-AT 20 9x20", concave for front and rear Offset 40 5x120/72.6 Wheel connection M14x1.5 tapered 60 degrees Wheel load: 1000 kg For tyres: 20" series new Defender Suitable for winter: Yes incl. parts certificate and wheel nuts Summer tyres Radar Renegade R/T+The Renegade R/T+ is the new rugged terrain tyre series of the Radar Tyres Renegade family. This range is designed to offer exceptional off-road performance while maintaining comfort and refinement on the road. On the road, this tyre offers drivers superior handling with a smooth and even ride, while off-road it has the necessary handling of an MT tyre.The Renegade R/T+ offers a look that is both aggressive and rugged with excellent on-road and off-road performance, making it a combination of all-terrain and mud-terrain, offering only the best of both worlds. This range also features a dual sidewall design, offering riders the design choice of mud-penetrating sidewall with dagger-shaped "Side Biters" or the "Skull & Piston" look sidewall with wedge-shaped "Side Biters". These "Side Biters" provide additional traction and sidewall protection.Tyre data: Vehicle type: SUV Wet grip: B Noise emission: 75 dB Use: summer Off-road: yes M+S marking: yes POR marking: yes 3PMSF / snowflake symbol: no Features: Computer-optimised tread block sizes and shapes with multiple lateral grooves and angled sipes provide excellent traction on all terrains. The robust 3-ply construction reduces the risk of punctures and ensures safe handling on all surfaces. The wide, centre tread blocks help balance weight distribution and ensure that the tread wears evenly. Unique, state-of-the-art stone ejection technology that prevents stones from drilling into and lodging in the tread. The price refers to 4 or 5 complete wheels incl. mounting and balancing. This item is bulky goods.Note: For large brake systems from 363mm ø (D) a track widening of 20mm per side must be used.
Prices incl. VAT;
Complete wheel set BF Goodrich All Terrain T/A KO2 on twin monotube project AT 9x20’ ET40 for New Defender Complete wheel set BF Goodrich All Terrain T/A KO2 on twin monotube project AT 9x20’ ET40 for New Defender Available as a complete wheel set of 4 or 5 in various tyre sizes. Aluminium wheel mono twin project AT For the Landrover New Defender as an authentic NO FAKE all-terrain rim that is second to none. This means, in addition to the genuine interchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts certificates especially for New Defender, suitable for original 20 inch factory AT series tyres. New Defender models with standard brakes do not require any additional parts, only models with large brakes (Brembo) must be fitted with track plates as specified in the report. Furthermore, optimum offsets to avoid grinding contact on the brakes or wheel arch/bodywork and to avoid any reworking in this respect and to offer a perfect look and function even without spacers. The rims are available in the colours satin black or terra. Twin Monotube Projekt-AT20 9x20’ aluminium rim, concave for front and rear ET40 5x120/72.6 Wheel connection M14x1.5 tapered collar 60 degrees Wheel load: 1000 kg For tyres: 20" series New Defender Suitable for winter: Yes incl. parts certificate and wheel nuts BF Goodrich All-Terrain T/A KO2 tyres The BF Goodrich All Terrain tyres are true off-road all-rounders and can be reliably controlled on any surface (on-road as well as off-road). The tyres are suitable for use all year round, whether summer or winter, and are therefore also M+S marked. Technical data Rolling resistance: F Wet grip: B Noise emission: 74-75 dB M+S labelling: yes Snowflake symbol: yes The tyre is suitable and permitted for winter use. Excellent propulsion on any terrain Wide notches on the shoulders Tread extension into the sidewall Exceptional resistance and durability (Trigard carcass) Deep, aggressive tread with high sipe density Compared to its predecessor (All Terrain KO), the BF Goodrich All Terrain KO2 offers a 20% more resistant tyre sidewall more composure even under extreme conditions a longer tyre life on any surface 2x longer service life on gravel 15% longer life on tarmac 10% more traction on mud 19% improved traction on snow The price refers to 4 or 5 complete wheels incl. fitting and balancing. This article is a bulky item. Note: For large brake systems from 363mm ø (D), a wheel spacer of 20mm per side must be fitted.
Prices incl. VAT;
Twin Monotube Project AT – uncompromising 20" rim for genuine Defender use For the Landrover New Defender as an authentic NO FAKE Allterrain rim, which is second to none. This means, beside the real exchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts certificate especially for new Defender, suitable for orig. 20 inch factory AT series tyres. For New Defender models with standard brakes no further parts are necessary, only for models with large brakes (Brembo) wheel spacers have to be fitted as mentioned in the certificate. Furthermore optimum offsets to avoid grinding contact on brakes or wheel arch/bodywork and to avoid rework in this respect and to offer a perfect appearance and function even without spacers.The rims are available in satin black or terra. Twin Monotube Project-AT20 Rim, 9x20", concave for front and rear Offset 40 5x120/72.6 Wheel connection M14x1.5 tapered 60 degrees Wheel load: 1000 kg For tyres: 20" Series new Defender Suitable for winter use: Yes incl. parts certificate and wheel nuts Also available as complete wheel sets with different tyres:Radar Renegade or BF Goodrich All Terrain KO2.
Prices incl. VAT;
Complete wheel set BF Goodrich All Terrain T/A KO2 275/55R20 115S on Dezent TV black 9x20” ET43 for New Defender Available as a set of 4 or 5 complete wheels. Dezent TV black alloy wheel for New Defender MY 2020 With load capacities of up to 1050 kg per wheel, the Dezent TV black wheel 20 inch is ideal for off-roaders, vans and SUVs. The all-rounder has a particularly well-balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) provides protection in winter conditions as well as for everyday or work use. Rim size : 9x20" OFFSET : 43 Bolt circle / PCD : 5/120 Surface : glossy black (3-layer paint) incl. parts certificate Tires BF Goodrich All-Terrain T/A KO2 275/55R20 115S BF Goodrich tires meet the expectations of passionate drivers. With BF Goodrich tires, you can easily overcome obstacles and master challenges with ease. This brand is perfect for all road surfaces and weather conditions. BF Goodrich tires offer you good grip and control of the vehicle both on and off-road. Tire model: ALL TERRAIN T/A KO2 Tire width: 275 Tire cross-section: 55 Tire diameter: 20" Load index: 115 Speed index: S Fuel efficiency: F Wet grip: B Volume: 75 3PMSF: Yes The price refers to 4 or 5 complete wheels incl. fitting and balancing. This article is bulky goods.
Prices incl. VAT;
Complete wheel set for Land Rover New Defender - Radar Renegade R/T+ on aluminum rim Dezent TV Black Available as set of 4 or 5 complete wheels. Alloy wheel Dezent TV black for New Defender MY 2020 With load capacities of up to 1050 kg per wheel, the Dezent TV black wheel is ideal for off-roaders, vans and SUVs. The all-rounder has a particularly well-balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) provides protection in winter conditions as well as for everyday or work use. Rim size: 9x20" OFFSET : 43 Bolt circle / PCD : 5/120 Surface : glossy black (3-layer paint) incl. parts certificate Summer tires Radar Renegade R/T+ 275/55R20 120Q P.O.R. The Renegade R/T+ is the new Rugged Terrain tire range in the Radar Tyres Renegade family. This range is designed to offer exceptional off-road performance with on-road comfort and refinement. On the road, this tire offers the driver superior handling with a smooth and steady ride, while off-road it has the necessary handling of an MT tire. The Renegade R/T+ offers both an aggressive and rugged look with excellent on-road and off-road performance, making it a combination of all-terrain and mud-terrain, offering only the best of both worlds. Vehicle type: SUV/ Offroader Wet grip: B Noise emission: 75 dB Load index: 121/117 (load capacity: 1,450 kg) Speed index: Q (160 km/h) Use: Summer Off-road: yes M+S marking: yes POR marking: yes 3PMSF / snowflake symbol: no Features: Computer-optimized tread block sizes and shapes with multiple lateral grooves and angled sipes provide excellent traction on all terrains. The robust, 3-ply construction reduces the risk of punctures and ensures safe handling on all surfaces. The wide, central tread blocks help balance the weight distribution and ensure that the tread wears evenly. Unique, state-of-the-art stone ejection technology that prevents stones from digging into the tread and becoming lodged there. The price refers to 4 or 5 complete wheels including fitting and balancing. This item is bulky goods.
Prices incl. VAT;
Powerful and elegant: Dezent TV black alloy wheel for New Defender and SUV With load capacities of up to 1050 kg per wheel, the Dezent TV black rim is ideal for off-roaders, vans and SUVs.The all-rounder has a particularly balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) protects in winter conditions as well as in everyday or work use. Diameter : 20 Width : 9 OFFSET : 43 Bolt circle / PCD : 5/120 Finish : Glossy black (3-coat paint) Weight : 16,5kg incl. parts certificateAlso available as complete wheel sets with different tyres: Radar Renegade or BF Goodrich All Terrain KO2
Prices incl. VAT;
Nakatanenga CargoBear cross bars There’s only one real alternative for the full CargoBear roof rack: the CargoBear cross bars on their own! If you don’t need the entire cargo platform on your New Defender, because you carry only long work equipment or sports gear like surfboards, skis or kayaks, the cross bars alone will do the job perfectly. The same applies for roof tent campers. For the new 110 Landy this means that the standard setup consists of 3 cross beams for the entire length of the roof. The sturdy bars will give you a roof rack that is significantly more robust than any off-the-shelf rooftop carrier. The cross bars are available single or as sets of 2 or 3. They are 100% identical to the ones we sell in the CargoBear kits, i.e. they are 1,450 mm wide (1,300 mm usable) and 120 mm long. The aluminum bars feature stainless steel bases that connect to the standard roof rail via inserted sliding blocks (included). As with the complete CargoBear platform, the bars can be mounted on two height levels, 80 or 100 mm respectively. Choosing the higher level will ensure that your roof window retains its full functionality. The crossbars feature a very wear and tear resistant matte black RAL 9005 powder-coating. A great number of recessed lashing slots allow you to attach lashing rings, brackets, hooks, stud fittings etc. You can also attach your lashing straps directly, of course. The standard CargoBear accessories will also fit the various lashing and mounting points. Thanks to the modular system, this makes a future upgrade to a full CargoBear platform absolutely hassle-free.
Prices incl. VAT;
Additional Interior Light for Land Rover NEW DEFENDER The new Defender is being marketed as a true workhorse, but – as always – there’s room for improvement when it comes to the practicalities of working with your L663 on a day-to-day basis. One such aspect is definitely the lighting for the load space in the back. The standard set-up is somewhat sparse but most of all it lacks proper roof lights. This is especially problematic since the cargo area is often filled up or modified by installed racks, boxes and the like. Our LED light bar solves this problem with more than sufficient 396 Lumens light intensity. The lightbar is easily installed on the trim above the cargo door and illuminates the entire load space – helping you to quickly find tools and equipment and ensuring safe working conditions day or night. Mounting the roughly 36 cm long and 2 cm wide LED lightbar is really easy. Simply click the two fastening clips into the edge of the upper door trim. The clips’ custom-shape will hold the lightbar firmly in position. Connecting the device to the Defender’s wiring is just as quick by simply pushing the LED bar’s wire behind the trim and pulling it along the D-pillar towards the standard lamp housing by the fuse box. In most cases, you won’t even have to remove the trim panels. Lastly, the LED bar’s connector is simply plugged into the standard lamp’s socket. The bar is activated and deactivated as required by its own touch button. Dimensions: 362mm x 25 mm x 11mm
Prices incl. VAT;
Vision-X clip-on filters for Cannon 4.7" LED spotlights One of the advantages of the Cannon LED spotlights is their flexibility - the clip-on diffusers allow the light colour as well as the light diffusion to be adapted to the respective situation. The following light colours have proven to be optimal: yellow - for fogred - for dustblue - for snowwhite - in all other cases The light diffusion of the Cannon LED driving lamps, which are very narrow and wide as standard, can also be changed: Spot - does not change light dispersion, serves as stone chip protectionEuro - range remains, more illumination to the sideTrail Flood - short range, very wide illuminationWide Flood - low range, maximum illuminationCombo - 80% range, wide illumination - the all-rounder!Elliptical - range slightly shorter, improved illumination to the side compared to the Euro version Furthermore, there are black caps that serve as protection when the headlights are not in use, they do not let any light through. The price refers to one piece of the covers. Delivery does not include any headlamps or accessories that may be shown; these are for illustration purposes only.
Prices incl. VAT;
Ähnliche Artikel
XPL Carbon Roof Cap Kit is a high performance lightbar solution for the roof Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The XPL Carbon Roof Cap Kit by Vision X is an elegant and extremely powerful LED lightbar solution for the roof of new Defenders from MY 2021. The aerodynamically shaped carbon element holds two Vision X XPL Lo Pro light bars. The array of CREE LEDs produces 45 W per bar and a beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL light bar also features backlighting that can be used as daytime running lights. The installation on the roof is minimally invasive. The mounting kit contains a drill template, all required fastening and sealing materials as well as the electric connections. Specifications XPL Lo Pro Lightbars: LEDs: 5W per LED Housing material: Aluminum Light color temperature: 6000 Kelvin Voltage: 9-32V DC Current: 0.75A~7.5A@24V DC - 1.25A~15A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Dual mounting standard Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, E mark IRIS reflector technology The XPL is equipped with a backlit halo that can be used as a daytime running light. (SAE compliant for 20" and below). Scope of delivery: Complete carbon element with two XPL-H9 light strips, brackets and wiring harness including precise fitting drilling template.
Prices incl. VAT;
New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Multi LED Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The Cannon Light Multi-LED "light cannons" from Vision X are extremely powerful additional front headlights for uncomplicated installation in the slot of the standard radiator grille of the New Defender. The 7 Watt LEDs guarantee excellent high beam illumination up to at least 215 m and can be configured with different covers for up to 25 types of use - off-road as well as on-road, for sport or work. The aluminium and polycarbonate lamp housing is as light as it is robust and can be flexibly adjusted. Specifications for Cannon 4.7" MULTI LED: single LED: 7W Housing material: hybrid Light colour temperature: 6000 Kelvin Dimensions: 137/134/94mm Weight: 1,3 kg Voltage: 9-32V DC Current: 2.04A@24V DC - 4.08A@12V DC Vibration resistance: 21.2 Grms Lens material: Acrylic Certifications: CE, RoHS, IEC 62471 Weatherproof German plug The installation is minimally invasive. The installation kit is supplied with a ....contains all the necessary fixing materials and wiring. Scope of delivery: Complete radiator grille kit for New Defender with two CPZ710 GEN2 cannon headlights, brackets and wiring harness including detailed installation instructions.
Prices incl. VAT;
The XPL Curved Lightbar is an extremely powerful installation solution for the slot of the standard radiator grille Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The XPL Curved Lightbar by Vision X is an elegant and powerful LED solution for the lower opening in the standard grille of the New Defender. The array of individual 5 W CREE LEDs delivers a light beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL Curved lightbar also features backlighting that can be used as daytime running lights. The installation is fairly simple and requires roughly 4 hrs. Both the grille’s plastic substructure and the lower opening need to be modified by sawing out specific areas. Detailed instructions, fastening materials and electric connections are included in the delivery. Mounting behind the radiator grille is also possible. Specifications for XPL Curved Lightbar: LEDs: 5W per LED Housing material: aluminium Light colour temperature: 6000 Kelvin Voltage: 9-32V DC Current: 3.12A~8.96A@24V DC - 6.25A~17.92A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Curved high power light bars Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, ECE R112 Thanks to our iris reflector technology and the unique curve of the bar, the XPL Curved series produces a wide spot beam pattern with a range of over 600 metres. Scope of delivery: Complete radiator grille set for New Defender with XPL-HC23 light bar, brackets and wiring harness including detailed installation instructions.
Prices incl. VAT;
New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Single LED, MY 2021
New Defender Integration Kit Bumper with 2x Vision-X Cannon 4.7" Single LED
Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car.
The Cannon Light single-LED "light cannons" from Vision X are extremely powerful additional front headlights for uncomplicated installation in the slot of the standard radiator grille of the New Defender. The LEDs with 40 watts each guarantee excellent high beam illumination up to at least 1000 m and can be configured with different covers for up to 25 types of use - off-road as well as on the road, for sport or work. The lamp housing made of aluminium and polycarbonate is as light as it is robust and can be flexibly adjusted.
The installation is fairly simple and requires roughly 4 hrs. Both the grille’s plastic substructure and the lower opening need to be modified by sawing out specific areas. Detailed instructions, fastening materials and electric connections are included in the delivery.
Specifications for Cannon 4.7" Single LED:
- LEDs: Single LED 40W
- Housing material: Hybrid
- Light colour temperature: 6000 Kelvin
- Dimensions: 137/134/94mm
- Weight: 0,91 kg
- Voltage: 9-32V DC
- Current: 1.67A@24V DC - 3.33A@12V DC
- Vibration resistance: 21.2 Grms
- Lens material: Acrylic
- Certifications: CE, RoHS, IEC 62471
- Weatherproof German plug

- The installation is minimally invasive. The installation kit is supplied with a ....contains all the necessary fixing materials and wiring.
Scope of delivery: Complete radiator grille kit for New Defender with two CPZ110 GEN2 cannon headlights, brackets and wiring harness including detailed installation instructions.