Installation service for warm air ducts for ventilation plates for all models The installation of the warm air duct is carried out at the specified fixed price, regardless of the duration.   Please note: The price refers only to the installation flat rate, including the required plastic conduit. The ventilation plates must be purchased separately.   Depending on whether you want to conduct heat from an external mobile heating box into the interior of the vehicle or from the interior of the vehicle via a permanently installed auxiliary heating system into, for example, a roof tent, you can purchase the following items from us:   Ventilation plates for a wide range of vehicles can be found here. Waluflex warm air pipe End piece for Waluflex warm air hose Permanently installed auxiliary heaters can be found here. Mobile auxiliary heater boxes can be found here.   Please note that built-in wind deflectors may need to be removed when installing a warm air duct through a ventilation grille.   When ordering, please provide your telephone number so that we can arrange an appointment. Installation is only possible on site in Berg near Neumarkt (postcode: 92348).   If you order the flat rate together with the appropriate ventilation plate, the item can also be shipped. If you already have ventilation plates, we can perform the installation service by appointment.  

OptiMATE solar kit, panels with intelligent charge/monitoring controller. The highly effective solar charger (solar impulse charging system), with which even deeply discharged batteries can still be saved and protected. It guarantees safe and intelligent charging, as the OptiMATE solar battery charging system independently switches between continuous charging or pulse charging depending on the sunshine. OptiMATE analyses the state of the battery the next day and optionally continues charging or - in the case of a defective battery - optimisation. Safe long-term maintenance without the risk of overcharging. Automatic shutdown in the event of a short circuit or as soon as the battery is disconnected. Excellent safety for battery and vehicle electronics Easy monitoring of the battery status with the help of the monitor display, which updates itself every 3 seconds. (current consumption < 0.5 mA). With this battery charging system you get an all-round package, mobile, portable, intelligent. The system is suitable for standard, AGM, LFP and gel batteries. It is supplied with battery terminals and ring eye connections and with German instructions. The solar systems are manufactured to a high standard in South Africa (made in South Africa). Product Information Solar Panels - Solar Charger Info about the solar panels: Power: 40 watts (max.)60 Watt (max.)80 watts (max.) Voltage: 12 V nominal, 22 V maximum Possible uses: Outdoor/indoor Design: High-quality aluminium frame (weatherproof) with 4 mounting brackets, output cable 200 cm with SAE connector Info about the OptiMATE charging/monitoring controller: Charging current:  3.3 A from 40 W panel (max. average current), 3-5 A pulse current. 5 A from 60 W panel (max. average current), 3-5 A pulse current 6.67 A from 80 W panel (max. average current), 3-5 A pulse current Usage: Indoor/outdoor (lowest temperature: -20 °C. Economy mode: start with low 1 V voltage Suitable for: STD, AGM and GEL 12 V batteries with 2 - 240 Ah. Input: 15 - 22 V Design: Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). SAE input connector for solar panel and output cable of 100 cm to be connected to the battery with the supplied weatherproof battery cable and standard battery clamp set. Dimensions (corner brackets included): 40 watt panel: width: 42.9 cm / 16 7/8 " height: 68.6 cm / 27 " depth: 3.3 cm / 1 1/4 "60 Watt panel: Width: 65.9 cm / 16 7/8 " Height: 68.6 cm / 27 " Depth: 3.3 cm / 1 1/4 "80 Watt panel: Width: 68.5 cm / 27 " Height: 78.1 cm / 30 3/4 " Depth: 3.3 cm / 1 1/4 " Optimum safety: there is no risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic cut-off in case of short circuit or disconnected battery. The panels are supplied with a 3 m cable as standard. A suitable extension cable can be found here. Additionally included in delivery are: suitable carrying bag adjustable stand (fixed to the panel) The panel is ideally suited for our parking heater, for example. Please note: When using the panel for a cool box, a buffer is necessary, as the starting current is too high.  Made in South Africa  

Armytek Zippy Keychain Flashlight Armytek, Canadian manufacturer of high quality flashlights for extreme tasks, have developed a small and light keyring lamp for your pocket. Unlike Armytek’s extreme outdoor flashlights Tiara or Wizard, the Zippy is truly an everyday item. Zippy sounds like Zippo, the legendary reusable lighter, and that’s most likely no coincidence because, like the Zippo lighter, the Zippy lamp is small, compact and absolutely reliable. The Zippy is 9 mm thin and weighs only 12 g. In stark contrast to many other keyring lights, usually given away as branded merchandise, the Zippy is a proper multifunctional flashlight with 3 light modes, 160 OTF Lumen and 15 m beam distance in the brightest setting. The wide-angle illumination is a great help when you need to orient in the dark or want to find a misplaced item. There is also a low light “firefly” mode to find a keyhole and a brighter ambient light setting for quick repair jobs. It will be more than enough light to change a tire or a fuse, fix starter cables to a car battery and a lot more. The integrated 100 mAh Li-Pol battery lasts 17 min in the brightest mode and 10 h in the darkest. It is recharged via USB. The Zippy’s housing is water- and dustproof to IP67 standard and protected by stiffening ribs. Its ring attachment is made from metal and firmly integrated into the construction. There’s no breaking it off or tearing it out of the housing. And then there’s another great design feature you’ll appreciate if you hate disposable gadgets as much as we do: The transparent plastic housing is neither glued nor permanently pegged. It can easily be opened by four screws in case it is damaged or something needs to be fixed on the inside. The likelihood of failures, however, can be gauged by the fact that the Zippy comes with a 5-year no-hassle warranty. Armytek is a Canadian brand for high qualtity multi-flashlights for extreme performance in job and hobby. As the brand name suggests, the products are designed to correspond to military standards regarding functionality and quality.Brightness up to 160 OTF Lm.Beam distance up to 15 m.Built-in Li-Pol 100 mAh battery.5 years no-hassle warranty. Specificationavailable in blue, yellow, green and gray Light & OpticsLED light output: 200 lmOTF light output: 160 lmBeam distance: 15 mStabilization of brightness : FULL (constant brightness)Hotspot: 60°Spill: 110° Dimensions & WeightLength: 59 mmWeight : 12 g Body & DurabilityBody material : PlasticWaterproof & Submersible: 1 mWaterproof and dustproof standard : IP67Operation temperature : -10...+40 °CImpact Resistance: 2 m Modes & ElectronicsPower source: Li-Pol 100 mAhNumber of modes: 3Runtime for maximal mode: 17 minRuntime for minimal mode: 10 hAbility to use batteries with a flat contact:Protection from accidental switch-on: yes Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.

Jumper cable 6m length, max. 1200A The 6 metre long jumper cable offers quick help for weak 12 V or 24 V batteries. It is suitable for all petrol and diesel engines in cars and trucks.The copper mesh enables the cable to make optimum contact. The extra strong cast brass pliers prevent sparks and electric shocks thanks to their insulated handles. The scope of delivery includes a carrying bag for the jumper cable.Technical data:- Length: 2 x 6 m- Cable cross-section: 70 mm²- Max. load: 1,200 A (terminal)- Colour: red / black