Spare wheel air pressure regulator with matching bag Function stacking is when you try to get by with fewer objects because you assign several functions to them. This is particularly important when you have to take space and weight into account when travelling or on expeditions. A spare wheel, for example, is usually just a spare wheel, but with our spare wheel air pressure regulator, the fifth wheel on the vehicle can also become a practical compressed air reservoir. If you inflate your spare tyre to the permitted maximum, you usually have enough pressure available to adjust the inflation of the tyres mounted on the axle or on the mountain bike or to operate compressed air devices such as our Showertube, for example. As the name suggests, our spare tyre pressure regulator basically functions simply as an adjustable equalising valve.The desired pressure is simply preset on the integrated regulator and the two hoses are attached to the "pressure receiver" and then to the spare wheel (compressed air reservoir). The pressure is then exchanged automatically. The spare wheel pump also has brackets for permanent installation and a robust and easy-to-clean nylon PU-coated bag for storage in the car.    

Escapade Constant Duty Compact  Onboard Air System For up to 37″ TiresP/N 50003 – 110/145 PSI – 150 PSI / 1.80 CFM VIAIR’s Escapade Constant Duty Compact Onboard Air System is a compact, pre-packaged compressed air solution that features an industry-leading, 150PSI rated, 100% duty 450C compressor, an extruded aluminum tank, and all components needed to install a working system capable of tire inflation and air locker actuation. This OBA System comes complete with an onboard pressure switch, automatic coupler and a tire Inflation Kit. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI  Max. Working Pressure: 150 PSI Max. Amp Draw: 23-Amps Ingress Protection Rating: IP67 Dimensions: 9.38″L x 4″W x 6.75″H Net Weight: 12.5 lbs. FEATURES 450C 150 PSI VIAIR Compressor w/ Thermal Overload Protector (1) Extruded Aluminum Air Tank (1) Sealed Pressure Switch (110 PSI on, 145 PSI off) (Pre-installed) (1) Sealed 40-Amp 4-prong Relay with pre-wired female socket (1) 40-amp Relay Sealed 4-prong relay w/pre-wired female socket (1) Tire Inflation Gun with 160 PSI Gauge (1) 30ft. Coil Hose with Quick Connect and Stud (1) Rubber Tipped Blow Gun (1) Quick Connect Coupler (Pre-installed) (1) 1/4″ 175 PSI Safety Valve (Pre-installed) (1) 1/4″ NPT Plugs Kit (Pre-installed) (1) 1/8″ Drain Cock (Pre-installed) (1) 1/4″ NPT to 1/8″ BSP Adaptors (2) Air Filter Housing w/ Replacement Air Filter Elements (1) 20ft. Freeze Resistant 12-Gauge Wire w/ Inline Fuse Holder (1) FILL RATES31″ X 10.5″ 0 to 30 PSI 4 min. 05 sec. (±10 sec.)15 to 30 PSI 2 min. 10 sec. (±05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 30 sec. (±15 sec.)15 to 30 PSI 2 min. 50 sec. (±05 sec.)35″ X 12.5″ 0 to 30 PSI 6 min. 55 sec. (± 15 sec.)15 to 30 PSI 3 min. 30 sec. (± 10 sec.)37″ X 12.5″0 to 30 PSI 7 min. 56 sec. (± 15 sec.)15 to 30 PSI 4 min. 09 sec. (± 10 sec.) Please Note: Use thread sealant for proper installation. Thread tape is not recommended.Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.

VIAIR Compressor Kit - CONSTANT DUTY Compressor system kit from VIAIR CONSTANT DUTY OBA version with compressor 450C delivery rate 51 L/ minute for 12Volt operating voltage incl. 9.5L tank and mounting kitTechnical data:     suitable for inflating tyres and operating small air tools or air horns    max. voltage: 13,8 Volt    max. 10 bar working pressure    max. current consumption: 23 amps    max. ambient temperature for operating the compressor: 70° Celsius    min. Ambient temperature for compressor operation: -40° Celsius    max. possible operating time e.g. at 22°C ambient temperature approx. 60 minutes    Protection class: IP67Exemplary filling times for the compressor system kit of VIAIR design CONSTANT:Air receiver with 10 litres : - 0 to 9.9 bar - 3 min. 02 sec. - 7.5 to 9.9 bar - 59 sec. Tyre size 35" x 12.50" :- 0 to 2.0 bar - 6 min 55 sec.- 1.0 to 2.0 bar - 3 min. 30 sec. Tyre size 37" x 12.50" : - 0 to 2.0 bar - 7 min 56 sec. - 1.0 to 2.0 bar - 4 min. 09 sec.Compressor system kit from VIAIR model CONSTANT has the following scope of delivery:1 x VIAIR 450C compressor 1 x 9,5 l air tank 1 x 10m air hose 1 x 1/4" quick coupling (F) 1 x 1/4" NPT connector (F) 1 x Control panel with on/off switch and pressure gauge 1 x Pressure switch with relay (7,2 - 10 bar) 1 x Reducer (1/8" NPT F to 1/4" NPT M)

Practical Shoulder Strap for diffrent Recovery Tracks It takes a lot to get a 4x4 stuck in some sand or mud and if there is no going forwards or backwards, Recovery Tracks are usually one of the first and best solutions. To make operating these Recovery Tracks now even more intuitiv the versitile and robust shoulder straps can be used in various ways.    The strap can easily be attatched and detached from the track. The sewed on net-pocket contains an additional strap, which can be attatched right to the track, this way the tracks can be easily pulled back out of the deepest mud without you having to get dirty yourself.  100% NylonBuckle: Decal / ITW / Duraflex <iframe width="560" height="315" src="https://www.youtube.com/embed/v6Acrsdx610" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Fender extensions universal This broadening in discreet optics is suitable for vehicles with and without inner edge in the wheel arch. Ideal for widening spacers, wider tires, rims with greater press-in depth, etc. Available in different widths: 18 mm, 23 mm, 28 mm - please select the desired widthLength: 150 cm Suitable for: car, SUV, VAN, trailer, camper, construction machine, agricultural machine, etc. Attention - installation instructions: The adhesive tape that we use for this profile is the best that we have: Article 3M 4222If the extension fender will be applied on a normal situation, we don not need to use Primer.The important is to follow the correct fitting instruction: 1)      Perfect cleaning of the surface that will receive the adhesive tape2)      Position the profile and apply using a strong pressure for all the length of the adhesive tape3)      Correct temperature for the application: minimum + 20°C4)      To be sure that the adhesive tape is working correctly, you can apply a masking tape, to keep the pressure for the next 24 hours5)      Do not wash the car for 48 hours after the application

Fresh Air for Your Defender 110/130 – Secure and Insect-Free! Fresh air for your Defender 110/130 – safe and insect-free! The Defender 110 is synonymous with rugged off-road culture. Good air circulation, as if the windows were slightly open, but without any increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito netting, made of sturdy aluminum and tailored to fit the Defender 110/130, achieve just that — no rattling universal parts. Supplied in pairs, powder-coated in black, they offer discreet protection and comfort on expeditions or when used as an everyday vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 505 mm.

VIAIR Tyre Pressure Tester with Drain Function When driving on Sand it is a common practice to air-down the tires to gain more traction. The problem is should you air down to much, you risk damaging wheel and tire, and if you don't air-down enough the desired effect doesn't show. Also, after your done playing in the sand your tire pressure needs to get back to a comfortable riding pressure. In order for your tires to always have the right pressure this gauge also packs a deflate button, so you always know whats going on with out experimenting around. The Instuctions are simple and wel known from gas-stations: attatch, gauge the pressure, air down using the lever, gauge again and done. Available in two different versions, depending on the size and pressure range you're working in. Modell Diameter Pressure range 00032 38mm / 1.5" 0-4.1 bar (60 PSI) 90073 64mm / 2,5" 0-6.9 bar (100 PSI)