Modular vehicle panel for Land Rover New Defender, rear outside, left or right

FIXPLUS Strap 35cm long, dark grey or orange Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious. Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & garden  Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching  Secure: guarantees a stable hold even with strong vibration & knocks even after frequent use, tear-resistant, elastic and flexible  Durable: heat & cold-resistant (-30°/+60°C), seawater-resistant, UV-resistant FIXPLUS Strap 35:  in the colours dark grey or orange  35cm long - 2.3cm wide - 22g light  circumference up to 30.5cm  tensile force: 900N / 90kg  can be assembled and thus extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.

Safe storage for gasoline, diesel, and more The bulkheads are sealed and everything is stowed away perfectly, right? Anyone who goes on a long trip knows the satisfying feeling of having everything packed away safely yet within easy reach. At the same time, however, there is always that nagging feeling in the back of your mind. This or that item takes up unnecessary space or has to be secured in a cumbersome way. Couldn't it be better?   Don't worry, it can be better. At least when it comes to our fuel canisters made of sturdy plastic. The 5 and 10 liter gasoline or diesel containers are stackable—even when mixing sizes—and therefore extremely space-saving. Whether in an off-roader, boat, or camp, the interlocking molded side walls ensure that the canisters fit together and cannot slip. The round recesses in the middle (one for 5 L, two for 10 L) are designed to secure the containers in a rack or with a strap. This makes it easier to secure the canisters in a block and guarantees optimum load security even when the vehicle is in the most unstable position off-road. The red Adventure Tanks for fuel come with a flexible screw-on spout.   Incidentally, the canisters are also available in gray for drinking water.   Size: 5L, 10L Color: red   Dimensions of 5-litre canister: 36 x 27 x 9 cm (including cap) Dimensions of 10-litre canister: 53 x 36 x 8.5 cm (including cap)

Nakatanenga window vents / ventilation grilles for the rear side windows of the Land Rover New Defender, from model year 2020 The new Defender combines modern technology with proven off-road capability. Good air circulation as if the windows were slightly open, but without the risk of rainwater or theft? Plus effective protection against insects? That's what our ventilation panels with mosquito nets offer, made to fit the New Defender perfectly from high-quality aluminum—no wobbly universal parts. Supplied in pairs and powder-coated in black, they complement the modern design discreetly and sensibly, especially when camping or on expeditions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Suitable for Defenders built from 2020 onwards. Length: 550 mm  

Bumper protection in different colours What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper? Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects. Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee. The protective wrap is available in black, matt black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme. Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer. Available in Black, Matt Black, Anthracite, Silver or Matt Transparent*, the protective film perfectly matches the look of the new Defender, regardless of its paint finish or colour scheme. Please note:The transparent version differs from the other versions in terms of price and workmanship, as it uses a specially developed, UV-stabilised film. This film is specifically designed to minimise material yellowing caused by UV radiation and ensure long-term visual stability.The transparent film MUST be applied wet! For professional application, we provide detailed installation instructions and the necessary processing materials. Instructions for wet application: Fill a spray bottle with water and 1–2 drops of washing-up liquid (or mounting/application solution). Remove coarse dirt from the loading sill with a damp cloth and then clean thoroughly with the enclosed cleaning cloth – the surface must be clean and dust-free. Spray the loading sill evenly. Remove the protective film from the film and also spray the adhesive side lightly (so that it does not stick immediately). Apply the film and align it carefully. The moisture allows it to be moved around. Squeegee out the water, working from the centre outwards. Apply even pressure to remove the water and air bubbles. Remove any excess liquid with a cloth. The film is fixed after squeegeeing, but only reaches its final adhesion after 24–48 hours.   During this time: Do not wash, do not use a high-pressure cleaner. Keep as dry as possible and avoid mechanical stress.    

Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.

Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, LHD The open dashboard design in the New Defender is no coincidence, of course. This is where the impeccably modern cockpit by design director Gerry McGovern and colleagues pays homage to the interior of the classic Defender, the original Landy. Good for us, because we immediately spotted an opportunity to improve storage capabilities: with our nifty dashboard bag for the New Defender. The open dashboard shelf is where you put all the odds and ends in your car. It was like that in the old Landy, it will probably be the same in the new one. But once you’re testing the L663’s tilt angle or maximum gradient, our new dashboard bag, made from easy-to-clean, robust nylon, will keep your stuff from actually flying around. Installing the bag firmly in the dash takes only a few minutes. The zipper has two sliders so that the bag can be opened and shut from both sides. On the inside, mesh compartments and Velcro fleece allow for organized and secure storage of all kinds of items. The front features MOLLE fleece to attach patches and other little things. Since the New Landy sports a designer cockpit, we used transparent plastic material on top of the bag. This allows for the ambient LEDs in the dashboard and the day light from the opening above to filter through into the bag’s interior. The dashboard bag comes in New Landy compatible colors black, gray and coyote. Installation does NOT require drilling, glueing or other damaging methods. It is completely reversible. We include a detailed installation guide. LHD

Wind Deflector ClimAir Land Rover Defender TYP L663, front or back Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic.  There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Defender’s windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Defender 90,110 und 130, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in transparent, smoke grey or black and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.  Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately. suitable for New Defender 90,110 and 130 from 2020 onwards

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: For this product, we use nylon fabric with a polyurethane (PU) coating. Both the fabric and its coating are PVC-free. Flexible PVC materials may contain phthalate-based plasticisers, some of which are legally restricted due to their potential health risks. That's why we deliberately avoid PVC in this product and opt for a high-quality PU coating instead – a more expensive alternative for us, but one we've consciously chosen.

Molle panel for the rear window - damage-free installation without drilling The bigger the vehicle, the greater the temptation to leave everything lying around. But especially in space monsters like the New Defender with its maximum load compartment volume of over 2500 litres (in the 130), it is extremely important to keep everything tidy and have quick access to equipment and accessories. Our modular panel for the rear window is the perfect organiser for the most important and most frequently used equipment. The aluminium window panel is simply attached to the window using suction cups and is compatible with all Molle products in our range. The possibilities for combination and personalisation are therefore virtually endless: whether you want to stow several MOLLE bags, the first aid kit or something else neatly with our tensioning and fastening straps, this modular panel makes it possible. FixPlus Straps are also a good addition. And if you don't need the panel at the moment or if you sell the vehicle, it can be dismantled without leaving a trace. Material: ALUMINIUM Scope of delivery: 1 vehicle panel incl. fastening material