More Ground Clearance and Off-Road Performance for Your Defender 90: The TREKFINDER Suspension Lift Kit +40mm! Do you want to take your Land Rover Defender 90 where others have to turn back? Are you looking for more ground clearance, better approach and departure angles, and an even more imposing look for your iconic vehicle? Then we have exactly what you need: the TREKFINDER suspension lift kit for your Defender 90, raising it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a more aggressive look, but also noticeably improve its off-road capability. Whether you're battling through deep ruts, mastering rocky passages, or just want to keep an overview in the urban jungle – the additional 40 millimetres make the difference. Why TREKFINDER for Your Defender 90? More Ground Clearance: Overcome obstacles more easily and ensure better underbody protection. Improved Approach and Departure Angles: Master steeper inclines and declines? No problem! Option for Larger Tires: Create space for larger tires and thus optimize traction and appearance. Progressive Spring Rate: The specially wound springs are designed to offer optimal performance both unladen and with additional equipment (up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle). For you, this means: comfort on the road and, at the same time, the necessary stability in off-road conditions. Standard Shock Absorbers Can Still Be Used: In most cases, you can keep your original shock absorbers, which makes the conversion straightforward. For the ultimate driving experience, however, we recommend combining them with suitable shock absorbers, such as the TREKFINDER Koni RAID dampers. TÜV Parts Certificate Included: For a hassle-free registration, a TÜV® parts certificate is naturally included in the delivery scope. What's Included in the Set? 4 TREKFINDER coil springs with progressive rate 1 TÜV® parts certificate This suspension lift kit is suitable for various Land Rover Defender 90 models (TDI, TD5, TD4 – please refer to the parts certificate for exact model compatibility). Due to the increased angle of the front propshaft caused by the lift, we recommend installing a propshaft with a double cardan joint: Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here. Your Defender. Your Adventure. Your Decision. With the TREKFINDER suspension lift kit, you're investing in more freedom and performance for your Land Rover Defender 90. Discover new paths and experience off-road adventures on a new level. Do you have questions about installation or combining it with other suspension components? Just contact us – we at Nakatanenga are happy to advise you!

Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair

Girling shock absorber, front For front, short wheelbase For the following series:    Series I - 1954-1958    Series II    Series IIA    Series III These traditional hydraulic shock absorbers feature fluid and seal technology to keep your Land Rover suspension under control.

Girling shock absorber, rear For rear, short wheelbase For the following series:    Series I    Series II    Series IIA    Series III These traditional hydraulic shock absorbers use fluid and seal technology to keep your Land Rover's suspension under control.

Girling Shock Absorber, front For front, long wheelbase. For series:    Series II    Series IIA    Series III These traditional hydraulic shock absorbers use fluid and seal technology to keep your Land Rover's suspension under control.

If your Landy is not just a Chelsea tractor and regularly has to tow more than one kind of trailer, the odds are you will need an adjustable tow hitch. The first advantage over a static solution, of course, is the fact that you can adjust the height very easily just by moving slider and pin. Secondly, and more conveniently, you can also permanently mount several different tow systems to a number of slider plates. That means switching coupling types like tow ball, jaw or NATO is literally a matter of seconds. Pull the pin out, switch the slider plate, push the pin back in. Done. No screws, no nuts or bolts to fasten. The adjustable tow hitch is available for TD5/TD4 90, 110 and 110/130 high capacity pickup and comes as a complete assembly kit with the necessary chassis struts, the bracket for the rear cross member, mounts for electrics, slider frame, slider plate with tow ball, a choice of 7- or 13-pin electric coupling and all necessary fastening materials. Most importantly: the assembly kit is certified by an attached E-number (E11 for UK as country of origin) and that means the parts are road legal and you are not obliged to get additional certification or separate technical approval as may be required otherwise in your respective country. The number with the capital “E” stands for a general type approval within the ECE treaty. This includes the EU, the EEC, USA, Canada, Australia, Japan and many other countries worldwide. To be on the safe side in traffic stops, however, it is advisable to have the E-number on the part well visible and the part documents should preferably be with your registration papers in the vehicle.

Suspension for Land Rover Defender 130 Lightweight Set consists of:  1x TREKFINDER lift spring set for Land Rover Defender 1102x shock absorber for Land Rover Defender 90 / 110 / 130 front axle2x shock absorber Koni Heavy Track RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     

Nakatanenga Seat Cover for Defender TD4 ('07 +) Nakatanenga seat covers for Land Rover Defender Td4 from 2007 These seat covers are now even more accurate than the previous ones and thus provide the ultimate protection with the highest comfort. Seat and back is made of high quality and breathable mesh material. The driver's and front passenger's seats are equipped on both sides with pratic Laser Cut Molle. This can also be found at the back of the seats. Furthermore, the driver and front passenger seats on the back have both a card pocket and a zipped pocket. The Molle offers a variety of possibilities. For example you can attach our practical bag set, with our tightening and fastening belt set fix small items or stow a first aid scissors within reach. The high-quality Laser Cut Molle on the backs of the backrests and on both sides of the front seats allows you to attach many different accessories. Driver or passenger side is 2-pieces each. (Seat cover + headrest)Rear seat is 5-pieces (3 headrests, 1 small cover, 1 large cover) Product features: large map pocket on the back of the backrest zipped pocket on the back of the backrest vlecro / loop tape on the headrests lasercut Molle attachment system for attaching additional bags or equipment (partially on the side and on the backrest) washable at 30 ° C perfect fit, no slipping extremely stable the customized slipcover is suitable for Land Rover Defender Td4 from 2007 Material: 1000D nylon PU coatedWashable 30-60° C Available: in black for front and rear seats Bundle: 2x seat covers for the front seats and 1x cover for the complete rear seat Please select the desired variant. Please note:In the variant "front" 1 piece is delivered - driver and passenger side have the same reference. So if you want to order a cover for the driver and front passenger side, you have to order 2x the variant Front.

VB Air Suspension - Air suspension for Land Rover Defender 90/110/130 Air suspension for Land Rover Defender 90/110/130.Optionally for rear axle or front and rear axle.The VB Air Suspension System is only sold incl. (chargeable) installation in our company - for this we offer fixed prices.

Your Defender 90 Can Do More: With the 3.5t Towbar for Td5 & Td4! You drive a Land Rover Defender 90 (Td5 or Td4) and want to make full use of its transport capabilities? Then we have just the thing for you! Our towbar is tailor-made for your Defender 90, turning it into a real workhorse without compromising on stability. Here's what you can expect: Power for Heavy-Duty Tasks: With a towing capacity of up to 3.5 tons, you can master even demanding transport jobs. Ready to Go Immediately: A suitable towball is already included in the delivery. Safety First: The towbar is E-approved, thus meeting all important safety standards. Flexible Connection of Your Choice: You decide whether you need a 7-pin or a 13-pin electrical kit with a multi-connector for your electrical connections. Perfect Fit: Specifically developed for all Defender 90 models of the Td5 and Td4 series. Whether you're off-roading, need materials for your next project, or want to transport your leisure equipment – this towbar will reliably support you. Make your Defender 90 even more versatile! Get the robust towbar from Nakatanenga now!

Spring lift-kit for Land Rover Defender 110, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains: * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.